G-Force UNDER CONTROL CP-28 User manual

G-FORCE
Under control
CP-28
USER MANUAL
English V.1.2
USB Game Control Panel
Product Description
Installation on PCTable holder THA1
Control panel CP-28 is a full programmable device that
allows you to assign functions from your simulator or
game. You can control the functions with switches and
encoders. The panel is great for flight simulators, but can
also be fully used for any other simulators or games. In
the basic mode, this panel allows the control of 24 button
functions and 2 encoders for entering values. If your
simulator or game supports the mod-switch function, you
can use the panel to control up to 80 buttons and 8
encoders using the "MODE" rotary switch.
The device has a compact small size and is very easy to
use. You do not need to install any drivers. It is full
compatible with USB 2.0 and Windows operating
systems.
1/ Connect the USB (B) connector on the back side of the
panel.
2/ Connect the USB (A) connector to one of your
computer’s USB ports. Windows 7 or higher will
automatically detect the new game device.
3/ The drivers are installed automatically.
4/ Click Start/Settings/Control Panel and then double-
click Game Controlers. The Game Controllers dialog
box display the joystick name "G-FORCE CP28" with OK
status.
5/ In the Control Panel, click Properties to configure
your joystick. Test device: Lets you test and view all of
your panel functions.
The holder THA1 is fixed to the panel with M5 screws and
is ready to use . Fig.1
The holder is adjustable in three operation positions,
(1) position flat, (2) angle 25 °, (3) angle 40°. Fig.2
Thak you for purchasing a G-FORCE product. Our
passion is the development and production of gaming
devices for all enthusiasts of simulators and games. G-
FORCE manufactures and develops a range of control
panels for simulator and game enthusiasts. We produce
a limited number of custom devices, it is not serial
production. In our products you will find a functional
design, user-friendly controls and a quality selection of
components. We produce plastic parts using 3D printing
technology and all parts are specially designed for our
products. For more informations and news please visit
our website www.g-force.sk.
We wish you a lot of great gaming experience with G-
FORCE by controlling your planes, tanks, ships, cars or
your favorite games.
-1-
-3-
Fig.1
Fig.2
Flat
25° 40°
-2-
With control panel CP-28 you can control 28 joystick buttons.
You are ready to play!

-4-
-6-
-5-
Device Layout
Technical Parameters
Model name
CP-28
Engine
32 Bit processor
Controls
24 Buttons + 2 Encoders
Connection
USB 2.0 / USB 3.0
Compatibility
Windows 7 or higher
Power
USB 5V / 250mA
Size
180mm x 125mm x 75mm
Weight
370g / 420g with holder
Package Contents
1x
CP-28 Control Panel
1x
Table Holder THA1
1x
USB Cable
2x
Hex keys 2.5mm / 3mm
1x
English manual
System Requirements
PC with a free USB port
Windows 7 or higher
R
R
S
Controls Description
1
Rotary encoder 1, value +/-, with push button "PS1"
2
Rotary switch 5 position 1xOFF / 4xON "MODE"
3
Rotary encoder 2, value +/-, with push button "PS2"
4
Slider switch ON/OFF - ON/OFF, "SLD1/2"
5
Momentary toggle switch (ON)-OFF-(ON), "S1,S2"
6
Self locked toggle switch ON/OFF - ON/OFF, "GEARS"
7
Self locked toggle switch ON/OFF - ON/OFF, "FLAPS"
8
Momentary toggle switch (ON)-OFF-(ON), "S3,S4"
9
Slider switch ON/OFF - ON/OFF, "SLD3/4"
10
Momentary push button switch (ON)-(OFF), "PS3"
11
Momentary toggle switch (ON)-OFF-(ON), "S5,S6"
12
LED Power On
13
Momentary toggle switch (ON)-OFF-(ON), "S7,S8"
14
Momentary push button switch (ON)-(OFF), "PS4"
Waranty Information
Enviromental Protection Recommendation
G-FORCE (the manufacturer) offers limited warranties for a period of two (2) years
from the original date of purchase against all manufacturing defects.
Under its warranty, aims to have G-FORCE ship either a complete replacement unit if
necessary, or needed replacement parts for self-installation. Customers replacing
parts themselves will not void their existing warranty. The decision whether a
replacement unit or spare parts are needed is made by G-FORCE on a case-by-case
basis.
The manufacturer’s warranty does not cover accidental damage, or damage caused to
the unit on purpose to require a repair or replacement. This includes, but is not limited
to: excessive filth, excessive force, dropping the unit, submerging the unit in water, or
shorting out the circuits of the unit. G-FORCE reserves the right to make a
determination as to the nature of the defect and whether or not it was caused
intentionally. Intentional damage will void the warranty and no further attempts to repair
or replace will be undertaken by the manufacturer.
Proof of Warranty coverage are the sales receipt or sales record.
The G-FORCE manufacturer warranty is non-transferable.
Contact for technical support and warranty.
G-FORCE, Pluhova 34, 83103 Bratislava, Slovak Republic, EU
Wesite: www.g-force.sk email: [email protected]
At the end of its working life, this product should not be disposed of
with standard household waste, but rather dropped off at a collection
point for the disposal of Waste Electrical and Electronic Equipment
(WEEE) for recycling.This is confirmed by the symbol found on the
product, user manual or packaging.
Depending on their characteristics, the materials may be recycled.
Through recycling and other forms of processing Waste Electrical
and Electronic Equipment, you can make a significant contribution
towards helping to protect the environment. Please contact your ocal
authorities for information on the collection point nearest you.
Programming with software FreeJoyQT
This panel is full programmable with using FreeJoyQT software.
This software you can free download from website www.g-
force.sk, or from website https://github.com/FreeJoy-
Team/FreeJoyConfiguratorQt.
Learn more how to use configuration software with G-Force
panel on our website: www.g-force.sk.
WARNING: By changing some parameters in configuration
software , you can cancel the correct functionality of the panel !