G-Force UNDER CONTROL SP-35 User manual

G-FORCE
Under control
SP-35
USB Switch Control Panel
Product Description
Table holder THA1
Replace buttons and labels
Switch panel SP-35 is a full programmable device that
allows you to assign functions from your simulator or
game. The panel is fully compatible with PC USB with
Windows operating system. You can control the
functions with 35 green backlight button switches.
The switch on the side of the panel is used to turn (off-on)
the backlight. All buttons can be changed to different
colors according to the user's needs. There are (5x4)
buttons on the edge of the panel for easy control of the
MFD buttons in the cockpit of modern aircrafts. The
description on the buttons and the color configuration
can be full customized by the user. The panel comes with
a set of 100 pre-cut labels that are used in the cockpits of
modern airplanes. The positionable stand THA-1
provides a stable placement of the panel on the table.
The holder THA1 is fixed to the panel with M5 screws and
is ready to use . The holder is adjustable in three
operation positions, flat, (A) angle 25 °, (B) angle 40°.
Fig.1
Remove clear cup (A) and button (B) from the panel. Use
the mini multitool accessory. Be careful, not to damage
the switch. You can find the tutorial video on our website
or on the G-FORCE YouTube channel.
Thank you for purchasing a G-FORCE product. Our
passion is the development and production of gaming
devices for all enthusiasts of simulators and games.
G-FORCE manufactures and develops a range of
control panels for simulator and game enthusiasts. We
produce a limited number of custom devices, it is not
serial production. In our products you will find a functional
design, user-friendly controls and a quality selection of
components. We produce plastic parts using 3D printing
technology and all parts are specially designed for our
products. For more informations and news please visit
our website www.gforcecontrol.com
-1-
-3-
Fig.1
-2-
B - 40°
A - 25°
^
A
B
^
Label
We wish you a great gaming experience
with G-FORCE.
USER MANUAL
English V.1.1
G-FORCE Web
1 2
3 4
5 6
7 8

-4-
-6-
-5-
Device Layout
Technical Parameters
Model name
SP-35
Engine
32 Bit processor
Controls
35 Buttons
Backlight
LED green color
Connection
USB 2.0 / USB 3.0
Compatibility
PC Windows 7 or higher
Power
USB 5V / 250mA
Size / Weight
180 x 125 x 70mm / 400g
Package Contents
1x
SP-35 Control Panel
1x
Table Holder THA1
1x
USB Cable A-B
2x
Hex keys 2.5mm / 3mm
1x
Label set, Mini multitool, Spare buttons set
1x
English manual
System Requirements
PC with a free USB port
Windows 7 or higher
R
R
S
Controls Description
1
35x Push buttons OFF-(ON)
2
Switch - Backlight ON-OFF
Waranty Information
Enviromental Protection Recommendation
G-FORCE (the manufacturer) offers limited warranties for a period of two (2) years
from the original date of purchase against all manufacturing defects.
Under its warranty, aims to have G-FORCE ship either a complete replacement unit if
necessary, or needed replacement parts for self-installation. Customers replacing
parts themselves will not void their existing warranty. The decision whether a
replacement unit or spare parts are needed is made by G-FORCE on a case-by-case
basis.
The manufacturer’s warranty does not cover accidental damage, or damage caused to
the unit on purpose to require a repair or replacement. This includes, but is not limited
to: excessive filth, excessive force, dropping the unit, submerging the unit in water, or
shorting out the circuits of the unit. G-FORCE reserves the right to make a
determination as to the nature of the defect and whether or not it was caused
intentionally. Intentional damage will void the warranty and no further attempts to repair
or replace will be undertaken by the manufacturer.
Proof of Warranty coverage are the sales receipt or sales record. The G-FORCE
manufacturer warranty is non-transferable.
Contact for technical support and warranty.
G-FORCE, Pluhova 34, 83103 Bratislava, Slovak Republic, EU
Wesite: www.gforcecontrol.com email: [email protected]
At the end of its working life, this product should not be disposed of
with standard household waste, but rather dropped off at a collection
point for the disposal of Waste Electrical and Electronic Equipment
(WEEE) for recycling.This is confirmed by the symbol found on the
product, user manual or packaging.
Depending on their characteristics, the materials may be recycled.
Through recycling and other forms of processing Waste Electrical
and Electronic Equipment, you can make a significant contribution
towards helping to protect the environment. Please contact your ocal
authorities for information on the collection point nearest you.
Programming with software FreeJoyQT
This panel is full programmable with using FreeJoyQT software. This software you can
free download from website www.gforcecontrol.com, or from website
https://github.com/FreeJoy-Team/FreeJoyConfiguratorQt. Learn more how to use
c o n fi g u r a t i o n s o f t w a r e w i t h G - F o r c e p a n e l o n o u r w e b s i t e :
www.gforcecontrol.com
WARNING: By changing some parameters in configuration software , you can cancel
the correct functionality of the panel !
Installation on PC
1/ Connect the USB (B) connector on the back side of the
panel.
2/ Connect the USB (A) connector to one of your
computer’s USB ports. Windows will automatically
detect the new game device.
3/ The drivers are installed automatically.
4/ Click Start/Settings/Control Panel and then double-
click Game Controllers. The Game Controllers dialog
box display the joystick name "G-FORCE SP-35" with
OK status.
5/ In the Control Panel, click Properties to configure
your joystick. Test device: Lets you test and view all of
your panel functions.
Now you are ready to play!
In the basic setting, the slider
function is disabled. SP-35
In the configuration software
FreeJoy QT, all functions of the
controllers are fully programmable
according to the user's needs.
With control panel SP-35 you can
control 31 Buttons + PoV Up /
Down / Right / Left, overall 35
joystick buttons.