Gama Sonic IMPERIAL BULB User manual

IMPERIAL BULB
SOLAR LAMP
Model: 97B012
Version 1.2
US Patent #9458970 #7172307 Design Patent #629,950
Instruction Manual
Eagle finial
Acorn finial

For optimum light duration throughout
the night, it is very important to mount
your solar lamp post in a spot where it
will receive the maximum amount of
sunlight throughout the day.
page 2
Thank you for your purchase. GAMA SONIC® solar charged lights are brighter and last all night with a full day solar charge.
Unique designs, superior light output, and numerous installation options confirm the outstanding value of our product.
For technical assistance and more information call our Toll-Free number:
800-835-4113 (only within the US)
Or
visit our website or download the latest version of your instruction manual:
www.gamasonic.com Or www.gamasonic.com/user-guides
Please read the instruction manual carefully to obtain the best results from your purchase.
What's inside
Top
GS LED Bulb
Finials
Fixture
Note: The solar light
must be charged for
two sunny days in
the “ON” position for
best results.
WARNING: GAMA SONIC® Light
bulbs are built and designed for
Gama Sonic products only. They
are not designed to be used in
other electrical sockets.
For the same reason, regular AC
and/or Low Voltage bulbs cannot
be used in Gama Sonic products.
will receive the maximum amount of
sunlight throughout the day.
Note: The solar light
must be charged for
two sunny days in
the “ON” position for
WARNING: GAMA SONIC® Light
bulbs are built and designed for
Gama Sonic products only. They
are not designed to be used in
other electrical sockets.
For the same reason, regular AC
and/or Low Voltage bulbs cannot
be used in Gama Sonic products.

page 3
Assembly Instructions Replacing the
Solar LED Bulb
3"
page 3
3"
1. Detach the upper part of the
lamp as shown in (Fig. 1) by
turning it counterclockwise.
2. Install the solar LED bulb
(Fig. 5). Turn ON the operation
switch (see Fig. 2.) by choosing
your desired brightness level:
LOW - last longer using dimmer
light.
HIGH- Brighter light output.
3. Reassemble the upper part of
the lamp by placing it on top of
the 4 hinges, and then turn it
clockwise.
4. Install the lamp onto your
existing 3” post, using the
screws provided (Fig. 3.).
5. Screw in the Acorn or Eagle Finial
on top of the lamp (Fig. 4).
The Solar LED Bulb is designed to last up
to 10 years, however if it is not working,
or if you want to use a different color
temperature bulb, you can replace it with
a new GAMA SONIC Solar LED Bulb.
1. Detach the upper part of the
lamp as shown in Fig. 1 by
turning it counterclockwise.
2. Make sure the operation
switch is in the OFF (“O”)
position.
3. Remove the existing bulb by
turning it counterclockwise
Fig 5.
4. Install the new GS Solar LED
Bulb by turning into the
bulb socket clockwise.
5. Reassemble the unit
by reversing the above
procedure
NOTE: When installing the GS
Solar LED Bulb, hold it from its
silver base not by the glass .
Fig. 1
Fig. 5
Operation Switch
Fig. 2
Fig. 4
Fig. 3
Fig. 5

page4
ReplacingtheBatteries
Replacement batteries are available
at www.gamasonic.com or via our Toll free number: [phone]
(After approx. 3 years of use, the batteries may need replacing).
1. Detach the upper part of the lamp as shown in Fig. 1 by
turning it counterclockwise.
2. Make sure the operation switch is in the OFF (“O”)
position.
3. Release the battery compartment cover located on the
silver reflector by removing the screw. Remove the
battery and unclip the connector.
4. Make sure the new batteries are high quality – Li-Ion
Battery Pack (3.2 Volt / 3000mAh) (Fig. 6). This lamp
uses two of these batteries.
5. Clip the wires from the new batteries to the wires
from the lamp and install the batteries into the battery
compartment.
6. Secure the battery compartment covers and reassemble
the unit by reversing the above procedure.
Fig. 6
1. Detach the upper part of the lamp as shown in Fig. 1 by
2. Make sure the operation switch is in the OFF (“O”)
3. Release the battery compartment cover located on the
silver reflector by removing the screw. Remove the
4. Make sure the new batteries are high quality – Li-Ion
Battery Pack (3.2 Volt / 3000mAh) (Fig. 6). This lamp
from the lamp and install the batteries into the battery
6. Secure the battery compartment covers and reassemble
Fig. 6
Maintenance
Clean the solar module regularly with a damp towel to guarantee optimum
performance of the solar panel. Do not use any type of solvent for cleaning and
be careful not to put too much pressure on the module while cleaning.
Trouble Shooting
If your solar charged light does not come on at dusk despite
observance of all the instructions, please try the following steps:
1. Make sure that the solar light is not being affected by any other light source.
2. Ensure the solar light is not positioned in the shade during the day.
3. Make sure the switch in the lamp head is in the” ON” position.
4. Check that the batteries are installed correctly.
NOTE: The performance of the solar light will vary with the time of year. It will
deliver longer duration when it has had a full day in the sun rather than a day in
overcast weather.
WINTERTIME TIPS: For optimal performance, be sure
to remove any snow or debris accumulation from solar
panel(s). A solar panel free of debris will charge the
batteries much more efficiently.
WARNING: Please keep out of reach of children.
WARNING: Do not dispose of Li-Ion battery
in the regular trash, municipal waste stream
or by fire as batteries may leak or explode.
Do not open, short circuit, or mutilate
batteries as injury may occur. Preserve
our environment by recycling batteries or
disposing of them in accordance with local,
State and federal regulations. Do not mix old
and new batteries.