Ganz PixelMASTER GXi Series User manual

Installation [Front]
①
Remote IR
②
State LED
③
Mouse / USB
[Rear]
①
PoE Adaptor
②
Full-HD
Intelligent IP
Camera
③
Hub
④
Router
⑤
e-SATA
⑥
Analog monitor
⑦
Microphone
⑧
Speaker
⑨
VGA monitor
⑩
Digital
monitor
PixelMASTER GXi Series
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
①
②
③
①
②
③
①
②
③
⑥
④
⑦
⑧
⑨
⑩
⑪
⑬

⑪
Sensor input
⑫
Relay / RS-
485
⑬
DC Adaptor
Camera Connection
Initial Setup
-Auto(using the PoE Port) Mode-
To two ways to connect to NVR camera.
Case 1. As shown above, can be connected to PoE ports. (up
to 8ch)
Without a separate set of cameras can operate in NVR.
Automatically to connect the network video recorder after
setting the IP address.
For further information, please refer to the manual.
-Manual(Using the local or ethernet ports) Mode-
Case 2. As shown above, it the camera and the recorder
when is connected to the same hub is to connect.
Separate camera settings are required.
From 9 to 16 channel is used to connect.
For further information, please refer to the manual.
-START SETUP-
When you turn on at first time you can see the below menu.
SYSTEM LANGUAGE: Select the system language.
SYSTEM TIMEZONE: Select the system time-zone.
DATE FORMAT: Select the date format
VIDEO SIGNAL FORMAT: Select the video signal type
VIDEO OUTPUT RESOLUTION: Select the video output
resolution

Start
Toolbox
Current date, Time, user ID
Network connection
Backup device
Auto Sequence
HDD Location
Audio Channel
Log Off
Main Menu
VA Menu
Copy
Search/Copy
Display/Sequence
PTZ
D-Zoom
Log List
Live Screen
Search/Copy
-Log in-
Once log in window display as the right side, fill in ID,
password then click confirm button.
If auto log in was selected already, log in window is
not displayed.
Factory default ID is ADMIN, Password is 1234
-Operation-
-Left Click: select screen where mouse cursor located
-Right: Active Pop-up Menu
-Double click: if you double click certain screen, it will be
full screen.
-Drag: On full screen, Press left button of mouse and drag,
you can see zoomed screen.

-Note-
Yellow Box: follow the instructions to perform search and playback.
Purple: follow the instructions to perform copy
①Select Search
Condition
②Recorded
Date (Blue
Marked)
③Select Date
for Search
④Playback
Hour Select
⑤Playback
Minute Select
⑥Second
Select
①Copy start: select start
time with mouse left click in
the minute select bar, click
right button of mouse and
select to start or end time
②File name for
copy
③Select channel
for copy
④Copy/Start
Control the Play
mode
Playback time/
Camera title
Exit

Camera Connection
Configuration of the Network
Web Viewer
-Operation-
Using Internet explorer, connect web-server including on
recorder as below. Web viewer is operated by Active-x
from Microsoft.
If you want other web browser besides Microsoft,
refer to user manual and extra set up is required.
-Connection of the IP Camera-
-In the below flow order as appropriate for your
environment can connect the IP Camera
-Network setup with automatic ip setup-
- As per below direction, select “ON”for Automatic IP
address.

Mobile Viewer
[Download Smart phone application using Android OS]
[Download Smart phone application using iOS from Apple]
-Download-
Execute Android market play store, application
“PoketViewer”can be downloaded and be
installed.
-Download-
Over App store, “iPocketViewer”can be
downloaded and be installed.