GAPOSA Roll app User manual

www.AVOutlet.com
13
15
14
16
Control up to 32
different Gaposa
motorized products
from the App from
anywhere you are.
QUICK GUIDE
Technical details
The app will find
your location and
auto fill your details.
Please confirm this
is all correct.
Scan the QR code
or enter the serial
number.
Click Register Now
-The app will ask to
use the camera to
take a picture of the
QR code
Once you have cre-
ated your account,
please sign in using
the credentials you
just created.
The app is now
setup and you can
begin to add rooms
and shades.
Before installing RollApp, read this installation and the safety instruction carefully. The installation and implementation of this product must be carried
out by a motorization and home automation professional, in accordance with the GAPOSA instructions and the regulations applicable in the country of
commissioning.
The installer must inform his customers of the conditions of use and maintenance of the product. Any use outside the scope of application defined by
GAPOSA is prohibited. As with any breach of the instructions in this manual, it would result in the exclusion of liability and warranty claims under GA-
POSA. Before installation, check the compatibility of this product with the associated equipment and accessories. Please read these warnings carefully,
they supplement the product manuals before using RollApp home automation solutions. Please also notify all other RollApp users of the following.
GAPOSA cannot be held responsible for any harmful consequences that could occur if the user has not taken into account the instructions given in the
product manual, in the safety instructions and warnings below. For information, advice and complaints regarding the use of RollApp home automation
solutions, please contact a GAPOSA representative (www.gaposa.com) or refer to the applicable sales literature.
GAPOSA Srl has developed RollApp to control GAPOSA radio products, including motors for shutters and blinds as well as receivers and sensors of the
same brand. The control of garage doors and gates is not recommended and therefore excluded from RollApp.
When configuring or using a home automation system, users must take into account the environment of the home as well as each specific equipment or
any particular situation relative to each of the residents. Users must take additional precautions when remotely configuring connected equipment or when
its operation is likely to affect children, persons with reduced mobility or animals. Users must use the GAPOSA home automation services in their area of
use (see applicable sales documentation) and set up the operating scenarios correctly so that they do not create any risk for the residents of the house.
The functioning of GAPOSA home automation solutions must be tested periodically by the main user. The latter must regularly check the various connec-
tions and operating scenarios. GAPOSA recommends that the connected equipment and its settings be subject to preventive maintenance and regularly
checked by a home automation professional, at the initiative of the Primary User.
Hub Input Voltage 5V
Hub Input Power 0.3 A Max.
Frequency 434.15 MHz
Connection Wi-Fi
Wi-Fi network 2.4 GHz only
Range 30 mt / 98 feet
Protection Rate IP20
Operation Temperature 0°C to 60°C / 32°F to 140°F
IOT Integration works with Amazon Alexa and Google Assistant
en
GAPOSA srl
via Ete, 90 - 63900 Fermo - Italy
T. +39.0734.220701 - F. +39.0734.226389
inf[email protected]om - www.gaposa.com
GAPOSA Inc.
3920 Providence Road
Newtown Square PA 19073
Ph. 610 325 3697
inf[email protected]om

www.AVOutlet.com
1
Download the free Gaposa RollApp app via the
Google Play or Apple Store.
2
Open your Wi-Fi
settings and con-
nect to the network
GAPOSA-xxxx
(ex: GAPOSA-c045)
Plug the hub into an outlet within range of your
Wi-Fi network and Gaposa powered shades.
The Hub only works with 2.4GHz signals.
Temporarily disabled 5Ghz signals and any
additional access points.
3 4
Enter password
to connect (Case
sensitive):
GaposaInit
You will be taken
to the network
sign-in page, if not,
you must sign into
the network from
settings. Click the
menu button at
the top right if on a
mobile phone.

www.AVOutlet.com
5 6
Click Configure new
Wifi
A list of visible WiFi
networks appears.
Please select your
home WiFi network.
7 8
Enter your WiFi
network password
and click Apply
Exit out of the hub
sign in page and
reconnect to your
home WiFi if it
doesn’t connect
automatically.

www.AVOutlet.com
9 10
Download the app
from the app store.
Search RollApp
Open the app and
create an account
by clicking Add New
Account
The app will ask for
location permis-
sions. Please allow
location use for
sunset / sunrise
control.
11 12
Fill out the form
with your desired
account informa-
tion.
Read the privacy
policy and accept to
continue.

www.AVOutlet.com
13 14
The app will find
your location and
auto fill your details.
Please confirm this
is all correct.
Once you have cre-
ated your account,
please sign in using
the credentials you
just created.
15 16
Scan the QR code
or enter the serial
number.
Click Register Now
-The app will ask to
use the camera to
take a picture of the
QR code
The app is now
setup and you can
begin to add rooms
and shades.

www.AVOutlet.com
13
15
14
16
Control up to 32
different Gaposa
motorized products
from the App from
anywhere you are.
QUICK GUIDE
Technical details
The app will find
your location and
auto fill your details.
Please confirm this
is all correct.
Scan the QR code
or enter the serial
number.
Click Register Now
-The app will ask to
use the camera to
take a picture of the
QR code
Once you have cre-
ated your account,
please sign in using
the credentials you
just created.
The app is now
setup and you can
begin to add rooms
and shades.
Hub Input Voltage 5V
Hub Input Power 0.3 A Max.
Frequency 434.15 MHz
Connection Wi-Fi
Wi-Fi network 2.4 GHz only
Range 30 mt / 98 feet
Protection Rate IP20
Operation Temperature 0°C to 60°C / 32°F to 140°F
IOT Integration works with Amazon Alexa and Google Assistant
en
GAPOSA srl
via Ete, 90 - 63900 Fermo - Italy
T. +39.0734.220701 - F. +39.0734.226389
[email protected] - www.gaposa.com
GAPOSA Inc.
3920 Providence Road
Newtown Square PA 19073
Ph. 610 325 3697
[email protected]
checked by a home automation professional, at the initiative of the Primary User.
tions and operating scenarios. GAPOSA recommends that the connected equipment and its settings be subject to preventive maintenance and regularly
The functioning of GAPOSA home automation solutions must be tested periodically by the main user. The latter must regularly check the various connec-
use (see applicable sales documentation) and set up the operating scenarios correctly so that they do not create any risk for the residents of the house.
its operation is likely to affect children, persons with reduced mobility or animals. Users must use the GAPOSA home automation services in their area of
any particular situation relative to each of the residents. Users must take additional precautions when remotely configuring connected equipment or when
When configuring or using a home automation system, users must take into account the environment of the home as well as each specific equipment or
same brand. The control of garage doors and gates is not recommended and therefore excluded from RollApp.
GAPOSA Srl has developed RollApp to control GAPOSA radio products, including motors for shutters and blinds as well as receivers and sensors of the
solutions, please contact a GAPOSA representative (www.gaposa.com) or refer to the applicable sales literature.
product manual, in the safety instructions and warnings below. For information, advice and complaints regarding the use of RollApp home automation
GAPOSA cannot be held responsible for any harmful consequences that could occur if the user has not taken into account the instructions given in the
they supplement the product manuals before using RollApp home automation solutions. Please also notify all other RollApp users of the following.
POSA. Before installation, check the compatibility of this product with the associated equipment and accessories. Please read these warnings carefully,
GAPOSA is prohibited. As with any breach of the instructions in this manual, it would result in the exclusion of liability and warranty claims under GA-
The installer must inform his customers of the conditions of use and maintenance of the product. Any use outside the scope of application defined by
commissioning.
out by a motorization and home automation professional, in accordance with the GAPOSA instructions and the regulations applicable in the country of
Before installing RollApp, read this installation and the safety instruction carefully. The installation and implementation of this product must be carried
LED Status
Blue Blinking - Not Connected to Wifi
Blue Solid - Connected to Wifi
Red Blinking - Transmitting RF Signal