Garden Treasures Living SS-909E-1N User manual

ITEM #0206016
MODEL #SS-909E-1N
2 PERSON STEEL SLING SWING
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday - Friday.

PACKAGE CONTENTS
Part
A
B
C
D
E
F
G
H
I
J
K
L
M
N
Description Quantity
1
1
1
1
1
1
1
2
2
2
2
2
2
2
top frame bar
front leg
back leg
leg crossbar
right arm
left arm
sling seat
sling back
canopy side bar
canopy
short hanging bar
long hanging bar
magazine bag
back crossbar
L
F
A
I
M
J
K
LL
C
D
H
N
E
B
G

HARDWARE CONTENTS
Part Description Quantity Picture (Shown to size)
M6 x 40 L bolt
M6 x 45 L bolt
M6 x 55 L bolt
M6 x 70 L bolt
M8 x 45 L bolt
M8 x 95 L bolt
M8 nut
M6 nut
M6 washer
M8 washer
plastic washer
black knob
“S” hook
M6 bolt cap
M8 bolt cap
M6 nut cap
M8 nut cap
4
4
4
4
4
4
4
4
4
12 + 1 spare
12 + 1 spare
16 + 1 spare
16 + 2 spares
12 + 1 spare
8 + 1 spare
2
2
AA
BB
CC
DD
EE
FF
GG
HH
II
JJ
KK
LL
MM
NN
OO
PP
QQ

1) Align the two holes at the top of one Front
Leg (B) with the two holes at one end of the
Top Frame Bar (A). Insert an M8 x 95 L Bolt
(FF) through an M8 Washer (JJ), through a
leg hole and through (A). Align a Back Leg
(C) on the other side of the top frame bar
and continue the bolt through (C), through
another (JJ) and an M8 Nut (HH). Do not
tighten completely. Repeat this procedure
for the adjacent hole, and to attach the
other two legs at the other end of (A).
See Fig. 1.
2) Align the holes of a Leg Crossbar (E) with
the holes on the front and back legs at one
end of the frame. From the outside, insert
an M6 x 55 L Bolt (CC) through (E), through
a Plastic Washer (KK), through the leg,
through an M6 Metal Washer (II) and into
an M6 Nut (GG). Do not tighten completely.
Repeat this procedure for all four
crossbar-to-leg connections. See Fig. 2.
3) Align the holes of the Back Crossbar (D) with
the holes in the two (C). For each hole, insert
an M6 x 70 L Bolt (DD) through (C), through
the back crossbar (D), through an M6 Metal
Washer (II), and into (GG). Do not tighten
completely. See Fig. 3.
Fig. 1
Fig. 2
Fig. 3
FRAME ASSEMBLY
M6 x 55 L bolt
Assemble your swing on a soft, non-abrasive surface, such as carpeting, to avoid damage. The
swing is heavy. Handle with care. Two adults may need to assemble. Caution: Recommended
maximum sitting weight for the swing is 400 lbs.
SAFETY INFORMATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble the
product. Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly: two Allen wrenches, open hex wrench and touch up paint (provided)
PREPARATION
ASSEMBLY INSTRUCTIONS
DescriptionPart Quantity Picture
Hardware Used
OO FF JJ JJ HH
QQ
BE
NN CC
PP
GG
II
KK
NN
II
DD GG
PP
D
A
C
CC
DD M6 x 70 L bolt
FF M8 x 95 L bolt
GG M6 nut
HH M8 nut
II M6 metal washer
JJ M8 metal washer
KK 6mm plastic washer
NN M6 bolt cap
OO M8 bolt cap
PP M6 nut cap
QQ M8 nut cap
x 4
x 4
x 4
x 4
x 4
x 4
x 8
x 8
x 8
x 8
x 8
x 4

M6 x 45 L bolt
M6 nut
M6 washer
“S” hook
M6 bolt cap
M6 nut cap
M6 x 40L bolt
M8 x 45L bolt
M6 washer
M8 washer
M6 bolt cap
4) Align the two holes in the bottom of the
Left Arm (G) with the two holes in the
left side of the Sling Seat (H). For each hole,
insert an M8 x 45 L Bolt (EE) through an M8
Metal Washer (JJ), through the arm and
into the sling seat crossbar. Do not tighten
completely. Repeat this procedure on the
other side of the sling seat using the
Right Arm (F). See Fig. 4.
5) Place the Sling Back (I) between (F & G),
lining up the holes on the sides. For each
hole, insert an M6 x 40 L Bolt (AA) through
an M6 Metal Washer (II), through back of
the arm and into (I). Do not tighten completely.
Repeat this procedure on the other side of the
sling back to attach the other arm. See Fig. 5.
6) Align the hole at one end of a Short
Hanging Bar (L) with the sleeve under
the front of the arm. From the inside,
insert an M6 x 45 L Bolt (BB) through the
sleeve, through the short hanging bar,
through an M6 Washer (II) and into an
M6 Nut (GG). Do not tighten completely.
Attach the Long Hanging Bar (M) to the
back of the arm using the same procedure.
Attach remaining two hanging bars to the
other arm in the same way. See Fig. 6.
7) At each end of the seat assembly, bring
the holes in the free ends of the hanging
bars together and thread them onto an
“S” Hook (MM). Hang the “S” hooks and
seat assembly from the loops on the top
frame bar. See Fig. 7.
Fig. 6
SEAT ASSEMBLY
HANGER ASSEMBLY Fig. 7
DescriptionPart Quantity Picture
Hardware Used
M8 bolt cap
DescriptionPart Quantity Picture
Hardware Used
OO
EE
JJ
OO EE
JJ
NN
AA
II
NN
AA
II
F
H
I
G
Fig. 4
Fig. 5
AA
EE
II
JJ
NN
II
PP GG II
BB NN
I
L
M
MM
MM
NN
BB
II
GG
PP
OO
x 4
x 4
x 4
x 4
x 4
x 4
x 4
x 4
x 4
x 2
x 4
x 4

8) Use a Black Knob (LL) to attach a
Canopy Side Bar (J) to each end of
the top frame bar. The fluted circles
on the canopy bars should face the
fluted circles on the top frame bar.
See Fig. 8.
9) Place one end of the Canopy (K) over one
of the canopy side bars, fitting the corner
pockets over the ends of the canopy side
bar. Remove the black knob and reinsert
it through the grommet hole in the canopy.
Secure the canopy to the bar with the
hook-and-loop straps. Stretch the Canopy
(K) over the top of the swing and repeat
procedure on other Canopy Side Bar (J).
You can change the tilt of the
canopy by adjusting the black knobs.
See Fig. 9.
10) Now go back and securely tighten all nuts
and bolts using hex and Allen wrenches.
Place Nut Caps (PP, QQ) over all nuts,
and place Bolt Caps (NN, OO) over all bolts.
Fig. 8
Fig. 9
black knob 2
CANOPY ASSEMBLY
DescriptionPart Quantity Picture
Hardware Used
x
LL
J
LL
J
K

11) Hang the Magazine Bags (N) on the
outsides of the arms, securing with
the hook-and-loop straps. See Fig. 10.
Your swing is now ready to use.
Fig. 10
ONE-YEAR LIMITED WARRANTY
７
Wash with mild soap, rinse with water and let air dry.
CARE AND MAINTENANCE
This warranty is extended to the original purchaser and applies to defects in materials and
workmanship of your patio furniture provided your furniture is maintained with care and used only
for personal, residential purposes.
Frames are warranted to be free from defects in material or workmanship for a period of one (1)
year.
Exclusions: Items used for commercial, contract or other non-residential purposes; display
models; items purchased “as is;” or items damaged due to acts of nature, vandalism, misuse or
improper assembly are not covered.
If within the stated warranty period a product is found to be defective in material or workmanship,
the purchaser must contact the manufacturer’s customer service department at 1-800-643-0067.
The manufacturer, at its option, will repair or replace the defective parts.
Cushions, Straps and/or Wicker Weaves are covered for a period of one (1) year against
defects in material or workmanship. Sling fabric is covered for a period of one (1) year against
defects in material or workmanship.
Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items
will be in the original style and color or a similar style and color if the original is unavailable or has
been discontinued. As some states do not allow exclusions or limitations on an implied warranty,
the above exclusions and limitations may not apply. This warranty gives you specific rights, and
you may also have other rights which vary from state to state.
Printed in China
N
N