Gardenline GLTH680 Instruction Manual

GLHT 680; EX; UK
Electric Hedge Trimmer Artikel-Nr.: 3403712 Ident-Nr.: 01017

Komponenten / Ersatzteile
Position Artikel-Nr. Beschreibung
1 340371001001 Blade Guard
6 340371001006 Lower Blade
7 340371001007 Upper Blade
14 340371001014 Screw M5 x 16
15 340371001015 Safety Cover
24 340371001024 Carbon Brush Assy.(pair)
27 340371001027 rotor
35 340371001035 Driven Gear
37 340371001037 Eccentricity Bottom Board
42 340371001042 Hex screw
54 340371001054 Micro-Switch
57 340371001057 Front Handle Press Button
61 340371001061 Front Handle Bracket
63 340371001063 Long Soft shaft Spring

GLHT680ELECTRIC
HEDGE TRIMMER
THE
POWER
GUIDE
680W ELECTRIC HEDGE TRIMMER
0044 (0) 151 6491500
1890 946244
7781
:REBMUN
L
EDOM
Now you have purchased a Gardenline®
product you can rest assured in the
knowledge that as well as your 3 year
parts and labour warranty you have the
added peace of mind of dedicated
helplines and web support
0151 6491500
1890 946244
6452
:
REBMUNLEDOM
MONTH ON SALE: 05/2008 36
THIS BOX INCLUDES:
• 1 x HEDGE TRIMMER
50cm
CUTTING
LENGTH
STOP
< 1sec
20mm
+90˚-90˚
GLHT680 User Guide Artwork.qxd 11/1/08 11:12 am Page 2

03 Introduction
04 General Information & Safety Instructions
10 Assembly and Parts List
12 Getting Started
14 Features
15 Instructions
19 Other Useful Information
21 Warranty Card
Packaging
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material and
can therefore be reused or can be returned to the raw
material system.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 6452
02
Contents
GLHT680 User Guide Artwork.qxd 11/1/08 11:12 am Page 3

Introduction 1
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 6452 03
Congratulations on choosing to buy a Gardenline®
product. By doing so you now have the assurance
and peace of mind that comes with purchasing a
product made by one of Europe’s leading
manufacturers.
All products brought to you by Gardenline®
are manufactured to the highest standards
of performance and safety, and, as part of our
philosophy of customer service and satisfaction,
are backed by our comprehensive 3 Year Warranty.
Great care has gone into the manufacture of this
product and it should therefore provide you with
years of good service when used properly. In the
event of product failure within its intended use
over the course of the first 3 years after date of
purchase, we will remedy the problem as fast
as possible once it has been brought to our
attention. In the unlikely event of such an
occurrence, or if you require any information
about the product, please contact us via our
helpline support services, details of which are
to be found both in this manual and on the
product itself.
Please fill in and return the Warranty Card to the
address provided.
We hope you will enjoy using your purchase for
many years to come.
GLHT680 User Guide Artwork.qxd 11/1/08 11:12 am Page 4

Caution! When using electric tools it is
imperative to take the following basic
safety precautions in order to reduce the
risk of electric shock, injury and fire. Read
and take note of these instructions before
you use this tool.
General safety instructions
1 Keep your work area tidy
An untidy work area invites accidents.
2 Check the working conditions
Do not expose electric tools to rain. Never use
electric tools in damp or wet locations. Make sure
there is good lighting. Do not use electric tools near
flammable liquids or gases.
3 Guard against electric shock
Avoid body contact with earthed components
such as pipes, radiators, cookers, refrigerators.
4 Keep children away!
Do not allow other persons to touch the tool or
cable. Keep all persons out of your work area.
5 Store tools in a safe place
When tools are not in use they should be stored
in a dry, locked room out of children’s reach.
6 Do not overload your tools
Tools work better and safer when used within their
quoted capacity range.
7 Use the right tool
Never use tools or attachments with insufficient
power for the job in hand. Never use tools on jobs
for which they were not intended.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 6452
04
Safety Instructions 2
GLHT680 User Guide Artwork.qxd 11/1/08 11:12 am Page 5

8 Wear suitable work clothes
Do not wear loose clothing or jewelry as they may
get caught in moving parts. Rubber gloves and
non-slip shoes are recommended when working
outdoors. Wear a hair net if you have long hair.
9 Wear safety goggles
and use a dust mask when working on dusty jobs.
10 Do not mis-use the cable
Do not carry the tool by its cable or pull on the
cable to remove the plug from the socket-outlet.
Protect the cable from heat, oil and sharp edges.
11 Don’t overreach
Avoid abnormal working postures. Make sure you
stand squarely and keep your balance at all times.
12 Look after your tools
Keep your tools sharp and clean for better
and safer performance. Follow the instructions
for maintenance work and for changing any
attachments. Check the plug and cable
regularly and, if damaged, have them replaced
by an authorized specialist. Check the extension
cable regularly and replace it if damaged. Keep
handles dry and free from oil and grease.
13 Always pull out the power plug
when the tool is not being used, before carrying
out any maintenance work and when changing
attachments such as blades, bits and cutters of
any kind.
14 Remove adjusting keys and wrenches
Make sure that all keys and adjusting wrenches are
removed from the tool before switching it on.
15 Avoid unintentional starting
Never carry a tool with your finger on the switch
if it is connected to the power supply. Make sure
that the switch is in OFF position when inserting
the power plug.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 6452 05
GLHT680 User Guide Artwork.qxd 11/1/08 11:12 am Page 6

16 When using an extension cable outdoors
check that it is approved for outdoor duty and
is marked accordingly.
17 Be alert at all times
Watch what you are doing. Use common sense.
Do not operate the tool if your mind is not on
your work.
18 Check the tool for damage
Each time before re-using the tool, carefully check
that the guards or any slightly damaged parts are
working as intended. Check that the moving parts
are in good working order, that they do not jam,
and that no parts are damaged. Make sure that
all parts are fitted correctly and that all other
operating conditions are properly fulfilled. Unless
otherwise stated in the operating instructions,
damaged guards and parts have to be repaired
or replaced by an authorized service center. It is
imperative to have damaged switches repaired
by an authorized service center. Never use any
tool if its switch cannot be turned off and on.
19 Important!
For your own safety, use only accessories and
attachments which are listed in the operating
instructions or recommended or listed by the tool
manufacturer. The use of any accessory or
attachment other than those recommended in the
operating instructions or catalogue may involve a
risk of injury for you personally.
20
Have repairs carried out only by a qualified electrician
This electric tool complies with the pertinent
safety regulations. Repairs are to be carried out
only by a qualified electrician or the user may
suffer an accident.
21 Replacing the power cable
To prevent injury, damaged power cables may only
be replaced by the manufacturer or the customer
service center.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 6452
06
GLHT680 User Guide Artwork.qxd 11/1/08 11:12 am Page 7

Keep these safety instructions in a safe place.
Specific safety information
Please read this safety information and the directions
for use carefully and be sure to follow the instructions
to the letter.
1 Always remove the power plug from the socket
outlet before you perform any work on the hedge
trimmer, e.g.
•repairing a damaged cable
•cleaning the blades
•troubleshooting
•cleaning and maintenance or before leaving
the tool unattended.
2 The hedge trimmer can cause serious injuries!
Read the directions for use carefully in order to
acquaint yourself with the correct way to handle,
set up, service, start and put down the machine.
Familiarize yourself with all the machine’s control
elements and its proper use.
3 Always handle the hedge trimmer with both hands.
4 When working with the hedge trimmer, wear sturdy
shoes and make sure of your footing.
5 Never work with the hedge trimmer in the rain or
on wet hedges and never leave the hedge trimmer
outdoors. The hedge trimmer must not be used
if it is wet.
6 We recommend that you wear safety goggles
and ear defenders when working with the
hedge trimmer.
7 Wear suitable working clothes such as rubber
gloves and non-slip shoes. Do not wear loose
garments. Keep long hair in a hair net.
8 Avoid abnormal postures and make sure of your
footing, particularly when working on ladders
and steps.
9 Avoid over-reaching when using this product,
particularly when working at height.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 6452 07
GLHT680 User Guide Artwork.qxd 11/1/08 11:12 am Page 8

10 Be sure to hold the hedge trimmer well away from
your body when it is switched on.
11 Make sure there are no other persons or animals
within your working area (radius of swing).
12 Carry the hedge trimmer only by its guide handle.
13 Keep cables clear of where you are cutting.
14 Before you use the hedge trimmer, examine the
power cable for signs of damage and aging.
15 Use the hedge trimmer only when the power cable
is in good working order.
16 Do not remove the power plug from the socket
outlet by pulling on the cable. Never carry the tool
by its cable. Take care not to damage the cable in
any way.
17 Protect cables from heat, caustic fluids and sharp
edges. Replace damaged cables immediately.
18 Examine the cutting system regularly for signs of
damage and, if necessary, arrange for the hedge
trimmer to be professionally repaired by the ISC
Customer Service Center or a specialist workshop.
19 If the blades become jammed, e.g. due to thick
branches or the like, switch off and unplug the
hedge trimmer immediately. Only then are you to
remove the cause of the obstruction.
20 Keep the hedge trimmer in a dry place out of
children’s reach.
21 During transportation and storage of the hedge
trimmer, keep the blades covered at all times with
the special guard.
22 Take care not to overload the hedge trimmer and
do not use it on jobs for which it is not intended,
i.e. you are allowed to use the hedge trimmer only
to cut hedges, shrubs and perennials.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 6452
08
GLHT680 User Guide Artwork.qxd 11/1/08 11:12 am Page 9