GARDINER TECHNOLOGY Gardtec 500 series User manual

Gardiner Technology
Gardtec 500 Series User Manual
Operating Gardtec 500
To alleviate any possibility of error , always insert 0 (zero) in front of a user code entry.
0 (zero) should not be used as part of a user code.
Function Action Result Display
To Set System
Enter User Code Exit sounder commences
continuous tone during exit
time
1
st
2
nd
To Unset System
a) Enter premises via entry
route
b) Enter User Code
Entry sounder starts
intermittant tone
Entry sounder s ilences
-
U
Isolating Zones
(ie night set or garage set)
NB :- After u nsetting the
system after zone omits
the display will identify the
zones omitted during the
last setting
Enter User Code followed
by *
and zone number .
(for multiple zone omits
enter code - * zone no *
zone no etc)
Exit sound starts
continuous tone for
duration of exit time 1
st
2
nd
Changing the User Code
NB: - R emember not to use
a 0 (zero) as part of a code
a) Enter the user code
b) Enter *9 followed by the
new code
c) Press 0 (zero) to clear
display
a) Exit sounder starts
b) Sounder silences and
display shows the new
code in sequence followed
by U
c) Panel returns to unset
U
?
?
?
?
U
U
Chime Function
(for walk testing detector s
or identifying area
movement)
To remove chime function
press 0 (zero)
Enter 0 # 6
Movement through any
detector while system is
unset creates a 2 second
tone
U
Sounder Test
Enter 0 # 9 External sounder & strobe
will sound for 10 seconds
follwed by internal sounder
for 10 seconds
U
To Read Event Log
(last 13 events)
Enter 0 # 8
Display will scroll through
last 13 even ts of activation 1
2 3 4 5 - - - - 13
?
?
?
?
To Clear Display
If the display scrolls
between U (unset) and any
zone information press 0
(zero) to clear after
investigating cause of
activation)
U
Quick Set Option
Enter 0 # 4
Normal set procedure
MCM Alarms – The Old Dairy – 77 Robinson Road – Rushden – Northamptonshire – NN1 0 0EH
Tel:
-
0870 749 0263
–
Fax:
-
0870 749 0264
–
Email
[email protected]
–
Web:
-
www.mcmalarms.co.uk
U
-
h
-