Garmin GPSMAP 7012 User manual

Printing a Mounting Template
NOTICE
These instructions for printing a mounting template must be followed precisely. Failure to do so may result in incorrect dimensions on the
template and an incorrect cutout (too large or too small) on the mounting surface of your boat.
To print the attached mounting template, check the dimensions of the template and select the appropriate size of paper. Both the length and
width measurements are indicated on the template.
The paper size must be larger than the dimensions of the template. Select the paper size using the Properties button in the Adobe Acrobat print
dialog box.
Select Auto-Rotate and Center to ensure the template prints in the correct orientation.
IMPORTANT: When printing the ush mount template, set Page Scaling in the Adobe Acrobat print dialog box to None.
Page Scaling:
Select None:
Auto-Rotate and Center:
Select with a check mark
for correct orientation
Properties: Select
the paper size.
Paper size (example):
Use appropriate size paper.
NOTICE
After printing and before cutting the mounting surface, measure the printed template to ensure both the length and the width printed at the
correct size and to ensure that the dimensions of the printed template match the actual size of your mount. Garmin is not responsible for any
damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.

November 2009 190-01120-07 Rev. A Printed in Taiwan
Unit Dimensions: 13
9
/
32
in. (336.8 mm) W × 9
7
/
8
in. (251.5 mm) H
Dimensions de l’appareil : 336,8 mm × 251,5 mm (L × H)
Dimensioni unità: L 336,8 mm × A 251,5 mm
Geräteabmessungen: Breite 336,8 mm × Höhe 251,5 mm
Dimensiones de la unidad: 336,8 mm ancho × 251,5 mm alto
Enhetsmått: 336,8 mm B × 251,5 mm H
Enhedens mål: 336,8 mm B × 251,5 mm H
Mål på enheten: 336,8 mm B × 251,5 mm H
GPSMAP®7012, 7212
Flush Mount Template
5
/
8
in.
(9.5 mm)
9
/
64
in.
(3.5 mm)
9
/
32
in.
(7.2 mm)
1/2 in.
13 mm
12 35/64 in. (318.6 mm)
9 19/64 in.
(236.2 mm)
10 31/32 in. (278.5 mm)
5 7/8 in.
(149 mm)
Dimensões da Unidade: 336,8 mm L × 251,5 mm A
Recommended clearance for sun cover handle
Espace de sécurité recommandé pour manipuler le pare-soleil
Spazio libero consigliato per la maniglia della copertura di
protezione dai raggi solari
Empfohlener Abstand für Griff des Sonnenschutzes
Se recomienda despejar el mango de la cubierta para el sol
Folga recomendada para a pega da cobertura solar
Rekommenderat utrymme för solskyddshandtag
Anbefalet plads til soldækslets håndtag
Anbefalt klaring for håndtaket på soldekselet