Garmin STRIKER CAST Instruction manual

STRIKER™CAST
Quick Start Manual

Getting Started
Getting the Owner's Manual
Go to garmin.com/manuals
/STRIKERcast.
Charging the Device
WARNING
This device contains a lithium-ion battery.
See the Important Safety and Product
Information guide in the product box for
product warnings and other important
information.
NOTICE
To prevent corrosion, thoroughly clean
and dry the contacts and the surrounding
area before charging or connecting to a
computer. Refer to the cleaning
instructions (page 7).
1Plug the small end of the USB cable
into the charging port on your device.
2Plug the large end of the USB cable
into a USB charging port.
The status LED flashes red when the
device is charging.
3Charge the device completely.
The status LED and the device turn off
when the device is fully charged.
Automatic On and Off
The device turns on automatically when
you put it in the water. The device also
turns on automatically when you connect it
to USB power.
The device stays on as long as it is in the
water, which can be helpful for finding lost
devices. The device also stays on as long
as the app is connected.
2 Quick Start Manual

The STRIKER Cast app disconnects from
the device after about one minute of
inactivity (being in the background). The
device turns off automatically after 2
minutes of being disconnected from the
app and out of the water.
Connecting a Mobile Device
You must connect the STRIKER Cast
device to the STRIKER Cast app on your
mobile device to see sonar data.
TIP: The status LED flashes green and
red when the device is ready to connect to
the STRIKER Cast app.
1From the app store on your mobile
device, install and open the STRIKER
Cast app.
2Sign in to your Garmin® account.
TIP: If you do not have an account,
select Create One.
3Put the device in water, with the two
pins in contact with the water, to
turn on the STRIKER Cast device and
prepare it to connect.
TIP: You can also connect the device
to USB power and then immediately
disconnect it to turn on the device and
prepare it to connect.
The status LED flashes green and red
when the device is ready to connect to
the STRIKER Cast app.
4Select Connect > Start.
5Select your device from the list.
The serial number is printed on the
bottom of the device.
After you connect successfully, a message
appears, and you can see sonar data
when the device is in the water.
Attaching a Fishing Line or Tether
You can use the included nylon tether or
attach the device to a fishing line on a
fishing rod.
Quick Start Manual 3

• Attach the included nylon tether to the
device.
• Attach a 20-lb. test or higher fishing
line to the device using a #3 barrel
swivel with a snap, on a medium-
action or heavier fishing rod.
Fishing with the STRIKER Cast
Device
CAUTION
To avoid injury, always be cautious of your
surroundings when casting the device.
NOTICE
Garmin is not responsible for lost devices.
Only tow the device behind a vessel
moving at a slow trolling speed moving
slower than 8 km/h (5 mph).
To prevent corrosion, do not store the
device in water, and thoroughly dry the
device after use.
You can fish with the device in various
ways.
• Cast and leave the device on a
dedicated fishing rod so that you can
continually change the device location.
NOTE: Repeatedly casting the device
as you fish provides a clearer picture
of what is below the surface. This is
the recommended mode of use.
• Cast and tie off the device using the
included tether.
• Tether the device behind a small
vessel, such as a kayak.
4 Quick Start Manual

Sonar Screen
Depth
Water temperature
Water surface
Fish
Depth indicator as the sonar data screen
scrolls from right to left
Structure
Mapping a Body of Water Using the
Garmin Quickdraw™ Contours Feature
Before you can generate a map using the
Garmin Quickdraw Contours feature, you
must have sonar depth and GPS position
data.
You can only record Garmin Quickdraw
Contours mapping only using models that
have GPS. If your device does not have
GPS, you cannot record contours, but you
can download community contours.
1From the STRIKER Cast app, select
Chart.
2Select > Record.
As you fish with the STRIKER Cast
device, a map is generated.
A green circle indicates good depth,
GPS position, and a good speed. A
yellow circle indicates good depth and
GPS position, but the speed is a little
too fast. A red circle indicates poor
depth information, poor GPS position,
or a speed that is too fast.
When recording is complete, select >
Record to stop recording.
Downloading Garmin Quickdraw
Community Maps
You can download Garmin Quickdraw
Contours maps that other users have
created and shared with the Garmin
Quickdraw Community.
1From the STRIKER Cast app on your
mobile device, select Chart > >
Quick Start Manual 5

Quickdraw > Download from
Community.
2Use the map and search features to
locate an area to download.
The red dots represent Garmin
Quickdraw Contours maps that have
been shared for that area.
3Tap the map to select an area.
4Drag the box to move the download
area, if necessary.
5Drag the corners to change the
download area, if necessary.
6Select Download Area.
You can now view depth information in the
downloaded area on the Chart page.
Marking a Waypoint on the Chart
1Select a location on the chart.
2From the Radial menu, select to
save the location as a waypoint.
Device Information
Specifications
Battery type Rechargeable, built-in
lithium-ion battery
Battery life 10 hr. typical use
Battery charge time Approximately 1.5 hr.
Power adapter (not
included in the box,
recommended)
5.5 V, 1.0 A.
Standard USB wall
outlet, computer port, or
vehicle charger.
Included tether
length
5 m (16 ft.)
Water rating Floatable, IEC 60529
IPX7 1
Weight 70 g (2.5 oz.)
Operating
temperature range
From -20° to 60°C
(from -4° to 140°F)
Charging
temperature range
From 0° to 45°C (from
32° to 113°F)
Compass-safe
distance
2.54 cm (1 in.)
Wireless frequency 2.4 GHz @ 9.65 dBm
Wireless range 60 m (200 ft.) 2
Sonar frequency 260/455 kHz
Sonar depth range From less than 0.6 m to
45 m (from less than
2 ft. to 150 ft.)
1 For more information, go to garmin.com/waterrating.
2 The wireless range can be affected by the water
conditions.
6 Quick Start Manual

Cleaning the Device
NOTICE
Even small amounts of moisture can
cause corrosion of the electrical contacts
when connected to a charger. Corrosion
can prevent charging and data transfer.
Do not use harsh or solvent-based
cleaners on the device. Using such
cleaners may damage the product and
void the warranty.
1Clean all water and residue from the
device using a clean, damp cloth
soaked in fresh water.
2Use a mild detergent to remove heavy
buildup of salt or stains.
3Wipe the device dry.
Allow the device to dry completely,
especially before connecting the charger.
物質宣言
部件名称 有毒有害物质或元素
铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
印刷电路板组件 X O O O O O
金属零件 X O O O O O
电缆 电缆组件 连接器 X O O O O O
本表格依据 SJ/T11364 的规定编制。
O: 代表此种部件的所有均质材料中所含的该种有害物质均低于
(GB/T26572) 规定的限量
X: 代表此种部件所用的均质材料中, 至少有一类材料其所含的有害物质高于
(GB/T26572) 规定的限量
*該產品說明書應提供在環保使用期限和特殊標記的部分詳細講解產品的擔保
使用條件。.
產品
Quick Start Manual 7

support.garmin.com
© 2019 Garmin Ltd. or its subsidiaries
Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other
countries. STRIKER™ is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the
express permission of Garmin.
M/N: 03754 FCC: IPH-03754 IC: 1792A-03754 Garmin Corporation
Printed in Taiwan
December 2019
190-02656-90_01
garmin.com/manuals/STRIKERcast
Owner's Manual · 用户手册 ·使用者手冊 · Korisnički
priručnik · Brugervejledning · Gebruikershandleiding ·
Käyttöopas · Manuel d'utilisation · Benutzerhandbuch ·
Εγχειρίδιο κ ατόχου · Manual Utente · ママニュアル ·
사용설명서 · Brukerveiledning ·
Podręcznik użytkownika · Manual do proprietário ·
Priročnik za uporabo · Manual del usuario ·
Användarhandbok · ค มอสาหรบเจ าของ