GARO Wallbox GLB User manual

EN
GARO Wallbox GLB
Assembly instructions / End User Instruction (EN)
380185-3.2

2 3
ENEN
Serienr/SSID password endast wifiversion
GARO Wallbox GLBGARO Wallbox GLB
D
A
E
C
B
H
G
F
(figure 1)
with cable and connector, type 1 or 2 with type 2 socket outlet
(figure 3)
(figure 2)
I
A. Front cover
B. Cover
C. Back panel
D. Indication light
E. Key
F. Connector type 1 or 2
G. Type 2 socket outlet
H. RCCB (Residual Current Circuit Breaker) or RCBO (Residual Current Breaker with
Overcurrent Protection). Energy meter.
I. Serial no./SSID, password (Wi-Fi version only)

4 5
ENEN
TABLE OF CONTENTS
About this manual 7
Safety Information 8
Technical data 13
Mainboard simplified connection diagram 14
Dimensional drawing 15
Assembly instructions for installer 16
Box Contents 18
Tools and Materials Required 19
Step-by-Step Installation 20
Reducing the charging current 27
Remote control of charger via enable input 28
Dynamic Load Management (DLM) for individual chargers 30
Dynamic Load Management (DLM) for multiple chargers in group 34
Activating RFID reader 40
Deactivating RFID reader 40
End User instruction 42
Charging electric vehicles 45
Resetting/Conditioning of RCCB or RCBO 47
Connecting to the wallbox's Wi-Fi access point (AP) 49
Web interface 51
Scheduled charging 53
Limit charging current 57
Connect charger to a local network via Wi-Fi 58
Activating RFID tags 61
Deleting RFID tags 61
Care 63
Troubleshooting 64
Index 66

6 7
ENEN About this manual
The purpose of this Manual is to provide you with the necessary information to charge
your electric vehicle using Garo Wallbox, models GLB.
This document contains general descriptions which are verified to be accurate at the time
of printing. However, because continuous improvement is a goal at GARO, we reserve
the right to make product modifications at any time.
About this manual

8 9
ENEN Safety Information Safety Information
Hazard categories and special symbols
Read these instructions carefully before trying to install, operate, or maintain it.
Save the manual for future use.
Indicates a potentially hazardous situation which could result in death or
serious injury
Indicates a potentially hazardous situation which could result in minor or
moderate injury
Indicates practices that do not involve the risk of bodily injury
Safety Information
Warnings
This equipment should not be used by anyone (including children) with reduced
physical, sensory or mental capacity, or anyone lacking in experience or
knowledge, unless they are provided with supervision or prior instruction in how
to use the equipment by the person responsible for their safety.
The GLB Wallbox range of charging stations is designed exclusively for charging
electric vehicles.
The GLB Wallbox must be grounded through a permanent wiring system.
Do not install or use the GLB Wallbox near flammable, explosive, harsh, or
combustible materials, chemicals, or vapors.
Turn off input power at the circuit breaker before installing, configuring or
cleaning of the GLB Wallbox.
Use the GLB Wallbox only within the specified operating parameters.
Never spray water or any other liquid directly at the GLB Wallbox. Never spray
any liquid onto the charge handle or submerge the charge handle in liquid. Store
the charge handle in the dock to prevent unnecessary exposure to contamination
or moisture.
Do not use this equipment if it appears to be damaged or if the charging cable
appears to be damaged.
Do not modify the equipment installation or any part of the product.
Do not touch the GLB Wallbox’s end terminals with fingers or any other objects.
Do not insert foreign objects into any part of the GLB Wallbox.