GE PP975SMSS Manual

For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
ge.com or call GE Answer Center®service,
800.626.2000.
Listed by
Underwriters
Laboratories
†Note: Check local codes for required breaker size
Important: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a
15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
a 48" flexible armored cable.
Note: 36" Ribbon cooktops are approved for use over GE 30" Single Wall
Ovens and Warming Drawers only. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for
current dimensional data. If installed with a GE Profile™ Telescopic
Downdraft System, consult both the cooktop and downdraft installation
instructions packed with product before installing. Cooktop gas/electric
supply may need to be re-routed to install downdraft. The countertop
must be at least 26" deep with a flat surface area of 23-1/2" or more,
front to back. In addition, other clearances to the front edge of the
countertop must be considered, especially on raised bullnose countertops.
Consult cabinet and countertop manufacturer’s specs for flush mount
installation prior to install.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
KW Rating
240V 8.9
208V 6.7
Breaker Size
240V 40 Amps†
208V 40 Amps†
3-1/4*
Cooktop
2-1/2**
Required
33-7/8
19-1/8
36
36_color_cktp_install
20-7/8
Electrical junction box 16" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure
at front
2 " MIN.
clearance to
side wall
from cut-out
2 " MIN.
clearance to
side wall
from cut-out
1-3/4 " to
rear wall
13" MAX.
depth
*Depth of unit at conduit connection location (rear) is
6-1/4" on models PP980/975/950/945 and 4-5/8"
on models PHP960/900, PP972/962/942/932/912
and JP6SS/356/346/340.
**Raised bull nose countertops may require up to
3/8" additional clearance to prevent interference
with curved front.
15" MIN.
to cabinet
220592
Specification Revised 4/09
Dimensions and Installation Information (in inches)
PP975SM
GE Profile™ 36" Built-In CleanDesign Electric Cooktop

220592
Features and Benefits
• Electronic Touch Controls - Offer easy, point-and-cook convenience
• Ribbon Heating Elements - Provide powerful heat beneath a smooth
glass surface to ensure even heat and fast warm-up times
• PowerBoil™Element - Provides up to 3,000 watts of power to speed
the boiling process
• Dual Size Ribbon Element - Offers a convenient choice of using a
5" or 8" heating element depending on the size of the pan
• Control Lock Capability - Provides the ability to lock controls, helping
protect from unintentional activation
• Stainless Steel Frame - Brings an added touch of style to any decor
and perfectly complements all other stainless steel appliances in
the kitchen
• 12"/9"/6" Tri-Ring Element - Accommodates various-sized pots
or pans for the ultimate in cooking versatility
• Warming Zone - Provides low heat capability for foods, making meal
coordination simple
• Model PP975SMSS - Stainless steel
PP975SM
HOT SURFACE
CONTROL
LOCK
Specification Revised 4/09
PP975SM
GE Profile™ 36" Built-In CleanDesign Electric Cooktop