GE Profile PP950 Manual

For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
ge.com or call GE Answer Center®service,
800.626.2000.
220597
Listed by
Underwriters
Laboratories
3-1/4*
Cooktop
2-1/2**
Required
28-1/2
19-5/8
29-3/4
30_color_cktp_install.eps
21-3/8
Electrical junction box 16" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure
at front
1-1/2 " MIN.
clearance to
side wall
from cut-out
1-1/2
"
MIN.
clearance to
side wall
from cut-out
1-3/4
"
to
rear wall
13" MAX.
depth
*Depth of unit at conduit connection location (rear) is
6-1/2" on models PP980/975/950/945 and 4-5/8"
on models PHP900/PP972/962/942/932/912,
JP655/356/346.
**Raised bull nose countertops may require up to
3/8" additional clearance to prevent interference
with curved front.
15" MIN.
to cabinet
†Note: Check local codes for required breaker size
Important: Requires a 5” free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a
15” minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
a 48” flexible armored cable.
Note: 30” Ribbon cooktops are approved for use over select GE 30” Single
Wall Ovens and Warming Drawers. All 30" ribbon cooktops can be installed
over 27" wall ovens and warming drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile™ Telescopic Downdraft System,
consult both the cooktop and downdraft installation instructions packed
with product before installing. Cooktop gas/electric supply may need to be
re-routed to install downdraft. The countertop must be at least 26" deep with
a flat surface area of 23-1/2" or more, front to back. In addition, other
clearances to the front edge of the countertop must be considered.
Consult cabinet and countertop manufacturer’s specs for flush mount
installation prior to install. Before installing, consult installation
instructions packed with product for current dimensional data.
KW Rating
240V 7.4
208V 5.6
Breaker Size
240V 40 Amps†
208V 30 Amps†
PP950WM/BM
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
Specification Revised 12/07

WARMER
SIZE SELECT
SIZE SELECT
TIMER SENSORS
CONTROL
LOCK
PAN
HR MIN
PP950BM/WM
Features and Benefits
• Electronic Touch Controls - Offer easy, point-and-cook convenience
• Precise Digital Control System™- Delivers accurate control on the
cooktop, ensuring even heating and less temperature variation
• Electronic Kitchen Timer - Provides convenient notification to help
coordinate meal preparation and cooking times
• Pan Presence Sensor - Detects when a burner element is left "on"
and automatically shuts it off when not in use
• Pan Size Sensor - Automatically adjusts the heating element to the
size of the pan
• Dual Size Ribbon Elements - Offers a convenient choice of using a 6"
or 9" on one and a 5" or 8" on the other heating element, depending
on the size of the pan
• Warming Zone - Provides low heat capability for foods, making meal
coordination simple
• Ribbon Heating Elements - Provide powerful heat beneath a smooth
glass surface to ensure even heat and fast warm-up times
• Model PP950WMWW - White on white
• Model PP950BMBB - Black on black
PP950WM/BM
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
220597
Specification Revised 12/07