GE PROFILE P8MSASS6TBB User manual

v
49-9000044 Rev. 0 10-22 GEA
GE PROFILE SMART MIXER WITH AUTO SENSE
OWNER'S MANUAL
ENGLISH / FRANÇAIS
P8MSASS6TBB / P8MSASS6TOW / P8MSASS6TGW

249-9000044 Rev. 0
THANK YOU FOR MAKING GE APPLIANCES A
PART OF YOUR HOME.
Whether you grew up with GE Appliances, or this is your first,
we’re happy to have you in the family.
We take pride in the craftsmanship, innovation and design that
goes into every GE Appliances product, and we think you will too.
Among other things, registration of your appliance ensures that
we can deliver important product information and warranty details
when you need them.
GE is a trademark of the General Electric Company. Manufactured under trademark license.

49-9000044 Rev. 0 3
Table of Contents
Product Registration
SAFETY INFORMATION ......................................4
GETTING STARTED ..........................................6
CONTROLS .................................................7
PARTS INCLUDED ...........................................8
SPEED CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
TIPS ......................................................10
USING YOUR STAND MIXER.................................. 11
CARE AND CLEANING.......................................16
TROUBLESHOOTING ........................................17
LIMITED WARRANTY .......................................18
CONSUMER SUPPORT.......................................19
Write the model and serial numbers here:
Model #_________________
Serial # _________________
Find these numbers on the label on the back of the unit.

449-9000044 Rev. 0
WARNING The appliance is designed for household use and may only be
operated in accordance with these instructions for use. Always handle with care
and warn other users of potential danger. Failure to follow these instructions can
result in death, re, electric shock or personal injury.
IMPORTANT SAFEGUARDS
Always follow these safety precautions when using this appliance.
• Read all instructions before using
• DO NOT immerse the appliance in water or any other liquids. This will damage
the appliance and be a risk of an electric shock.
• Use only a 120 V, 60 Hz standard electrical supply that is properly grounded in
accordance with the National Electric Code and local codes and ordinances.
• Make sure the appliance is set up on a at and steady surface.
• Turn the appliance OFF, then unplug from the outlet when not in use, before
assembling or disassembling parts and before cleaning. To unplug, grasp the plug
and pull from the outlet. Never pull from the power cord.
• Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas and
other utensils away from attachments (beaters, whisks, dough hook, etc) during
operation to reduce the risk of injury to persons, or damage to the mixer.
• Do not use outdoors.
• Use this product only for its intended purpose as described in this user manual.
• The use of attachments not recommended or sold by the manufacturer may
cause re, electric shock or injury.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they are closely supervised and instructed concerning use
of the appliance by a person responsible for their safety. Close supervision is
necessary when any appliance is used by or near children. Children should be
supervised to ensure that they do not play with the appliance.
• Do not allow children to touch the appliance or the power cord during the
operation.
• DO NOT let the appliance run unattended.
• Allow to cool before putting on or taking o󰀨 parts, and before cleaning the
appliance.
• To reduce the risk of fire or electric shock, do not attempt to disassemble, repair,
modify, or replace any part of your product.
• If the power cord is damaged, it must be replaced by the manufacturer. DO NOT
replace the power cord on your own.
• Do not operate any appliance with a damaged cord, plug, after the appliance
malfunctions, is dropped, or damaged in any manner. Contact GE Appliances
at the website listed in the Contact Us section for information on examination,
repair, or adjustment.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

49-9000044 Rev. 0 5
WARNING The appliance is designed for household use and may only be
operated in accordance with these instructions for use. Always handle with care
and warn other users of potential danger. Failure to follow these instructions can
result in death, re, electric shock or personal injury.
IMPORTANT SAFEGUARDS
Always follow these safety precautions when using this appliance.
• DO NOT use an extension power cord.
• Do not let cord hang over edge of table or counter.
• Do not let cord contact hot surface, including the stove.
• Remove beater, whisk, and dough hook from appliance before washing.
• Use caution when mixing hot ingredients to avoid splashing and burns.
• Do not exceed the maximum capacity as indicated on the accessories (bowl).
Follow the quantities, processing time and speed when using the stand mixer
tools, as indicated in the user manual.
SAVE THESE INSTRUCTIONS
WARNING RISK OF FIRE OR ELECTRIC SHOCK
■ TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE ANY
COVER OR OUTER HOUSING COMPONENTS OF THE APPLIANCE.
■ Do not attempt to repair or replace any part of your stand mixer unless it
is specifically recommended in this manual. All other servicing should be
performed by authorized service personnel.
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
PROPER DISPOSAL OF YOUR APPLIANCE
Dispose of or recycle your appliance in accordance with Federal and Local
Regulations. Contact your local authorities for the environmentally safe disposal or
recycling of your appliance.

649-9000044 Rev. 0
Getting Started
Before First Use
Read all safety instructions before the rst use.
Be sure to clean your stand mixer as listed in the Care and Cleaning section of
this manual.
Thoroughly clean the parts that come into contact with food before you use
the appliance for the rst time. Refer to the instructions and table for cleaning
given in the user manual
For household use only.
Electrical Requirements
Voltage: 120 A.C. only. Frequency 60 Hz. The wattage rating for the stand
mixer is printed on the serial plate.
Do not use an extension cord. The maximum electrical rating is based on the
attachment that uses the highest amperage.
Mixing Bowl Notes
Turn the speed dial to the O󰀨 position before starting.
Follow the recommended quantities, processing time, and speed as indicated
in this owner's manual. DO NOT exceed suggested processing speed, doing
so could harm the appliance.

49-9000044 Rev. 0 7
Controls
Use the speed dial to select your
desired speed.
NOTE: The Rev/Zero and
Scale/Timer buttons are one single
button with two functions that should
be pressed in the middle.
NOTE: Make sure the speed dial
is O󰀨 when not in use, before
unplugging, and before locking the
bowl lift.
See page 8 for mixing chart.
Rev / Zero
Scale / Timer
Stir 2 4 6 8 10 11
LED Screen
Rotating Speed Dial
Scale/Timer Button
Right Toggle Button
Reverse direction/
Scale Zero Function
Start/Pause
O󰀨 Position Manual Speed Settings
LED Light Bar
Left Toggle
Button

849-9000044 Rev. 0
1Control Panel
2Speed Dial
3LED Screen and LED
Progress Light Bar
4Speed Settings
5Thumb Screw
(PTO for accessory
attachments)
6Orbital Head
7Locating Pins
8Bowl Lift Arms
9Bowl Carrier
10 Power Cord
11 Bowl
12 11-Wire Whisk
13 Commercial Grade
Stainless Steal
Beater
14 Commercial Grade
Stainless Steel
Dough Hook
15 Bowl Shield
Parts Included
1
2
3
6
8
9
7
5
10
11 12
4
13 14
15

49-9000044 Rev. 0 9
Speed Chart
Accessory Speed Purpose
Beater
Stir Slow stir ingredients.
2-4 Stir wet batters, combine mixtures, blend frosting, or mash
potatoes.
5-6 Cream butter or blend heavier batters with nuts or chips.
Dough Hook
Stir-2
Mix and knead doughs.
NOTE: DO NOT use the dough hook above speed 2.
Doing so could result in product failure.
11-Wire Whisk
6-11
For whipping cream or egg whites, It is recommended to
slowly increase to higher speeds and then maintain at high
speeds until desired result.
NOTE: DO NOT use the reverse function with third party accessories.
NOTE: The Profile Smart Mixer is compatible with KitchenAid®
attachments.

10 49-9000044 Rev. 0
Tips
• To avoid splatter, always increase speed gradually.
• Whisk: before whisking egg whites or cream, make sure that the bowl and
the whisk are dry and free from grease.
• Kneading: use the dough hook to knead yeast dough for bread and pizzas.
• Adjust the amount of liquid to form the dough according to the humidity and
temperature condition.
• If you want to re-knead the dough with your stand mixer, press the dough
down to the bottom of the bowl to avoid the dough wrapping on the tool.
Make sure that you re-knead the dough within the recommended speed.
Batter
When making cake batter with the beater attachment, be careful to not over
beat the batter. This can add extra air into the batter and cause the cake to
mound in the center and crack while baking.
Whisking
Always make sure your bowl and accessories are clean and dry when you are
whisking egg whites or whipping cream.
The weather can a󰀨ect your egg whites. Humidity can make it di󰀩cult to
create the sti󰀨 white peaks due to moisture in the air.
A great way to create whipping cream is to chill the whisk and bowl in your
refrigerator for 20-30 minutes before whisking.
Dough
It is sometimes helpful to start blending your dough with the beater accessory
until a loose dough is formed. Then switching the beater for the dough hook.
This is not a required step but can be helpful with wet doughs.
Make sure to stay at the recommended dough speed to prevent over
kneading.
Frequent scraping of the bowl will prevent the dough from sticking to the
bottom of the bowl or climbing the dough hook, especially when you have a
very wet dough.

49-9000044 Rev. 0 11
Using your Stand Mixer
4Insert your desired attachment. Push attachment into the output shaft until a click is heard
and the attachment is held firmly in place. See the speed chart on page 9 for a guide on
attachment use.
2Lower the bowl lift arms by pressing down on the lift arms.
1 Make sure the mixer is unplugged and turned off.
Appearance may vary slightly
3 Place the bowl into the bowl arms and align on pins. Push the bowl back towards the mixer
body until it clicks into place.
Ready
Push upward
Ready

12 49-9000044 Rev. 0
6Slide the bowl shield onto the bowl if
desired. 7 Plug the mixer into an outlet.
5When the bowl and attachment are in place, raise the bowl arms by slowly pushing up on
arms until they lock into place.
Using your Stand Mixer
8Use the speed dial and turn to your desired
speed. When finished, turn back to the off
position.
9Pull down on the quick change to release
your attachment.
10 Unplug the mixer from the outlet.
Appearance may vary slightly
Image shows
the speed
dial in OFF
position
Attachment
output shaft
Ready
Ready
Ready

49-9000044 Rev. 0 13
Using your Stand Mixer
NOTE: If your stand mixer is plugged in and not turned on, press any button to wake
up the machine.
Speed Control
The Speed Control allows the user to
set their speed by rotating the speed dial
between stir and 11.
"Ready" will appear on the screen when
the mixer is turned on.
The speed will appear on the screen
when the speed dial is turned.
When nished, rotate the speed dial back
to the OFF position and OFF will appear
on the screen.
Pause
Press the center button to pause during
your mix cycle.
Reverse
Anytime during the Manual Speed Control
mode, the direction of the mixer can be
reversed.
Press the Rev/Zero button to reverse the
direction. An "R" will appear on the screen
next to the speed.
Stand Mixer Settings
Rev / Zero
Scale / Timer
Stir 2 4 6 8 10 11
Screen
Connected
position
Speed
Dial
Control

14 49-9000044 Rev. 0
Using your Stand Mixer
NOTE: If your stand mixer is plugged in and not turned on, press any button to wake
up the machine.
Scale
Radial fill from top to bottom to Solid White: On Three flashes of Yellow to Solid White to Solid Orange: Scale
Flashing Red: Error
White Radial from bottom to top to Black: Cancel
Rotating Segment White: Mixing
Radial Blue from top to bottom to Solid White: Timer
Radial Magenta from top to bottom to Solid White: Smart Sense Cycle
Rotating Segment Magenta to Solid Magenta to Solid White: WiFi
The Manual Scale mode measures the
amount of ingredients in the mixer bowl in
grams/lb/kg/oz.
The direct weight can be taken in the
mixer bowl or in any container on the
base of the stand mixer.
To start, in the OFF position, press the
Scale/Timer Button. The light bar will
show yellow.
Make sure the screen shows zero before
weighing your ingredients.
Then the screen will read the weight.
Example: "200g"
To Zero the scale feature, press the Rev/
Zero button. The Stand mixer screen will
show "----" while it is setting to zero. Then
"0g" will show on the screen when it is
complete. If the screen does not show
zero, press the Rev/Zero button to reset.
Make sure the screen shows zero before
weighing your ingredients.
Use the toggle arrows when using the
scale to change the scale's units.
Timer
Radial fill from top to bottom to Solid White: On Three flashes of Yellow to Solid White to Solid Orange: Scale
Flashing Red: Error
White Radial from bottom to top to Black: Cancel
Rotating Segment White: Mixing
Radial Blue from top to bottom to Solid White: Timer
Radial Magenta from top to bottom to Solid White: Smart Sense Cycle
Rotating Segment Magenta to Solid Magenta to Solid White: WiFi
Press the Timer button to initiate the
Timer setting. The screen will briey read
"Timer" then switch to 00:00. The light
bar will show blue. Use the left and right
arrows to set the timer to your desired mix
time.
Press the center button to start the timer.
NOTE: The Timer increases at 15 second
increments with a single press. Press and
hold the Scale/Timer button to increase
by 1 minute increments.
Auto Shuto󰀨
The automatic shuto󰀨 feature turns the
Smart Stand Mixer o󰀨 when the timer
ends for extra convenience and perfectly
executed recipes.
NOTE: Time can be added while the timer
is running.
Control Lock
Radial fill from top to bottom to Solid White: On Three flashes of Yellow to Solid White to Solid Orange: Scale
Flashing Red: Error
White Radial from bottom to top to Black: Cancel
Rotating Segment White: Mixing
Radial Blue from top to bottom to Solid White: Timer
Radial Magenta from top to bottom to Solid White: Smart Sense Cycle
Rotating Segment Magenta to Solid Magenta to Solid White: WiFi
To lock the control panel and dial, press
and hold the left and right arrows at the
same time for 3 seconds. The light bar
will show white.
Use the same action to unlock.
WiFi Connect
Download the Smart HQ app from the
Apple Store or Google Play.
Rotate the speed dial to the connected
icon and follow the directions within the
Smart HQ app to get connected.
Once connected, follow the directions
within the app for how to use the Smart
Features.
Over-the-air (OTA) updates
With over-the-air updates, you get new
features like Auto Sense and Guided
Recipes as they become available, so the
Smart Stand Mixer keeps getting better
with time.
Stand Mixer Settings

49-9000044 Rev. 0 15
Using your Stand Mixer
Smart Features
Adjusting the Bowl Height
Your Stand Mixer is equipped with smart features to enhance your baking and cooking
experience. Download the Smart HQ app from the App store or Google Play to access
these features.
Auto Sense
The Smart Stand Mixer with Auto Sense
Technology actively monitors changes
in viscosity by means of motor torque
feedback to optimize mixing, whipping
and emulsifying performance. Follow the
directions provided in the Smart HQ app.
Connected Guided Recipes
The Connected Guided Recipes feature
provides recipes and steps on how to
complete each recipe.
Use the SmartHQ app for guided recipes.
1. Unplug the mixer from the outlet.
2. Make sure the bowl arms are down.
3. Attach your desired attachment.
4. Turn the bowl lift screw behind the bowl
with a athead screwdriver to raise and
lower the bowl height. You want your
attachment to sit right above the bottom
of the bowl. The attachment should not
be touching the bowl. Turn the screw
counterclockwise to raise the bowl and
clockwise to lower the bowl.
5. Once your bowl is in the desired
position, push the bowl arms up.
Bowl lift
screw

16 49-9000044 Rev. 0
Care and Cleaning
1. Clean the main unit with a damp cloth.
2. Clean the other parts in hot water either in the sink or dishwasher after
referring to the table.
3. Store the appliance in a dry place after cleaning.
Part Sink Dishwasher Damp Cloth
Stand Mixer Body 
Bowl / Bowl Lid   
Whisk   
Beater   
Dough Hook   
Attachment Output Shaft Cleaning Tips:
1. Wipe down the attachment output shaft after
each use to remove excess flour.
2. For dry ingredients, use a warm, damp, cloth to gently wipe down
the exterior and remove any dust that might remain.
3. For wet ingredients, use a warm, damp, soapy cloth to gently
wipe down the exterior and any dough that might remain.
4. To ensure the full range of motion is cleaned; gently pump the attachment
output shaft up and down with the damp cloth.
5. Use a cleaning brush to remove any dough that may have blocked the
attachment output shaft.
NOTE: Attachment must be inserted into the output shaft for full range of motion.
WARNING
Unplug the appliance before cleaning.
Refer to the table below before cleaning the parts with water, a damp
cloth, or using any parts in the dishwasher.
DO NOT soak accessories in acidic liquid.
Failure to do so can result in death, re, electrical shock or personal
injury
Attachment
output shaft

49-9000044 Rev. 0 17
Troubleshooting
Problem Cause Solution
Appliance does not
work/does not turn
on.
No power is connected to the appliance. ■ Check that the cable and plug are
connected to power.
■ Check the ground fault circuit breaker
(GFCI) plug.
Appliance is making
weird noises
There is more than the recommended
amount of ingredients in the mixing bowl.
Immediately turn o󰀨 the appliance,
unplug from the outlet, and remove
some of the food.
There is a malfunction with the appliance. Immediately turn o󰀨 and unplug the unit.
Visit geappliances.com for support
Appliance is
smoking/producing
weird smells
There is a malfunction with the appliance Immediately turn o󰀨 and unplug the unit.
Visit geappliances.com for support

18 49-9000044 Rev. 0
■Service trips to your home.
■Improper installation, delivery or
maintenance.
■Failure of the product if it is abused, misused,
or used for other than the intended purpose
or used commercially.
■Replacement of house fuses or resetting of
circuit breakers.
■Damage caused after delivery.
■Damage to the product caused by accident,
fire, floods or acts of God.
■Incidental or consequential damage caused
by possible defects with this appliance.
■Labor and other charges to install and/or
remove the product
What GE Appliances Will Not Cover:
For the Period of: GE Appliances Covers
One Year
From the date of the
original purchase
If the stand mixer fails due to a defect in materials or workmanship,
during the limited one-year warranty, GE Appliances will either repair
your product, replace your product with a new or remanufactured
product, or refund the purchase price of the product at GE Appliances
sole discretion.
Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty.
GE Appliances Limited Warranty
EXCLUSION OF IMPLIED WARRANTIES
Your sole and exclusive remedies are product exchange or refund as provided in
this Limited Warranty. Any implied warranties, including the implied warranties of
merchantability or fitness for a particular purpose, are limited to one year or the shortest
period allowed by law.
For US Customers: This limited warranty is extended to the original purchaser for products
purchased for home use within the USA. In Alaska and Hawaii, the limited warranty does not
include the costs of shipping units.
Some states do not allow the exclusion or limitation of incidental or consequential damages.
This limited warranty gives you specific legal rights, and you may also have other rights
which vary from state to state. To know what your legal rights are, consult your local or state
consumer affairs office or your state’s Attorney General.
Warrantor: GE Appliances, aHaier company
Louisville, KY 40225
For Customers in Canada: This limited warranty is extended to the original purchaser
and any succeeding owner for products purchased in Canada for home use within Canada.
In-home warrant service will be provided in areas where it is available and deemed
reasonable by Mabe to provide. For extended warranty information, visit geappliances.ca/
purchase-extended-warranty
Warrantor Canada: MC Commercial, Burlington, Ontario, L7R 5B6
If your appliance fails to operate properly while in use under normal household conditions within the
warranty period, visit geappliances.com/contact for product care/maintenance self-help.
To initiate a warranty claim, please visit geappliances.com/contact, or call 1-800-GECARES.
Please have your model number and serial number available. Return and packing instruction
information will be provided at that time.

49-9000044 Rev. 0 19
Consumer Support
Service and Registration
Register your new appliance on-line at your convenience! Timely product registration will allow
for enhanced communication and prompt service under the terms of your warranty, should the
need arise.
Register your appliance at GEAppliances.com/register.
In Canada, service.geappliances.ca/servicio/en_CA/
Contact Us
If you are not satisfied with the service you receive from GE Appliances, contact us on our
website with all the details including your phone number, or write to:
In the US: General Manager, Customer Relations | GE Appliances, Appliance Park | Louisville,
KY 40225
GEAppliances.com/contact
In Canada: Director, Consumer Relations, MC Commercial Inc. | Suite 310, 1 Factory Lane |
Moncton, N.B. E1C 9M3
GEAppliances.ca/en/contact-us

20 49-9000044 Rev. 0