GE VG4062 User manual

To reduce the risk of electric shock, do not
remove cover (or back). No user serviceable
RISK OFELECTRICSHq parts inside. Refer servicing to qualified
DO NOT OPEN service personnel.
This symbol indicates _This symbol indicates
"dangerous voltage" _important instructions
inside the product that accompanying the
presents a risk of electric product.
shock or personal injury.
Caution: To reduce the risk of electric shock, match
wide blade of plug to wide slot, fully insert.
Attention: Pour _viter les chocs _lectriques,
introduire la lame la plus large de la fiche darts la
borne correspondante de la prise et pousser jusq_ au
fond.
Refer to the identification/rating label located on the back panel of your
product for its proper operating voltage.
FCC Regulations state that unauthorized changes or modifications to this
equipment may void the user's authority to operate it.
Cable TV Installer: This reminder is provided to call your attention to
Article 820-40 of the National Electrical Code (Section 54 of the Canadian
Electrical Code, Part 1) which provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building as close to the point of cable entry
as practical.
i
To reduce the risk of fire or
shock hazard, do not expose
this product to rain or moisture.
Product Registration
Please fill out the product registration card and return it immediately.
Returning this card allows us to contact you if needed.
Keep your sales receipt to obtain warranty parts and service and for
proof of purchase. Attach it here and record the serial and model
numbers in case you need them. The numbers are located on the back
of the product.
Model No. VG4062
Serial No.
Purchase Date:
Dealer/Address/Phone:

First Things First ..... ,............................................ 3
Setting Up the VCR .............................................. 8
Using the Menu to Set Up Features ....................................... 8
Language ................................................................................. 8
Cable Box Setup ...................................................................... 8
VCR Channels List ................................................................. 10
To Auto Channel Search .................................................. 10
To Change the SignalType ............................................. 11
To ADD or REMOVE Channels ........................................ 11
Time and Date ....................................................................... 12
Set Daylight-SavingTime ................................................ 12
Set theTime and Date ..................................................... 12
VCR Plus+ Channels .............................................................. 13
VCR Plus+ Worksheet ............................................................ 15
Additional Set-Up Features in the Preferences Menu ........ 16
Remote VCR1/VCR2 Option ............................................. 16
Auto Play .......................................................................... 17
AutoTV/VCR ..................................................................... 17
EnergySaver TM ................................................................. 18
•Tape Speed ....................................................................... 18
VCR Basics ........................................................ 19
Remote Buttons ..................................................................... 20
Playing aTape ........................................................................ 21
Automatic Rewind ........................................................... 22
Tape Eject ......................................................................... 22
Recording ............................................................................... 22
Check the SafetyTab ........................................................ 22
Recording .......................................................... 23
Recording Features ............................................................... 24
Express Recording (XPR) ................................................ 24
Timer Recording .............................................................. 25
Timer Recording With VCR Plus+ ................................... 26
Setting Up the Channel List ...................................... 26
Using VCR Plus+ ........................................................ 26
Stopping aTimer Recording ..................................... 28
Reviewing and Clearing Programs ........................... 28
UsingTwoVCRs for Copying and EditingTapes .................. 29

Other Features ...... ............................................. 31
Picture Search Options ......................................................... 32
Forward and Reverse Search .......................................... 32
Slow Motion .................................................................... 32
Commercial Scan (Search Button) ................................. 32
Frame Advance ................................................................ 33
Index Search .................................................................... 33
Zero Search ...................................................................... 34
Pro-Tect Plus TM Locking Feature ........................................... 34
Time Counter ......................................................................... 35
On-Screen Displays ............................................................... 35
Tracking .................................................................................. 36
Connections ....................................................... 37
ConnectingYour VCR ............................................................. 38
Jacks and Cables ............................................................. 38
RF Jacks and Antenna Cables (F-type) ........................... 38
Audio/Video Jacks and Cables (RCA-type) .................... 38
Choosing a VCR Connection ................................................ 39
Advantages of Audio/Video Cable Connections ........... 39
TVWith RF Jack Only ............................................................ 40
TV With Audio/Video Jacks ................................................... 41
TVWith Audio/Video Jacks and Cable Box to
Unscramble Pay Channels Only ...................................... 42
Reference .......................................................... 43
Front Panel ............................................................................. 44
Back Panel .............................................................................. 45
Indicator Panel ....................................................................... 45
TroubleshootingTips ............................................................. 46
Specifications ........................................................................ 49
Cleaning the VCR ................................................................... 49
Limited Warranty ................................................................... 50
Index ....................................................................................... 51
2

Hi, my name is Roger...
and I wrote this User's Guide. It's my job to see that
you have a rewarding user manual experience.You'll
find that I've arranged this manual to clearly explain
all yourVCR's features.
1FIRST THINGS FIRST
Read the First Three Sections V
The first three sections of the manual introduce you to
your VCR, and show you how to set the VCR up and
use the on-screen menus. Reading these sections
gives you the basic information you need to use your
VCR. V
What's Left?
The rest of the book highlights playback and recording
information, contains a detailed connections section,
and a reference section that includes troubleshooting
tips, limited warranty, and index.
Y
V
¥
READ ME! 1
These note boxes give you tips for
your new video cassette recorder.
3

STEP 1: Unpack What's in the Box
The following items come packed in the box:
•VCR
•Remote control
• RF antenna cable
STEP 2: Install Batteries in the
Remote Control
Follow these steps whenever you need to install or change the
batteries in yourVCR remote.
1. Remove the cover of the battery compartment.
2. Place batteries in remote, matching the +and - ends of each
battery to the diagram inside the compartment.
3. Replace the cover.
STEP 3: Connect Your VCR
If you connect yourVCR to your home antenna or cable system
and then to yourTV, use theVCR's IN FROM ANT. and OUTTOTV
jacks for a good signal as shown.
If you have aTV with AUDIO/VIDEO jacks, use the audio/video
jacks on theTV and VCR for a better connection. Refer to the
Connections section, toward the back of the manual.
STEP 4: Plug in the VCR
Match the wide blade of the plug with the wide slot in the outlet.
Be sure to insert the plug completely.
VCR
TV
CABLE, CABLE BOX, OR_AANTENNA
AUDIO VIDEO
_ _-_ •
_,4FAJHF
O_IT TO TV _
r_ _
4

STEP 5: Tune the TV
Tune the'IV to theVCR viewing channel.The VCR viewing
channel is channel 3 or 4 or theTV's video input.
• If you connect yourVCR using the ANTENNA connectors
with RF antenna cable, set the 3CH.4 switch to channel 3 or
channel 4_the channel you want to use on yourTV.
• If you con0ect yourVCR using the AUDIO/VIDEO jacks with
audio/video cables, select theTV's video input to see the
signal. See the TV Owner's Manual.
STEP 6: Turn On the VCR
Press POWER to turn on theVCR.Turning on theVCR for the first
time starts the Interactive Setup feature.
STEP 7: Interactive Setup
The first time the VCR is turned on, Interactive Setup--a brief
series of on-screen menus--appears.These menus assist in
setting up several of the VCR's features. Use the remote's
number buttons to select options.
1. Press 1 for English, 2 for Espafiol (Spanish), or 3 for Frangais
(French).
Select aLanguage.
SeLeccione un idioma.
Choisissez une langue.
1>English
2Espafiot
3Francais
The remaining Interactive Setup menus will appear in the
language you choose. Follow the on-screen instructions to
complete the process. VCR Viewing Channel
5

STEP 8: Access the Menus
When you've completed Interactive Setup, try out the VCR's
regular on-screen menus.The MENU and number buttons let
you access, select, and change menu items. For example, to
change the Auto Play setting, you would do the following:
1. Press MENU to bring up the VCR MAIN MENU.
VCR RAIN RENU
1 VCR Plus+
2Timer Recordings
3 Time
4 Channels
5 Preferences
6Language
0 Exit
2. Press 5 to display the PREFERENCES menu.
PREFERENCES
1 Remote Control: VCR1
2 Auto Play: ON
3 Auto TV/VCR: ON
4EnergySaver: 2:00
5Tape Speed: SLP
0 Exit
3. Press 2to switch Auto Play to ON or OFE
PREFERENCES
1 Remote ControL: VCR1
2Auto Play: OFF
3Auto TV/VCR: ON
4EnergySaver: 2:00
5 Tape Speed: SLP
0Exit
See Setting Up the VCRfor detailed information about the
Auto Play feature. Once you understand how to use the
menus, move on to the next section.
6

Set-Up Features
Below is alist of features that you may want to set up
before you begin using yourVCR for the first time.
• Select a language
• Set upVCR channel list (Auto Channel Search)
• Set up for a cable box
• Set automatic daylight-saving time
•Set the time and date
•Set upVCR Plus+ channels
• Set the RemoteVCR1/VCR2 feature
• Set theAuto Play feature
•Set the Auto-I'VfCR feature
•Set the EnergySaver TM feature
•Setthe preferred tape speed
2V
SETTING UP THE VCR
V
V
V
¥
¥
7

Using the Menu to Set Up Features
You can change the setup of the VCR's features using the menu
system. Each feature isexplained in this section.
Language
Select your preferred language, and the on-screen displays will
appear in that language.
1. PressMENU to display the VCR MAIN MENU.
VCR RAIN MENU
1VCR PLus+
2 Timer Recordings
3Time
6 ChanneLs
S Preferences
6 Language
0Exit
2: Press 6 to select and display the LANGUAGE menu.
LANGUAGE
Select a Language.
1>English
2 EspanoL
3Francois
Press MENU to contiune
3. Select English, Espafiol (Spanish), or Frangais (French).
Cable Box Setup
This setup applies only when all channels are received through
the cable box. The VCR will automatically enter the output
channel of the cable box when programming your VCR for timer
recordings.
On-screen Menus 1
Not all theVCR screens are shown
in this manual when explaining the
features.
8

1. Press MENU to display the VCR MAIN MENU.
VCR RAIN MENU
1VCR Plus+
2 Timer Recordings
3Time
4Channels
5Preferences
6 Language
0Exit
2. Press4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3Signal Type: CABLE
4VCR PLus+ Channel List
5Cable Box Setup
0Exit
,Press 5 to display CABLE BOX SETURThen select one of the
three choices.
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channeLs or only SOME
channels.
1 ALL channels
Z Only SORE channels
3 Cancel setup
.If you select ALL CHANNELS, enter the output channel of
your cable box, usually 03, 04, or video line input and
press MENU.
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, 4. or Video)
04
Press CLEAR to correct
Press MENU to continue
CABLE BOX SETUP
The VCR will nou
receive all signals
from the cable box
on channel 04.
Press MENU to continue
Once you complete the setup, the VCR confirms that Cable
Box Setup is complete.
Cable Box Setup
ALL CHANNELS: enter two numbers
for output channel of your cable box
or press INPUT.
ONLY SOME CHANNELS: If you only
use the cable box to tune premium
channels.
CANCEL SETUP: select to cancel.
All Channels
If you do not use a cable box for ALL
channels, then you will want to use a
channel list (Auto Channel Search).
9

VCR Channels List
Your VCR may come with achannel list preset at the factory.
Even though yourVCR may come with a list, it's possible
that you may want to add or eliminate some channels
depending on whether they are active.
To Auto Channel Search
1. Press MENU to display theVCR MAIN MENU.
VCR RAIN RENU
1VCR PLus+
2Timer Recordings
3 Time
4 ChanneLs
5Preferences
6Language
0 Exit
2. Press 4 to display the CHANNELS menu.
CHANNELS
1Auto ChanneL Search
2Add/Remove ChanneLs
] Signal Type: CABLE
4VCR PLus+ Channel List
5CabLe Box Setup
0 Exit
3. Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL SEARCH
What type of signaL
are you using?
1 CabLe TV
2Antenna
3>Detect Automatically
0Cancel
,Select one of the three AUTO CHANNEL SEARCH
options.
Choices one and two are self-explanatory. If you choose
DETECT AUTOMATICALLY, the VCR automatically detects
which signal system you have attached to yourVCR.
Auto Channel Search
lO

AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for the available channels--this
takes about one to two minutes.The lowest channel is tuned
once the search is complete. Now, pressing CHANNEL up or
down should only select the active channels.
To Change the Signal Type
1. Press MENU to display theVCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 3 to change the SIGNALTYPE between CABLE and
ANTENNA.
To ADD or REMOVE Channels
You may want to add or remove channels after you AUTO
CHANNEL SEARCH,especially if some of the channels have weak
signals or you don't want to watch them.
1. Press MENU to display theVCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 2 to display the ADD/REMOVE CHANNELS screen. Use
CHANNEL up or down or number buttons to go to the
channels you want to remove or add.
ADD/REROVE CHANNELS
Channel 115
is presently ADDED
Press CLEAR to remove
Press NENU to exit
ADD/REROVE CHANNELS
Channel 115
is presently RENOVED
Press INFO to add
Press RENU to exit Selecting Channels
11

Time and Date
Before you set the time and date, set the AUTO DST (Daylight-
Saving Time) feature to ON or OFF for your area.
Set Daylight-Saving Time
1. Press MENU to display theVCR MAIN MENU.
VCR RAIN HENU
1VCR PLus+
2 Timer Recordings
3Time
4 Channels
5Preferences
6Language
0Exit
.Press 3 to display theTIME menu.
TIRE
1 Set Time and Date
2 Auto DST: ON
0 Exit
,Press 2 to turn AUTO DST: ON or OFE
Select ON if you want theVCR's clock to automatically adjust
for daylight-saving time.
Select OFF if you do not want the VCR's clock to adjust for
daylight-saving time.
Set the Time and Date
1. Press MENU to display the VCR MAIN MENU.
VCR RAIN RENU
1 VCR PLus+
2 Timer Recordings
3Time
4 Channels
5Preferences
6 Language
0Exit
Spring forward; Fall backward
In the Spring, daylight-saving time
begins on the first Sunday in April.
Because the clock automatically
changes from 2:00 AM to 3:00 AM
(forward one hour), remember to
include the extra hour for timer
recording falling within this
time frame.
In the Autumn, daylight-saving time
ends on the last Sunday in October.
The VCR clock automatically changes
from 2:00 AM to 1:00 AM (back one
hour).Therefore, it can affect your
recording length.
12

i
2. Press 3to display theTIME menu.
TIRE
1Set Time and Date
2Auto DST: ON
0Exit
3. Press 1 to display the SETTIME AND DATE screen,
SET TIRE AND DATE
T_me --:--
(hh:mm)
Date --I--I--
Press MENU to cancel
4. Enter the data using the number buttons. Press 0 before
single-digit numbers and follow the on-screen directions.
SET TIRE AND DATE
Time 12:34 PR
Date 10124/97 Friday
Press CLEAR to correct
Press MENU to set
VCR Plus+ Channels
Using VCR Plus+ can make programming timer recordings for
cable or off-air antenna easier, but you have to put in a little time
right now to set up a channel list. A worksheet and abbreviated
codes for typical cable services in the U.S. and Canada are
provided on the following pages.
1. Press MENU to display theVCR MAIN MENU.
VCR RAIN MENU
1VCR PLus+
2Timer Recordings
3 Time
4ChanneLs
5Preferences
6Languag e
0 Exit.
TimelDate Display
Pressing INFO on the remote
displays the time and date on the
screen.
VCR Plus+ Channel List
Refer to your local television list for
a completeVCR Plus+ channel list
for your viewing area or contact
your cable company. Using the list
may save you some time.
13

14
2. Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2Add/Remove ChanneLs
3Signal Type: CABLE
4VCR PLus+ ChanneL List
5CabLe Box Setup
0Exit
3. Press 4 to display the VCR PLUS+ CHANNEL LIST screen.
VCR+ Channel Ry Channel
5 --
4 --
3 -> -> -> --
2----
Use CH+/- to select
Press 0-9 to change
Press RENU to save
.Enter the data following the on-screen directions using your
worksheet.
VCR+ ChanneL Hy ChanneL
5 46
4----
3 -> -> -> 23
2--
1--
Use CH+/- to select
Press 0-9 to change
Press HENU to save
Screen is for an example only.
Two-DigitVCR Plus+ Channel _
Numbers for CableTV
(USA List)
35 American Movie Classics
39 Arts &-Entertainment
57 Black Entertainment
54 Bravo
42 Cable News Network
45 Cinemax
98 Cinemax 2
37 The Discovery Channel
53 The Disney Channel
63 Entertainment Television
34 ESPN Sports Network
47 The Family Channel
33 Home Box Office
95 Home Box Office 2
96 Home Box Office 3
51 The Learning Channel
46 Lifetime
58 The Movie Channel
48 MusicTelevision
49 The Nashville Network
38 Nickelodeon
64 NostalgiaTelevision
99 Quality Value Cable
41 Showtime
97 Showtime 2
59 Sports Channel
52 Turner Network Television
44 USA-Network
62 Video Hits I
93 Viewer's Choice I
94 Viewer's Choice 2
55 WGN Chicago
43 WTBS Atlanta
60 _OR-NewYork
See next page for Canadian List

VCR Plus+ Worksheet
Broadcast or VCR Plus+ Channel Channel Number
Cable-TV Station Number +" You Receive the
Name Station On*
HBO 33
ESPN 34
I,
, *Check your local or cable listing for the channel number you receive this station on.
**Check your local listing for broadcast orVCR Plus+ channel number assigned.
Two-DigitVCR Plus+ Channel
Numbers for CableTV
(Canadian List)
67 Allarcom PayTelevisionl
Superchannel
44 Arts & Entertainment
72 Cable News Network-Headline
News
61 Cable News Network
70 Canadian Home Shopping Network
56 Canal Famille
69 Cathay InternationaITelevision Inc
68 Chinavision Canada Corp
60 Country Music Television
63 Family Channel
62 First Choice
96 First ChoiceTwo
97 First Choice Three
99 First Choice Four
90 House of Commons
91 La Chalne Francalse
51 The Learning Channel
65 MeteoMedialTheWeather Network
48 MuchMusic Network
55 MusiquePlus
52 Nashville Network
73 Newsworld/CBC
53 Le Reseau des Sports
43 The Sports Network
64 Super Ecran
37 Super Ecran B
98 Super Ecran C
66 Telatino Network
46 TV5 Montreal
92 Viewer's Choice I
93 Viewer's Choice 2
94 Viewer's Choice 3
95 Viewer's Choice 4
71 V'rsionTV: Canada's Faith Network
38 YouthTV, Canada Inc,
15

Additional Set-Up Features in the
Preferences Menu
The features in this section are all accessed through the
PREFERENCESmenu.
1. Press MENU to displaytheVCR MAIN MENU.
VCR RAIN RENU
1 VCR PLus+
2Timer Recordings
3Time
4Channels
5 Preferences
6Language
0 Exit
2. Press 5 to display the PREFERENCES menu.
PREFERENCES
1 Remote Control: VCR1
2 Auto Play: ON
3Auto TV/VCR: ON
4EnergySaver: 2:00
5 Tape Speed: SLP
0 Exit
Now you are ready to select an item from the menu to set up.
Remote VCR1/VCR2 Option
If you own a compatible RCA, GE, or ProScan remote that has a
VCR2, VCR2mLD,or DVDeVCR2 button, this feature allows you to
set this VCR to respond to that button.
Press 1to select the REMOTE CONTROL item. Then press the
VCR2, VCR2mLD,or DVDeVCR2 button to change.
PREFERENCES
1 Remote Control: VCR1
2 Auto PLay: ON
3Auto TV/VCR: ON
4 EnergySaver: 2:00
5 Tape Speed: SLP
0Exit
PREFERENCES
1Remote Control: VCR2
2 Auto PLay: ON
3 Auto TV/VCR: ON
4EnergySaver: 2:00
5Tape Speed: SLP
0Exit
16

The VCR will only respond to the compatible remote's VCR2,
VCR2-LD, or DVD*VCR2 button. If you change the remote setting
to VCR2, the remote that came with your VCR will no longer
control it.
To change the remote setting back to VCR1, display the
PREFERENCESmenu, press 1, and then press VCR1 on your
compatible remote.
Auto Play
This feature allows theVCR to automatically start playing when
you insert a tape with the safety tab removed. Press 2 to switch
between ON or OFF.
Select ON if you want a tape with its safety tab removed to
start playing automatically when the tape is inserted.
Select OFF if you do notwant a tape with its safety tab
removed to start playing automatically.
Auto TV/VCR
This feature controlswhether theTVNCR switch changes
automatically to the VCR mode when the VCR is turned on. Press
3 to switch between ON and OFE
•Select ON if you want the VCR to switch to the VCR mode
when theVCR is turned on or a cassette is inserted. This
only applies if you connect the IN FROM ANT. and OUTTO TV
jacks of your VCR andTV and watch your VCR on channel 3 or
4 ofyourTV.
•Select OFF if you want the VCR to remain in theTV mode.
This is useful if you watch yourVCR on theTV's video input
and you don't want your antenna/cable signal interrupted by
the VCR.
TV/VCR Button
PressingTV,VCR on the remote
will still switch between the VCR
andTV mode.
VCR mode:VCR indicator in the
display panel lights.
TV mode: VCR indicator turns off.
17

EnergySaverTM
By default, this VCR automatically turns off after two hours of
inactivity. Press4 to change the time delay, or to disable the
feature.
OFF: The VCR will remain turned on until you shut it off.
1:00, 2:00, or 3:00:TheVCR turns off after one, two, or three
hours of inactivity.
Thirty seconds before shutting off, theVCR will warn you with a
screen reading, "The VCR will turn off in 30 seconds. Press any
key to cancel."
If you use the VCR's tuner instead of yourTV to tune channels,
you may want to turn this feature off.
Tape Speed
You can select a preferred tape speed for recording.The speed
you select appears in the timer and VCR Plus+ recording menus.
The default factory setting is SLR Press 5 to switch between SP
and SLR
When making a recording, you can override the preferred tape
speed.
•Press the SPEED button on the remote.
• Set the tape speed in the timer or VCR Plus+ recording
menu.
When you turn off the VCR, the tape speed reverts to the one
you have selected.
Tape Speeds
SP (Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape. Special effects such as
pause, slow motion, picture search,
and frame advance work well when
you play back tapes recorded in this
speed.
LP (Long Play)
Your VCR is capable of playing back
tapes recorded in LRYou cannot
record in the LP speed.
SLP (Super Long Play)
Gives three times the recording time
of tapes recorded in SR Special
effects such as pause, slow motion,
picture search, and frame advance
work well when you play back tapes
recorded in this speed.
Cassette
T-120
T-160
Recording Time
SP SLP
2Hr 6Hr
2Hr 8Hr
40Min
18