GE Monogram ZVC30LSS User manual

Owner's
Manual
30", :36"ond 48"
Custom Hood Insert
ZVC3OLSS
ZVC36LSS
ZVC48LSS
monogram.com
Monogram_

Consumer Information
Custom Hood Insert
Contents Consumer Information
Important Phone Numbers ................... 13
Instructions de S_curit_ ....................... 5
Model and Serial Numbers ..................... 2
Problem Solver ................................ 9
Product Registration ...................... 15,16
Safety Instructions ............................ 4
Warranty .................................... 14
Controls and Features ........................ 6
Care and Cleaning
Light Bulbs .................................... 8
Metal Grease Filters ........................... 7
Stainless Steel Hood Surfaces .................. 8
Before
using your
custom
hood
insert
Readthis manual carefully. It isintended to help
you operate and maintain your new custom hood
insert properly.
Keep it handy for answers to your questions.
If you don't understand something or need more
help, there is a list of toll-free consumer service
numbers included in the back section of this
manual.
OR
Visit our Website at: monogram.cam
Write
down the
model &
serial
numbers
You'llfind them on a label on the hood.
These numbers are also on the Consumer Product
Ownership Registration Cardpacked separately
with your hood.
Visit monogram.com and click on "RegisterYour
Appliance" to register your custom hood insert.
Before sending in this card, please write these
numbers here:
Hodel Number
Serial Number
Use these numbers in any correspondence or
service calls concerning your hood.
If blou
received a
damaged
hood
Immediately contact the dealer (or builder) that
sold you the hood.

Consumer Information
Custom Hood Insert
Save time
&money Before you request service, check the Problem
Solverin the back of this manual. It lists causesof minor operating problems that
you can correct yourself.
If gou
need
service
To obtain service, see the Consumer Servicespage
in the back of this manual.
We're proud of our service and want you to be
pleased. Iffor some reason you are not happy with
the service you receive,here are some stepsto
follow for further help.
FIRST,contact the people who serviced your
appliance. Explainwhy you are not pleased.
In most cases,this will solve the problem.
NEXT,if you are still not pleased, write all the
details-including your phone number-to:
Manager, Customer Relations
GEAppliances
Appliance Park
Louisville,KY40225

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
SAFETY PRECAUTIONS
WARNING-To REDUCETHE RISKOF
FIRE,ELECTRICSHOCKOR iNJURY TO PERSONS,
OBSERVETHE FOLLOWING:
A. Use this unit onlg in the manner intended
bg the manufacturer. If gou have questions,
contact the manufacturec
B. Before servicing or cleaning unit, switch
power off at service panel and lock the service
disconnecting means to prevent power from
being switched on accidentallg. When the
service disconnecting means cannot be
locked, securelg fasten a prominent warning
device, such as a tag, to the service panel.
C. Do not use this unit with ang solid-state speed
control device.
D. This unit must be grounded.
CAUTION-FoR GENERAL VENTILATING
USE ONLY. DO NOT USETO EXHAUST
HAZARDOUS OR EXPLOSIVE MATERIALS AND
VAPORS.
_'_1% |_I | |_ _--TO REDUCE THE RISK OF
INJURY TO PERSONS IN THE EVENT OF A RANGE
TOP GREASE FIRE, OBSERVE THE FOLLOWING*:
A. SMOTHER FLAMES with a close-fitting lid,
cookie sheet or metal trag, then turn off the
burner. BE CAREFUL TO PREVENT BURNS. If the
flames do not go out immediatel U, EVACUATE
AND CALL THE FIRE DEPARTMENT.
B. NEVERPICKUPA FLAMINGPAN-You mag be
burned.
C. DO NOTUSEWATER,including wet dishcloths
or towels-a violent steam explosion will
result.
D. Use an extinguisher ONLYif:
1. You know you have a ClassABC
extinguisher, and gou alreadg know
how to operate it.
2. The fire is small and contained in the
area where it started.
3. The fire department is being called.
4. You can fight the fire with gour back
to an exit.
*Based on "Kitchen Firesafetq Tips" published bg
NFPA.
READ AND SAVE
THESE INSTRUCTIONS.
_At_klmk|_
VV_I% l_l | |_I T_,_--TO REDUCE THE RISK OF A
RANGE TOP GREASE FIRE:
A. Never leave surface units unattended at high
settings. Boilovers cause smoking and greasg
spillovers that may ignite. Heat oils slowly on
low or medium settings.
B. Always turn hood ONwhen cooking at high
heat or when flamb6ing food (i.e.Crepes
Suzette, Cherries Jubilee, Peppercorn Beef
Flamb6).
C. Clean ventilating fans frequently. Grease
should not be allowed to accumulate on
fan or filter.
D. Use proper pan size. Always use cookware
appropriate for the size of the surface
element.
WARNING-To REDUCETHE RISKOF
FIRE,ELECTRICSHOCKORINJURYTO PERSONS,
OBSERVETHE FOLLOWING:
A. Installation work and electrical wiring must be
done by qualified person(s)in accordance with
all applicable codes and standards, including
fire-related construction.
B. Sufficient air is needed for proper combustion
and exhausting of gases through the flue
(chimney) of fuel burning equipment to
prevent back drafting. Follow the heating
equipment manufacturer's guidelines and
safetg standards such as those published by
the National Fire Protection Association (NFPA),
and the American Society for Heating,
Refrigeration and Air Conditioning Engineers
(ASHRAE),and the local code authorities.
C. When cutting or drilling into wall or ceiling, do
not damage electrical wiring and other hidden
utilities.
D. Ducted fans must always be vented to the
outdoors.
WARN ING-To REDUCETHE RISKOF
FIRE,USEONLYMETAL DUCTWORK.
" DOnot attempt to repair or replace any
part of your hood unless it is specifically
recommended in this manual. All other
servicing should be referred to a qualified
technician.
CAUTION--AUTOMATICALLYOPERATED
DEVICE.TO REDUCETHE RISKOF INJURY,
DISCONNECTFROMPOWERSUPPLYBEFORE
SERVIaNGoTHE UNIT IS EQUIPPEDWITH AN
INTEGRALDISCONNECTINGSWITCHLOCATED
INSIDE THE BLOWERHOUSING.

INSTRUCTIONS DE SI_CURITI_IMPORTANTES
LISEZ TOUTES LES INSTRUCTIONS AVANT D'UTILISER VOTRE APPAREIL
PRECAUTIONS EN MATIERE DE SECURITE
AVERTISSEMENT:
POUR REDUIRE LE RISQUE D'INCENDIE,
DE SECOUSSE ELECTRIQUE OU DE BLESSURE
CORPORELLE, OBSERVEZ LES PRECAUTIONS
SUIVANTES :
A. N'utilisez cet appareil que de la maniere pr6vue
par le fabricant. Si vous avez des questions, appelez
le fabricant.
B. Avant de r@arer ou de nettoger votre appareil,
d_branchez le courant au niveau du panneau
de service et verrouillez les m_canismes de
d_branchement de service pour @iter tout
branchement accidentel au courant. Si vous ne pouvez
pas verrouiller les m6canismes de dGbranchement de
service, attachez soigneusement un avertissement bien
visible, comme une Gtiquette, au panneau de service.
C. N'utilisezjamais cet appareil avec un m_canisme
de r_glage de la vitesse 6 semi-conducteurs.
D. Cet uppareil doit _tre bien mis 6 lu terre.
ATTENTION : U,IQUEME,TAUSAGE
DEVE.TILATIO.OE.UALE..'UT.ISEZJAMAIS
POUR L'ECHAPPEMENTDE MATIERESETDE
VAPEURS EXPLOSIVES.
AVERTISSEMENT :PourREDUIRE
LE RISQUE DE BLESSURE CORPORELLE SIDE LA
GRAISSE PREND FEU SUR LA SURFACE DE CUISSON
DU FOUR, SUIVEZ LES INSTRUCTIONS SUIVANTES* :
A. ETOUFFEZLES FLAHIVlES avec un couvercle qui
convient, une t61e 6 biscuits ou un plateau en m6tal,
puis _teignez le brOleun FAITES BIEN ATTENTION DE NE
PASVOUS BROLER.Si les flammes ne s'_teignent pas
imm_diatement, SORTEZ ETAPPELEZ LES POHPIERS.
B. NE DEPLACEZ JAHAIS UNE CASSEROLLEQUI FLAHBE--
Vous pouvez vous brOler.
C N'UTILISEZ JAIVlAIS D'EAU,en particulier de serviette ou
de chiffon mouill_-il se produira une explosion violente
de vapeur brOlante.
D. N'UTILISEZ UN EXTINCTEURque si:
1.Vous avez un extincteur de classe ABC et vous savez
comment I'utiliser;
2. Le feu est r6duit et confin_ 6 I'endroit o0 il a
commence;
3. Vous avez d_j6 appel6 les pompiers;
4. Vous combattez les flammes en toumant le dos 6
une sortie.
* Bas6 sur I'ouvrage intitul_ <<Kitchen Fire Safetg Tips>>
publi_ par la NFPA.
LISEZ ET CONSERVEZ
CES INSTRUCTIONS.
AVERTISSEMENT : REDU'SEZ'E
RISQUE D'UN FEU DE GRAISSE SUR LA SURFACE
DE CUISSON DU FOUR :
A. Ne laissez jamais sans surveillance les unit_s de cuisson
de surface 6 une temp@ature @[e-mail] bouillonnement
occasionne des d6bordements fumants et graisseux qui
peuvent prendre feu. Chauffez 6 feu doux les substances
huileuses, avec un r@glage bas ou mouen.
B. Ne pr@arez pas des mets flamb@s sur la cuisini@re.
Si vous pr@arez des mets flamb6s sous la hotte, mettez
le ventilateur en marche.
C. Nettogez les m_canismes de ventilation fr_quemment.
IIne faut pas permettre une accumulation de graisse sur
le ventilateur ou sur le filtre.
D. Utilisez une casserole de bonne taille. Utilisez toujours
un ustensile de cuisine qui convienne au diam@tre de
1'@16mentde cuisson.
AVERTISSEMENT: POURREDUIRE
LE RISQUE D'INCENDIE, DE SECOUSSE ELECTRIQUE
OU DE BLESSURE CORPORELLE, OBSERVEZ LES
PRECAUTIONS SUIVANTES :
A. Vous devez faire ex6cuter tousles travaux d'installation
et de c@blage @lectrique par une personne qualifi@,
conform@ment 6 tousles codes et les normes en
vigueur, en particulier ceux de construction relatifs
aux incendies.
B. Vous devez assez d'air pour avoir une bonne combustion
et permettre I'@acuation des gaz par le conduit de
chemin@ du mat@iel de combustion du carburant, afin
d'@iter tout retour d'ak Suivez les directives du fabricant
de mat@iel de combustion et les normes de s@curit6
comme celles publi@es par la National Fire Protection
Association (NFPA)et I'American Societg for Heating,
Refrigeration and Air Conditioning Engineers (ASHRAE),
ainsi que les modalit_s des codes Iocaux.
C. Si vous faites un trou ou une ouverture dans un mur ou
un plafond, n'endommagez pas les fils @lectriques et les
autres installations cach@es de service public.
D. Vous devez toujours alimenter les ventilateurs dans les
conduits en air en provenance de I'ext@ieur.
AVERTISSEMENT:POURREDUIRE
LE RISQUE D'INCENDIE, N'UTILISEZ QUE DES
co,Du,TsE,METAL.
N'essagezjamais de remplacer ou de r@arer un
@l@mentde votre hotte si le pr@sent manuel ne le
[e-mail]
dolt 8tre effectu@ par un technicien qualifi&]
ATTENTION : APPAREILCOMMANDE
AUTOMATIQUEMENT. AFIN DE REDUIRE LES
RISQUES DE BLESSURE,DEBRANCHEZ
L'APPAREIL DE L'ALIMENTATION ELECTRIQUE
AVANT DE PROCEDER/_ UNE REPARATION.
L'APPAREIL EST EgUIPE D'UN SECTIONNEUR
INTEGRAL SITUE A L'INTERIEUR DU LOGEMENT
DU VENTILATEUR.

Controls and Features
Custom Hood Insert
Controls NOTE: Avoid using food products that produce
flames under the range hood.
1 FAN DECREASE ON/OFR Press to turn on and
decrease fan settings. It remembers the last
fan level used. The buttons allow gou to cgcle
around to the desired setting. (Use to set the fan
speed to LOW, MED, HIGH, BOOSTor OFR)
2 FAN INCREASE ON/OFR Press to turn on and
increase fan settings. It remembers the last
fan level used. The buttons allow gou to cgcle
around to the desired setting. (Use to set the fan
speed to LOW, MED, HIGH, BOOSTor OFR)
SENSOR FEATURE--The hood fan will
automaticallg turn on at the MED setting if
cooking temperatures become too hot. The fan
will stag on for a minimum of 3 minutes and will
then turn off when temperatures cool to an
appropriate level.
3 LIGHT DECREASE ONIOFF. Press to turn on
and dim the lights. It remembers the last light
level used. The buttons allow gou to cgcle
around to the desired setting. {There are four
light levels/settings and OFR)
4 LIGHT INCREASE ON/OFF. Press to turn on
and brighten the lights. It remembers the last
light level used. The buttons allow gou to cgcle
around to the desired setting. {There are four
light levels/settings and OFR)
5 POWER ON/OFF. Press to activate {turn
on)/deactivate {turn off) the control buttons.
When the buttons are active {turned on), their
outer rings will be illuminated. When active
{turned on), the hood lights and fan will
automaticallg turn on at their last settings.
NOTES:
• Alwags deactivate {turn off) the buttons when
the hood is not in use.
• If both the LIGHT and FAN are setto OFF,the
buttons will automaticallg deactivate {turn off)
after 10 seconds.
Monogram°
FAN LIGHT
O
1 2 3 4 5

Careand Cleaning
Custom Hood Insert
For gout
safetug Before servicing or cleaning the unit, switch
power off at the service panel and lock the service
panel to prevent power from being switched on
accidentallg. If the service panel cannot be locked,
fasten a tag or prominent warning label to the
panel.
Metal
grease
filters
The metal filters trap grease released bg foods
on the cooktop. The filters also help prevent flames
(from food, grease)from damaging the inside of the
hood.
For this reason, the filters must ALWAYS be in place
when the hood is used. The grease filters should be
cleaned everg 6 months, or as needed.
To remove:
Support the filter with one hand while pulling down
filter clip with the othen Pullthe filter down and out.
To replace:
1.Tip the filter into the back tab slotsand lift up.
2.While maintaining slight upward pressure on
filter, open clip and press into place with two
hands.
To clean, swish the filter in hot soapg water and
rinse in clean water or wash it in the dishwasher.
Do not use abrasive cleansers.
ooooo

Careand Cleaning
Custom Hood Insert
Stainless
steel hood
surfaces
Do not use a steel woolpad; it will scratch
the surface.
To clean the stainless steel surface, usewarm
sudsy water or a stainless steel cleaner or polish.
Always wipe the surface in the direction of the
grain. Follow the cleaner instructions for cleaning
the stainless steel surface.
Toinquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest you, pleasecall our toll-free
number:
National Parts Center 800.626.2002
monogram.corn
Light bulbs To change the light bulbs:
1. Graspthe outer trim ring and twist until reaching
the unlock position.Then pull the ring straight out.
2. Graspthe bulb and twist until reaching the unlock
position.Then gently pull the bulb straight out.
3. Replacewith the same wattage, type and size
bulb.Wear gloves. Do not touch bulb with your
bare fingers.
These 120 volt, 50 watt halogen bulbs with a
GU10base are available at specialty lighting
stores and home building centers.
4. Replacethe outer trim ring by inserting the two
retaining tabs into the two tab slots,pressing the
ring flush with the surface of the hood insert and
twisting until reaching the lock position.

Questions?
Use this
problem
solver!
The Problem Solver
Custom Hood Insert
PROBLEM POSSIBLE CAUSE
FAN AUTOMATICALLY , The Sensor feature will automaticall Uturn the fan on at the
TURNS ON AND CAN MED setting if cooking temperatures become too hot. The fan
NOT BETURNED OFF will sta Uon for a minimum of 3minutes and will then turn off when
temperatures cool to on appropriate level.
FAN DOES NOT , A fuse ma U be blown or a circuit breaker tripped. Replace fuse or
OPERATE WHEN reset circuit breaker.
TURNED ON , The power disconnect switch inside the hood ma U be switched off.
Remove the metal grease filters and flip the switch on.
FAN FAILS TO CIRCULATE , Check to be sure the metal grease filters are clean. Clean the metal
AIR OR MOVES AIR grease filters (see the Metal grease filters section). If cleaning
SLOWER THAN NORMAL the filters does not correct the problem, call for service.
FAN KEEPSGOING , The motor is probabl U overheating and turning itself off. This can
OFF AND ON be harmful to the moton Check to be sure the filters are clean. If off
and on cucling continues, call for service.
LIGHT WILL NOT STAY o Use 120 volt, 50 watt halogen bulbs with a GU!O base and make sure
ON HIGH SETTING they are inserted securel U. See the Light bulbs section.
THE HOOD CONTROLS o Disconnect power to the hood bU removing the fuse or turning the
ARE NOT OPERATING circuit breaker off in the home fuse box. Wait 30 seconds to allow the
CORRECTLY hood controls to reset and then replace the fuse or move the circuit
breaker back on.
It is normal for the light and fan buttons to cgcle around through the
settings so that Uou can easil U set the controls to the desired setting.
SEQUENTIAL PRESSES
OFTHE LIGHT OR FAN
BUTTONS WILL
SOMETIMES CHANGE
THE SETTING FROM THE
LOWEST SETTING-TO OFF-
TO THE HIGHEST SETTING,
OR FROM THE HIGHEST
SETTING-TO OFF-TO THE
LOWEST SETTING
WHEN PRESSING THE
POWER ON/OFF BUTTON
TO TURN ON THE LIGHT,
THE FAN COMES ON
INSTEAD
For uour convenience, it is normal for the lights and fan to remember
their last setting when Uou press the Power On/Off button. If Uou
want onlu the lights on, press the "FAN+" (or the "FAN-" ) button until
the fan is off. When Uou power the hood up next time, onlu the lights
will function.

Notes
Custom Hood Insert
!0

Notes
Custom Hood Insert
!!

Notes
Custom Hood Insert
!2

Consumer Services
Custom Hood Insert
With the purchase of your new Monogram appliance,
receive the assurance that if you ever need information or
assistance from GE, we'll be there. All you have to do is call--
toll-free!
GE Answer
Center ®
800.626.2000
Whatever gour question about ang Monogram major appliance, GEAnswer Center®information
service is available to help. Your call-and gour question-will be answered promptlg and
courteouslg. And gou can call ang time. GEAnswer Center¢ service is open 24 hours a dag,
7 dags a week.
OR
Visit our Website at: monogram.cam
Monogram
Preferred
Service
800.444.1845
AGE consumer service professional will provide expert repair service, scheduled at a time that's
convenient for gou. Hang GEConsumer Service compang-operated locations offer gou service
todag or tomorrow, or at gour convenience (8:00 a.m. to 8:00 p.m.weekdags, 9:00 a.m. to 4:00
p.m. Saturdags). Our factorg-trained technicians know gour appliance inside and out-so most
repairs can be handled in just one visit.
For Customers
With Special
Needs...
800.626.2000
_ [ 7F/ ......
s_loN
GE offers, free of charge, a brochure to assist in planning a barrier-free
kitchen for persons with limited mobilitg.
Consumers with impaired hearing or speech who have access to a TDD
or a conventional teletgpewriter mag call 800.TDD.GEAC (800.833.4322)
to request information or service.
Service
Contracts
800.626.2224
You can have the secure feeling that GEConsumer Service will still be there after gour
warrantg expires. Purchase a GEcontract while gour warrantg isstill in effect and gou'll receive
a substantial discount. With a multiple-gear contract, gou're assured of future service at
todag's prices.
Parts and
Accessories
800.626.2002
Individuals qualified to service their own appliances can have parts or accessories sent directlg
to their home. The GE parts sgstem provides access to over 47,000 parts._and all GE Genuine
Renewal Parts are fullg warranted. VISA, MasterCard and Discover cards are accepted.
User maintenance instructions contained in this manual cover procedures intended to be
performed bg ang user. Other servicing generallg should be referred to qualified service
personnel. Caution must be exercised, since improper servicing mag cause unsafe operation.
13

Warranty
Custom Hood Insert
YOUR MONOGRAM HOOD WARRANTY
Staple sales slip or cancelled check here. Proof of original
purchase date is needed to obtain service under warranty.
WHAT IS
COVERED LIMITED ONE-YEAR WARRANTY
For one year from date of original purchase, we will provide, free of charge, parts and
service labor in your home to repair or replace any part of the hood that fails because
of a manufacturing defect.
This warranty is extended to the original purchaser and any succeeding owner for products
purchased for ordinary home use in the 48 mainland states, Hawaii and Washington, D.C.
If the product is located in an area where service by a GEAuthorized Servicer is not available,
you may be responsible for a trip charge or you may be required to bring the product to an
Authorized GEService Location for service. InAlaska the warranty isthe same except that it
is LIMITEDbecause you must pay to ship the product to the service shop or for the service
technician's travel costs to your home.
All warranty service will be provided by our Factory Service Centers or by our authorized
Customer Care®servicers during normal working hours.
Should your appliance need service, during warranty period or beyond, call 800.444.1845.
Please have your serial number and model number available when calling for service.
WHAT IS NOT
COVERED • Service trips to gour home to teach gou
how to use the product.
• Replacement of house fuses or resetting
of circuit breakers.
• Incidental or consequential damage
caused bg possible defects with this
appliance.
• Replacement of the replaceable filters.
• Damage to the product caused bg
accident, fire, floods or acts of God.
• Damage caused after deliverg.
• Failure of the product if it is used for
other than its intended purpose or used
commercially.
• Improper installation.
If you have an installation problem,
contact gour dealer or installer. You are
responsible for providing adequate
electrical, gas, exhausting and other
connecting facilities as described in the
Installation Instructions provided with
the product.
• Product not accessible to provide required
service.
EXCLUSIONOFIMPLIED WARRANTIES--Yoursole and exclusive remedy is product repair
as provided in this Limited Warranty. Any implied warranties, including the implied
warranties of merchantability or fitness for uparticular purpose, ore limited to one
year or the shortest period allowed by law.
14
Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
To know what your legal rights are in your state, consult your local or state consumer affairs
office or your state's Attorneg General.
Warrantor: General Electric Company. Louisville, KY40225

I_opoi l!OH:[UD:[JOdLUJ
UO!:iOJ:iS!6e_l d]LISJOUM0
3,3npoJd JeLUnSUO_
saouD!lddV _,79
IIIII Ploce
1st Closs
Letter
Stomp
Here
General Electric Company
Warrantg Registration Department
P.O.Box 32150
Louisville, KY40232-2150
15

Consumer Product Ownership Registration
Dear Customer:
Thank you for purchasing our product and thank you for placing your confidence in us. We are proud to
have you as a customer!
Follow these three steps to protect your new appliance investment:
Complete and mail
your Consumer
Product Ownership
Registration today.
Have the peace of mind
of knowing we can
contact you in the
unlikely event of a
safety modification.
After completing this
registration, write your
model and serial numbers
in this manual. You will
need this information
should you require service.
Our service number
is 800.444.1845.
Read your Owner's
Manual carefully. It will
help you operate your
new appliance properly.
Important: To ensure that your product is registered, mail the separate product registration card.
If the separate product registration card is missing, fold and mail the form below. No envelope is needed.
FOLD HERE
Consumer Product Ownership Registration
Product Model Serial
Hood
Hr. [] Ms. [] Hrs. [] Hiss []
FirstI ILastI I
Name IIIIIIIII Name IIIIIIIIIIIIII
StreetI I
Address IIIIIIIIIIIIIIIIIIIIIIIIII
I
Apt. # I I I
City Ii i
DatePlaced
InUse I I
Month
,,,,, I E-mai,Address*l,,,,,,,,,,,,,, I
iiiiiiiiiiiiii State I_ Code I III
DayL_ Year LI_
GE Consumer & Industrial
Appliances
General Electric Company
Louisville, KY40225
monogram cam
Ph°nel, , I-I , , II , , , I
Number
* Please provide your e-moil address to receive, via e-mail, discounts, special offers and other important
communications from GE Appliances (GEA)
Check here if you do not want to receive communications from GEA's carefully selected partners
FAILURETOCOHPLETEAND RETURNTHIS CARD DOESNOT DIMINISH YOURWARRANTYRIGHTS
For more information about GEA's privacy and data usage policy, go to monogram cam and click on "Privacy
Policy" or call 8006262224
TAPE CLOSED
GE Consumer & Industrial
Appliances
General Electric Company
Louisville, KY40225
monogram cam
49-80425 I
12-06 JR
Printed in Italy