Gebesa PRIME User manual

PRIME
RETURN WITH FULL MODESTY PANEL
ASSEMBLY MANUAL
COD: GBR615090L
Questions?
Call Toll Free 1-844-2GEBESA or email [email protected]

PARTS
2
ASCEND | “L” SHAPE
(A)
WORKSURFACE
1x
(B)
LATERAL RECESSED
PANEL
1x
(C)
FULL MODESTY
PANEL
1x
PRIME DESK

ASCEND | “L” SHAPE SCREWS
3
PRIME DESK
(D)
MINIFIX TITUS
(E)
MINIFIX BOLT
(F)
MINIFIX CAP
6x 6x 6x
REQUIRED ASSEMBLY TOOLS NOT INCLUDED
(H)
FLAT BRACKET
2x
(I)
#8x5/8” WOOD SCREW
(G)
ADJUSTABLE LEVELER
(J)
#8x1 1/2” WOOD SCREW
2x
2x12x

STEPS
4
ASCEND | “L” SHAPE
1. Set leveler (G) to the lateral recessed panel (B)
PRIME DESK

STEPS
5
ASCEND | “L” SHAPE
2. Attach the base foot (B) to the full modesty panel (C) by using the minifix
PRIME DESK
BARREL
BOL T
INSER T
MINIFIX
3
21
BARREL
BOL T
INSER T
MINIFIX UNION
3
21

UNION
STEPS
6
ASCEND | “L” SHAPE
3. Place the worksurface (A) on the previously installed base support and
fasten by using the minifix
PRIME DESK
BARREL
BOL T
INSER T
MINIFIX
3
21
BARREL
BOL T
INSER T
MINIFIX UNION
3
21

UNION
STEPS
7
ASCEND | “L” SHAPE
4. Verify structure and assembly integrity
PRIME DESK

STEPS
8
ASCEND | “L” SHAPE
5. Add the flat bracket (H) to the worksurface (A) using wood screws (I) as
is shown in the image
PRIME DESK
6. Move the return to the desk that you will join as is shown on
the image. Desk is not included

STEPS
9
ASCEND | “L” SHAPE
7. Secure the return to the desk using wood screws
PRIME DESK
(I)
(J)
”

STEPS
10
ASCEND | “L” SHAPE
8. Check Stability and adjust the levelers, and place the mini fix caps (F)
on top of the minifix once you finished the assembly
PRIME DESK