Gefen CAT5-9000HD-NI User manual

CAT5 • 9000HD-NI
USER MANUAL
www.gefen.com

Technical Support:
Telephone [phone]
[phone]
Fax [phone]
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff Street
Chatsworth, CA 91311
www.gefen.com
[email protected]
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
CAT5•9000HD-NI is a trademark of Gefen Inc.
© 2006 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE

TABLE OF CONTENTS
INTRODUCTION
OPERATION NOTES
CAT5•9000HD FRONT PANEL DESCRIPTIONS
CAT5•9000HDS BACK PANEL LAYOUT
CAT5•9000HDS BACK PANEL DESCRIPTIONS
CAT5•9000HDR BACK PANEL LAYOUT
CAT5•9000HDR BACK PANEL DESCRIPTIONS
CAT5 WIRING DIAGRAM
WIRING DIAGRAM
SPECIFICATIONS
WARRANTY
1
2
3
4
5
6
7
8
9
10
11

Thank you for purchasing the new ex•tend•it CAT5•9000HD series by Gefen, Inc.
The ex•tend•it CAT5•9000HD by Gefen allows users the benefits of extending DVI, PS/
2, RS232, and audio signals beyond the desktop. In a growing number of applications,
broadcast stations and production facilities there is a need to locate a computer remotely
from the keyboard, mouse, and video monitor. A CPU may need to be shared between
several users, for example, or moved to another room because of annoying fan noise.
The CAT5•9000HD series can be used to extend computers with noisy fans, printers, and
harddrives.Withthe potentialto coverthe distanceof 150feet, industrystandard Category
5 (CAT-5) cables are used for the extension of all the devices. One can connect additional
CAT5•9000HD series to the same computer, allowing access to the same computer from
other locations up to 150 feet apart.
CONTENTS
The CAT5•9000HD system consists of:
(1) CAT5•9000HDS sender unit
(1) CAT5•9000HDR receiver unit
(2) 5VDC power supply
(1) DVI to HDMI cable (6FT)
(2) PS/2 cable (6FT)
(1) Audio cables (6FT)
(1) User Manual
HOW IT WORKS
In its most basic application, the CAT5•9000HDS sender unit resides next to the com-
puter. Supplied with the system, DVI, PS/2, and audio cables connect the computer to the
CAT5•9000HDS sender unit.
The CAT5•9000HDR receiver unit are placed next to the monitors and keyboard, mouse,
speakers, and RS232 devices, at the remote location. The monitor, keyboard, mouse, and
other devices are connected to the CAT5•9000HDR similar to the way they are connected
to the back of the computer (PC or Macintosh).
INTRODUCTION
1

READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE CAT5•9000HD SYSTEM
• Use industry standard Category-5 (CAT-5) cable to operate the CAT5•9000HD system.
CAT-5 E cable is preferred.
• Two CAT-5 cables are required to extend each DVI or HDMI Video signal
• Please connect all the cables between the computer and the CAT5•9000HDS before
power up the CAT5•9000HDS unit.
• The CAT5•9000HD units are housed in a metal box for better RF shielding.
OPERATION NOTES
2

Front Panel Function Description
1
POWER ON INDICATOR - Indicates that the unit is plugged in and powered on
1
CAT5•9000HDS FRONT PANEL DESCRIPTIONS
3
1
Front Panel Function Description
POWER ON INDICATOR - Indicates that the unit is plugged in and powered on
1
CAT5•9000HDR FRONT PANEL DESCRIPTIONS

CAT5•9000HDS BACK PANEL LAYOUT
1 2 3 4 5
6 7 8 910 11
4
12

CAT5•9000HDS BACK PANEL DESCRIPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
5
POWER - 5 VDC external power supply
HDMI in 1 - HDMI Input connects to your computer with the supplied DVI to HDMI cable
CAT5 Video 1 - RJ-45 input extends HDMI input 1 with CAT-5 cable
CAT5 USB/DDC1 - RJ-45 input extends USB and DDC1 signals with CAT-5 cable
USB IN - Not Used
KEYBOARD - Mini din PS/2 connector connects to PC for keyboard controls
MOUSE - Mini din PS/2 connector connects to PC for mouse controls
CAT-5 AUD - RJ-45 input extends audio out and audio 2 with CAT-5 cable
CAT-5 SERIAL/PS-2- RJ-45 input extends RS232, and PS/2 keyboard and mouse
with CAT-5 cable
RS232 - DB-9 input from computer
AUDIO OUT 2 - Audio Mini Jack input from computer
AUDIO IN - Audio Mini Jack input from computer

1 2 345
678910 11
CAT5•9000HDR BACK PANEL LAYOUT
6
12
0
0
C

1
2
3
4
5
6
7
8
9
10
11
12
CAT5•9000HDR BACK PANEL DESCRIPTIONS
7
POWER - 5 VDC external power supply
CAT5 USB/DDC1 - RJ-45 input extends USB and DDC1 signals with CAT-5 cable
CAT5 Video 1 - RJ-45 input extends video input 1 with CAT-5 cable
DVI OUT 1 - DVI output connects to the monitor 1 for local video
USB Out - Not Used
KEYBOARD - PS/2 output connects to the keyboard
MOUSE - PS/2 output connects to the mouse
CAT-5 AUDIO - RJ-45 input connects CAT-5 cable to receive extended audio in and
audio 2 signals
CAT-5 SERIAL PS/2 - RJ-45 input connects CAT-5 cable to receive extended
RS-232 and PS/2 signals
RS232 - DB-9 connector connects to RS-232 devices
AUDIO IN - Audio mini jack connects to microphone
AUDIO OUT - Audio mini jack connects to speakers