Gefen ADB-100 User manual

USER MANUAL
20600 Nordhoff St, Chatsworth CA 91311
1-800-545-6900 818-772-9100

Keyboard
Mouse
Trackball
Touchscreen

ASKING FOR ASSISTANCE
TechnicalSupport:
Telephone [phone]
[phone]
Fax [phone]
TechnicalSupportHours:
8:00AMto5:00PMMondaythruFriday.
WriteTo:
GefenSystems
c/o CustomerService
20600 Nordhoff Street
Chatsworth, CA 91311 USA
© 1995GefenSystems,AllRightsReserved
Notice
GefenSystemsreservestherighttomakechangesinthe
hardware,packagingandanyaccompanyingdocumentation
withoutpriorwrittennotice.
ADB100isatrademarkofGefenSystems
MacintoshisatrademarkofApple,Inc.

TABLE OF CONTENTS
GeneralInformation
Introduction ........................................................ 1
OperationNotes................................................... 2
ADB100PanelLayout ........................................... 3
ADB100FunctionDescription ................................ 4
Warranty............................................................. 9
InstallationWiringDiagrams
1KeyboardExtended............................................ 5
2KeyboardsLocal/Extended................................. 6
2KeyboardExtended............................................ 7
TSE100LinkCable ............................................... 8

ThankyouforpurchasingGefenSystems'
ADB100Series.TheADB100extendsyourcomputer
ADBport(keyboard,mouse,trackball,andtouch
screen)device upto1000feetawayfromthe
locationofyourMacintoshcomputer.
TheADB100systemconsistsoftwounits,the
ADB100Sendermodewhichresidesnexttothe
computersideandtheADB100Receivermode,which
residesnexttotheextended keyboard.
TheADBsignalcontrolsthekeyboard,mouse,
trackballandotherADBdevicessuchasatouch
screen.TheADB100bufferstheADBsignalthrough
sendandreceivelinedrivers,andthesignalis
extendedbyusingstandardtelephonecable.
YoucanconnectadditionalADB100Series tothe
samecomputer,allowingyoutoaccessthecomputer
fromotherlocationsupto 1000feetapart.
INTRODUCTION
1

OPERATION NOTES
READTHESENOTESBEFOREINSTALLINGOR
OPERATINGTHEADB100SYSTEM.
1. WARNING!:TheADB100weredesignedtooperate on
Macintoshcomputers.Donotattempttousethisequipment
withanyothertypecomputers.
2. WARNING!:Whenusingalocalkeyboardnotextended
withtheADB100Senderunit,usetheGefenmodifiedADB
cable.ModifiedcableisconnectedbetweentheADB100
senderandthelocalkeyboardormouse.
3. WARNING!:WhenplugginginaADB100Senderunit
ONLY,withouttheADB100receiverunit,thekeyboardand
mousewillfreeze.TheADB100Receiverunitmustbe
connected,andpoweredup,andthelinkcableinstalled
betweenbothunits,inordertooperateproperty.
4. LinkCable:Refertothewiringdiagramonpage10for
wiringinstructions.
2

3
ADB100 PANELS LAYOUT
ON
ADB
P OWERLINK
GEFENSYSTEMS
WOODLANDHILLS,CA 91367
MADE INU.S.A.
RECEIVER
SENDER
3 5
4
2
1

4
ADB
Mini din sub connector which connects to the computer
ADB port. (For keyboard, Mouse and Trackball).
Power On Light
Power on status indicates that the unit is plugged in.
Send/Receiver Switch
Push button switch for setting ADB100 as a Sender or
Receiver unit.
Link
RJ-11 Modular Jack which connects to the TSE100R
(Receiver Unit).
Power
9 Volt A/C 1A external power supply.
1
2
3
4
5
FUNCTION DESCRIPTION

5
Set switch to IN to receive Use Power supply at this end
Set switch to OUT to send No power supply is required at this end
1 KEYBOARD EXTENDED - WIRING DIAGRAM

6
Set switch to OUT to send No power supply is required at this end Set switch to IN to receive
Use Power supply at this end
2 KEYBOARDS LOCAL/EXTENDED - WIRING DIAGRAM