Gefen EXT-AUD -1000 User manual

®
Audio Extender
EXT-AUD-1000
USER MANUAL
www.gefen.com

Technical Support:
Telephone [phone]
[phone]
Fax [phone]
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday Pacific Time
Write To:
Gefen, Inc.
c/o Customer Service
20600 Nordhoff Street
Chatsworth, CA 91311
www.gefen.com
[email protected]
Notice
Gefen, LLC reserves the right to make changes in the
hardware, packaging, and any accompanying documentation
without prior written notice.
The Audio Extender is a trademark of Gefen, LLC
© 2011 Gefen, LLC. All rights reserved.
All trademarks are the property of their respective owners.
ASKING FOR ASSISTANCE
Rev B1

TABLE OF CONTENTS
Introduction
Box Contents
How to Connect the Audio Extender
Link Cable - Wiring Diagram
System Specifications
Warranty
1
2
3
4
5
6

Thank you for purchasing the Audio Extender series.
Gefen’s line of KVM (Keyboard Video & Mouse), ADC, DVI,
USB,switches,extenders,convertersandsplittersisdesigned
tomakecomputerusemorecomfortable, more productive and
less expensive.
KVMswitchesallowaccesstomultiple computersfromasingle
keyboard, while the extenders give the user control over a
computer up to 330 feet away from the work area.
Gefen products offer solutions for noise, space and security
concerns, data center control, information distribution, con-
ference room presentation, and school and corporate train-
ing environments.
INTRODUCTION
1
READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE AUDIO EXTENDER SYSTEM
* Industry standard Category-5 (CAT-5) cables are used to link
the Audio Extender sender and receiver boxes together.
* The Audio Extender units are housed in a metal box for bet-
OPERATION NOTES

Features:
• Extends any unbalanced analog audio device up to 1000
feet (300 meters) from the source
• One CAT-5e cable used for extension
• Bidirectional transmission for speaker and microphone
Includes:
(1) Audio Extender Sender Unit
(1) Audio Extender Receiver Unit
(1) 5V DC power supply
FEATURES
2

HOW TO CONNECT THE AUDIO EXTENDER
How to Connect the Audio Extender
1- Connect the supplied Audio cables from the source
Audio port into the Audio extender send unit.
2- Connect the CAT5 cable from the send unit to the
receive unit.
3- Connect your Audio devices into the Audio extender
receiver unit.
4- Plug the 5 volt power supply into the Audio extender
send unit.
Sender
Receiver
Power
Jack
Power
LED
Audio
In
Audio
Out Mic
Mic
3

LINK CABLE - WIRING DIAGRAM
4
White/Or-
Orange
White/
Blue
White/Blue
Green
White/
Brown
RJ-45 Jack RJ-45 Jack
2 3 4 5
6
7 8 12
3 4 5
6
7 8 1
1818

Sample Rate ............................... 5 kHz (min) - 48 kHz (max)
Frequency Re.................................................... 20Hz - 20kHz
Input/Output .............................................. mini-stereo 3.5mm
Link Connec ................................................... RJ-45 Shielded
Power Consumptio............................................ 5 Watts (max)
Power Su ..................................................... 5 VDC (External)
Dimensions ...................................1 1/4”H x 1 1/2”W x 2.75”D
Weight ............................................................................. 3 lbs
SPECIFICATIONS
5

6
WARRANTY
Gefen warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen is notified within two (2)
years from the date of shipment, Gefen will, at its option, repair or replace the
equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifications. Equipment that fails under conditions
other than those covered will be repaired at the current price of parts and labor in
effect at the time of repair. Such repairs are warranted for ninety (90) days from
the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including
without limitation, any implied warranty or merchantability or fitness for any
particular purpose, all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from
Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their
original condition.
The information in this manual has been carefully checked and is believed to
be accurate. However, Gefen assumes no responsibility for any inaccuracies
that may be contained in this manual. In no event will Gefen be liable for direct,
indirect, special, incidental, or consequential damages resulting from any defect
or omission in this manual, even if advised of the possibility of such damages. The
technical information contained herein regarding the features and specifications is
subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return
Policy under the Support section of the Gefen Web site at www.gefen.com.
PRODUCT REGISTRATION
Please register your product online by visiting the Register Product page