GEM LZ-NH500N User manual

LZ-NH500N Bracket
In-swing doors
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-LZ-NH500N Ver. C Published on 2011.09.08
Application for the Electromagnet:
EM-NH500 Series
21
6 7 Finish
4
5
3
Power
Unit:mm
190
63.5
8
63.5
6
63.5
63.5
190
48
267
75
With LZ bracket for in-swing doors
Use the fixing bolt to tighten
the electromagnet lock on the
L bracket
Find a mounting location on the
door frame for the L bracket. Make
sure that the door is still closeable.
Close the door and connect the
power.
Test the tightness and adjust
the Z bracket to fit the door.
Lock tighten the Z bracket
Insert the guide pins into the
armature plate.
Assemble the armature plate and
the Z bracket. (Must add rubber
washer)
Assemble the Z bracket, and make
sure that the Z bracket is adjustable.
Minimal:75mm
L-Bracket
Z-Bracket
In-swing
Frame
Door
Armature
Plate
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw