GemOro Superior Instruments 6
PRECAUTIONS & WARNINGS
1. The Brilliant Spa is specifically designed for cleaning jewelry.
Although there are many other cleaning applications for the Brilliant
Spa (such as for cleaning dentures, eye glasses, hand tools, small
parts, etc.), caution and common sense should be used at all times
as the Brilliant Spa could damage the item and/or the operator.
2. Use caution: the steam cleaner releases very hot steam under
high pressure. Never touch the steam nozzle or the area
surrounding it, as you may get burnt.
3. Be certain that the black fill cap with its built-in safety release
valve is screwed on by hand prior to use. Do not over-tighten.
Never operate the Brilliant Spa steam cleaner without the fill
cap properly installed.
4. The Brilliant Spa steam cleaner may only be used with
undiluted tap water or distilled water. Never add any type of
chemicals or cleaning agents to the water in the tank prior to
steaming.
5. The Brilliant Spa steam cleaner is designed to operate with a
maximum of 10oz of water in its tank to produce a dry steam. Do
not overfill the steam cleaner tank. To do so will produce a
potentially hazardous sputtering of water and wet steam.
6. Never plug in and attempt to operate the Brilliant Spa steamer
without water in its tank. If the Brilliant Spa runs out of steam
during operation, turn it off and unplug it. Then allow approximately
30 minutes time to cool prior to refilling the tank to its 10oz water
capacity (if water is still in the tank, while unplugged and cool, hold
the Brilliant Spa upside down over a sink to drain the remaining
water in its tank prior to adding 10oz of water). When removing the
black fill cap after the Brilliant Spa has cooled, always unscrew it
slowly while maintaining an arms length distance from it, allowing
the steamer tank to very gradually release its pressure until fully
released.
7. Never attempt to unscrew the black fill cap and refill the
Brilliant Spa steam cleaner tank while it is still hot and under
pressure. There is a built-in safety feature that prevents the