Genebre 5985 User manual

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 20/07/2020 UPDATE NUMBER: 0
1
INSTALLATION, OPERATION AND MAINTENANCE
MANUAL
Manual Device with
spring return
GENEBRE Ref.: 5985

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 20/07/2020 UPDATE NUMBER: 0
2
Installation, operation and maintenance instructions
1. Product Description ................................................................................ 3
2. Storage ...................................................................................................... 3
3. Installation instructions ..................................................................... 4
3.1 Preparation .......................................................................................... 4
3.2 Assembling to the valve ................................................................. 4
4. Operation instructions ……................................................................. 4
4.1 Manual operation ................................................................................ 4
4.2 Torques ............................................................................................... 5
4.3 Connections Dimensions ................................................................... 5
5. Maintenance operations .................................................................... 5
6. Hygiene and Safety Instructions .......................................................... 6

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 20/07/2020 UPDATE NUMBER: 0
3
1. Product Description.
This device prevents the valve from being accidentally opened or in the wrong position as it
ensures return to the original position by a spring.
Total safety for the valve to be closed.
Clockwise 90º.
ISO 5211 Connection.
Housing in zinc alloy with epoxy coating.
Handle and stem of stainless steel.
Maintenance free.
Ideal for sampling systems, purges or applications for emptying or filling tanks.
2. Storage
During storage it is recommended to keep the device in the same position as delivered, with
the included protective wrapping to avoid damages or dirt accumulation. The wrap must not
be removed until the device is to be installed. As far as possible, store in a dry and clean
environment.
Transport and storage of these devices must be done in their original wrapping.
VISUAL INSPECTION
Check whether during transport, unloading and placement, devices have suffered no damages.
MECHANICAL INSPECTION
Check whether all mobile parts of the different devices, as well as the screws and other elements, are
accomplishing their purpose.
If you notice any kind of anomaly during reception of the goods, contact immediately
with GENEBRE in order to determine the possible responsibilities on the issue and make the
devices fully operational.

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 20/07/2020 UPDATE NUMBER: 0
4
IMPORTANT NOTE:
Before installing and/or manipullating these pneumatical elements, READ
CAREFULLY these instructions for use and OBSERVE all contained information. If
you fail to understand any of their content, please contact GENEBRE, S.A.
User is responsible for the safe use of these devices, as established in present
instructions for use and in the specific technical documentation of the device.
3. Installation instructions
3.1 Preparation
Remove any material remains of the element wrapping.
Prepare a clean working area.
Plan beforehand enough space for future maintenance operations.
It is recommended to perform this task under qualified professional surveillance.
3.2 Assembling to the valve
1- Check if the bolt circle on top flange and stem dimensions of the valve coincide with the
bolt circle and square hole of the manual device, respectively (connection according to ISO
5211 standard).
2- Make sure that both valve and manual device are in fully closed position.
3- Mount the manual device with its shaft perpendicular to the valve (or pipeline) by means of
the four screws and washers. Apply "cross method" for tightening.
4. Operation instructions
4.1 Manual operation
Angle of travel 90º (Non-Adjustable).
Rotate the handle slowly with a good grip and make sure there is nothing in the way to
prevent the movement.

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 20/07/2020 UPDATE NUMBER: 0
5
The drive must be slow and safe, do not release the handle freely, it may damage the device
or cause an accident.
4.2 Torques
The torque of the manual device is as listed below:
It is recommended not to overpass the 90% of the maximum allowable torque for a longer life
of the product.
4.3 Connections Dimensions
The manual device are designed for mounting on the valve according to ISO 5211 standard.
5. Maintenance operations
The manual devices are designed so that they do not need any lubrication and/or periodical
maintenance during their life cycle. However, periodical checks will be useful to extend the
service life of the product. Verify all locks and threaded ends to check if they are loose or with
rust. Tighten them if necessary.
Ref.
Torque (Nm)
Start (90º)
End (0º)
5985 02
14
11
5985 07
24
20.5
5985 09
45.5
39.7
Ref.
Dimensiones (mm)
SQ
F
5985 02
11 x 11
F03/F05
5985 07
14 x 14
F03/F05/F07
5985 09
17 x 17
F05/F07
SQ
F

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 20/07/2020 UPDATE NUMBER: 0
6
6. Hygiene and Safety Instructions
6.1) Fluids that go through the valve can be corrosive, toxic, flammable or pollutant. When
operating valves, you must follow the security instructions and it is recommended to use
personal protection gadgets:
1) Protect your eyes.
2) Wear gloves and appropriate working clothes.
3) Wear safety footwear.
4) Wear a helmet.
5) Have running water at hand.
6) To operate flammable fluids, make sure you have an extinguisher at hand.
6.2) Before removing a valve from a pipe, check always if the line is completely drained and
depressurized.