Geneva Cinema+ User manual

Important safety instructions
Mounting instructions
Operation manual

IMPORTANT SAFETY INSTRUCTIONS

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a
safety connection to electrical earth.

This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insu-
lated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock.
WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer
servicing to qualied personnel.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and main-
tenance instructions in the literature accompanying the appliance.
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this device near water.
6.Only clean with a dry cloth.
7.Apparatus can be used in tropical climate.
8.Do not block any vents. Install in accordance with the manufacturer’s instructions.
9.Do not install near any heat sources such as radiators, heaters, stoves, or other devices (including ampliers) that produce heat.
10.No naked ame sources, such as lighted candles, should be placed on the apparatus
11.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
12.Protect the power cord from being walked on or pinched, particularly at the plugs, convenience receptacles, and the point
where they exit the device.
13.Only use attachments and accessories specied by the manufacturer.
14.Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer or sold with the device. When a cart is
used, use caution when moving the cart/device combination to avoid injury from tip-over.
15.Unplug this device during lightning storms or during long periods of disuse.
16.Refer all servicing to qualied service personnel. Servicing is required when the device has been damaged in any way, such as:
power supply cord or plug damages, liquid has been spilled or objects have fallen into the device, the device has been exposed
to rain or moisture, does not operate normally, or has been dropped.
17.Do not install this equipment in a conned or built-in space such as a book case or similar unit, and maintain well-ventilated
conditions. The ventilation should not be impeded by vents being covered with items such as newspaper, table cloths, curtains,
and so on.
18.WARNING: Please refer to the information on the exterior bottom enclosure for electrical and safety information before install-
ing or operating the device.
19.WARNING: To reduce the risk of re or electric shock, do not expose this device to rain or moisture. The device should not be
exposed to dripping, splashing, or objects lled with liquids such as vases, which should never be placed on the apparatus.
20.Standby Power Consumption 0.38W
21.WARNING: The direct plug-in adapter is used as a cut-off device. The cut-off device should remain readily operable.
22.Correct disposal of this product: This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle this
product responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe
recycling.
23. Operating Temperatures: The recommended operating temperature range for the CINEMA+ is 5 to 40 degrees Celsius / 41 to
104 degrees Fahrenheit.24,.
24. The apparatus shall not be exposed to dripping or splashing of any kind of liquid. No objects lled with liquids, such as vases,
shall be placed on the apparatus.
25. Main plug is used to disconnect the device from power supply and should be remain readily operable during intended use.
In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket
outlet completely.
26. Caution marking is located at the rear or bottom of the apparatus.
CONFORMITY
Label location
The product labels and safety related markings are located in the bottom side of the the CINEMA+ and in the power adapter.

CE Conformity

G-Lab GmbH declares that the CINEMA+ is in compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU.
The declaration of conformity may be consulted at the request to G-Lab GmbH, Zug, Switzerland or on genevalab.com.
RECYCLING


This product can be recycled: Products bearing this symbol must NOT be thrown away with normal household waste. At the end
of the product’s life, take it to a collection point designated for recycling of electrical and electronic devices.
Find out more about return and collection points through your local authority.
The European Waste Electrical and Electronic Equipment (WEEE) Directive was implemented to dramatically reduce the amount
of waste going to landlls, thereby reducing the environmental impact
on the planet and on human health. Please act responsibly by recycling used products.
If this product is still usable, consider giving it away or selling it.
Used batteries: Please dispose of used batteries properly, following the local regulations. Do not place the battery in re.
© 2019 G-Lab GmbH. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of G-Lab GmbH.
Geneva Cinema+, User Manual, Version v1, model A220.
Mounting instructions
NOTE: for oor stand and table stand instructions, please refer to the manuals included in the
stands packaging
1) x the 4 rubber feet.
2) screw the vertical rails on the Cinema+ according to your TV’s size
3) screw the horizontal rails on your TV VESA holes.
4) mount the TV on without covering the speaker area on front of the grill
5) push the 2 lock levers of the horizontal Vesa top rail into the vertical rail holes
NOTE: please refer to your TV VESA manual for more information.
Cinema+ supports the following TV VESA standards:
200x200, 200x300, 200x400, 300x300, 300x400, 400x400
Maximum weight: up to 30kg
Compliant TV sizes: 40 to 65 inches

Rubber feet are only needed for a wall mount setup to manage the distance between the Cinema+
and the wall.
The rubber feet are designed to not leave marks on any su rface.
Wall mount screws are not included in the packaging and must be bought separately, this because
different type of walls need different types of screws (wood, concrete, etc.)
Wall Mount holes
1

NOTE: Do not cover the black grill area with your TV. The LED should be centered between your TV border
and the main unit bottom edge.
3
2
Horizontal Vesa Rails
Speaker area - do not cover with TV
TV
Vertical Rails

Horizontal Vesa Rails
Speaker area - do not cover with TV
TV
Vertical Rails
4
5
TV connection
Cinema + can connect to your TV in the following ways:
• Optical (TV2): use this for the best audio quality
• ARC: if your TV has a socket labelled “ARC”, use this connection
• RCA: use this to connect both Left and Right channel to your TV
• Line-IN: if your TV has a line out/headphones out, you can use this connection. This socket can be
used also for other sources like CD players, Tuners, pre-amplied Vinyl players, etc.
Note: 3.5mm line-in socket takes priority over RCA socket
Important Note: Cinema+ is only able to decode LPCM (PCM) 2.0 audio format signal. Please ensure
your TV audio format is set to LPCM (PCM).
For more information, please refer to your TV user manual.
Bluetooth setup
Cinema+ allows wireless playback from any Bluetooth equipped device.
• Select BT on the remote: Cinema+ will reconnect to the last available paired device
• Press and hold BT on the remote to connect a new Bluetooth device (blue LED starts ashing). Repeat
this procedure for every new device. Cinema+ can store up to 8 devices
Note: refer to your Bluetooth device manual to connect to Cinema+
Remote learning
Cinema+ can learn volume down/up from other remotes (TV, set top box, etc.)
If you are using HDMI ARC, it is not necessaryto ‘learn’your TV remote control with Cinema+.
HDMI ARC enables CEC (Consumer Electronics Control) commands to be sent between your TV and Cine-
ma+. This means you will only need one remote to power on both devices and control the volume.
• Press LEARN on the right side of cinema+ 3 seconds (Red LED starts ashing)
• Press + button on the right side of cinema+
NOTE: secure the TV on the stand by pushing
the lock lever into the vertical rail holes

• Press volume+ on your remote while pointing at the center of the Cinema+ front metal grill
• Red LED stop ashing when the command is stored
Repeat the same procedure for volume down button
Sound mode
Cinema+ features 4 different sound mode to enhance your sound experience. You can manually increase
and decrease Subwoofer level with sub-/+ button on your remote
MUSIC: optimized for listening to music, YouTube clips and concerts
VOICE: optimized for crystal clear speech
NEUTRAL: optimized for at EQ listening
FILM: optimized for sound effects and action movies
Other features
Auto Power ON: Cinema+ turns on automatically when you turn your TV on
Auto Power OFF: Cinema+ turns off automatically after 20 minutes if no sound is playing
Troubleshooting
Why is sound coming from my TV and my Cinema+ simultaneously?
Cinema+ is designed to replace your televisions internal speakers and the audio should only be present
in the Cinema+.
Most televisions will automatically recognize an optical output, but some will not. You mayneed to adjust
your audio output settings on your TV andchange this to an external speaker or Digital output.
We recommend consultingyour user manual or your TV manufacturer fordetails on how to do this.
How do I pair another remote with Cinema+?
Refer to “Remote learning” chapter every time you want to pair a new remote
Why do I hear a strange sound from my TV2 when watching HD content?
With some TV’s, the Cinema+ could output a distorted sound if you are viewing HD content such as:
• HD Channels
• Netix Apps
• Amazon Instant Video Apps
• Blu-Ray/DVD’s
• Satellite TV Provider e.g. Sky, Virgin TiVo etc.
This occurs because these will output multi-channel (surround) sound as a default setting.
As Cinema+ is only able to decode a stereo PCM signal, you will need to ensure theaudio output of your
TV/App/Box’s settings are congured to LPCM/Stereo. If you are unsure of how to amend your settings,
please consult your TV/Box’s manufacturer.
What do Cinema+ coloured LED’s represent?
The different colored LED’s represent the source you are using. Please nd the sources and their corre-
sponding color below.
• HDMI ARC - Purple
• Optical - Pink
• Line-IN - Green
• Bluetooth – Blue
For more information, check www.genevalab.com/support