Geneva XS User manual

01 Manual - English
05 Bedienungsanleitung - Deutsch
09 Mode d’emploi - Français
13 Manual del usuario - Español
17 Manuale dell’utente - Italiano
21 Handleiding - Nederlands
25 Brugervcejledning - Dansk
29 Användar Manual - Svenska
33 Bruksanvisning - Norsk
37 Käyttöohje - Suomi
41 Manual do usuário - Português
GENEVA SOUND SYSTEM
MODEL XS

English
1
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all instructions
5. Do not use this device near water.
6. Only clean with a dry cloth.
7. Do not block any vents. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heaters,
stoves, or other devices (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not t into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at the plugs, convenience receptacles, and the point
where they exit from the device
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specied by the manufacturer, or sold with the device
When a cart is used, use caution when moving the
cart/device combination to avoid injury from tip-over.
13. Unplug this device during lightning storms or during
long periods of disuse.
14. Refer all servicing to qualied service personnel. Servicing is
required when the device has been damaged in any way, such
as power-supply cord or plug damages, liquid has been spilled
or objects have fallen into the device, the device has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15. Do not install this equipment in a conned or built-in space such
as a book case or similar unit, and maintain well-ventilated con-
ditions. The ventilation should not be impeded by covering the
vents with items such as newspaper, table-cloths, curtains etc.
16. WARNING: Please refer the information on exterior bottom
enclosure for electrical and safety information before installing
or operating the device
17. WARNING: To reduce the risk of re or electric shock, do not
expose this device to rain or moisture. The device should not be
exposed to dripping or splashing and objects lled with liquids,
such as vases, should not be placed on the apparatus.
18. CAUTION: Danger of explosion if battery is incorrectly replaced.
Only replace with the same or equivalent type.
19. WARNING: The battery (battery or batteries or battery pack)
should not be exposed to excessive heat such as sunshine,
re or the like.
20. WARNING: The direct plug-in adapter is used as a cut-o
device, the cut-o device should remain readily operable.
21. Correct Disposal of this product. This marking indicates that this
product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return
and collection systems or contact the retailer where the product
was purchased. They can take this product for environmental
safe recycling.
CAUTION: Risk of explosion if battery is replaced incorrectly.
Replace only with a battery of the correct type and model number
(Geneva Sound System, Model XS Replacement Battery).
Operating Temperatures: The recommended operating temperature range for the
Geneva Sound System is 5..40 degrees Celsius / 41..104 degrees Fahrenheit.
Use the original power adapter: Only use the supplied original power adapter
to power and charge the Geneva Sound System. Other power adapters might
look similar, but using them could result in electric shock and could damage the
Geneva Sound System.
In case of an electrostatic discharge of at least +/- 4 kV the unit may malfunction
and will require to powered o and on again.
LABEL LOCATION
The product labels, FCC information and safety related markings are
located in the battery compartment of the Geneva Sound System and
the power adapter.
FCC REGULATIONS
Warning: Changes or modications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
“NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harm-
ful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
AC/DC Adapter with one of ferrite ring must be used with this unit to
ensure compliance with the Class B FCC limits.
Modications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment under FCC rules.
FCC ID: ZXX-MODELXS
“ZXX”: Grantee Code, assigned by the FCC.
RECYCLING
This product can be recycled. Products bearing this symbol must NOT be
thrown away with normal household waste. At the end of the product’s
life, take it to a collection point designated for recycling of electrical
and electronic devices. Find out more about return and collection points
through your local authority.
The European Waste Electrical and Electronic Equipment (WEEE) Directive
was implemented to dramatically reduce the amount of waste going
to landlls, thereby reducing the environmental impact on
the planet and on human health. Please act responsibly by
recycling used products. If this product is still usable, consider
giving it away or selling it.
Used batteries: Please dispose of used batteries properly, follow-
ing the local regulations. Do not place the battery in re.
Hereby, G-Lab GmbH, declares that this Model XS is in compliance with
the essential requirements and other relevant provisions of Directive
1999/5/EC. The declaration of conformity may be consulted at request to
G-Lab GmbH, Zurich, Switzerland or on http://genevalab.com.Geneva®is
a registered trademark of G-Lab GmbH.
Apple , iPod, iPhone and iPad are trademarks of Apple Computer, Inc. registered
in the U.S. and other countries.
The trademark EmbracingSound™is owned by Embracing Sound
Experience AB.
The Bluetooth® word mark and logos are registered Trademarks owned by
Bluetooth SIG, Inc.
© 2011 G-Lab GmbH. All rights reserved. Under the copyright laws, this manual
may not be copied, in whole or in part, without the written consent of G-Lab
GmbH.
Geneva Sound System, Model XS, User Manual, Version v1.0-A, 8/2011

2
GETTING STARTED
Inserting the Rechargeable Battery
1. Open the case and turn your Model XS so you can
access the battery compartment on the back.
2. Plug the battery cable into the small white connector
in the upper left corner of the battery compartment.
3. Place the battery into the back compartment.
Carefully fold the cable next to the battery.
4. Take the lid and push it until it snaps in.
Charging the Battery
5. Once the battery is in place, plug the power
adapter cord into your Model XS (“DC 5.5V”).
Turning the Power On
1. Open the case.
2. Insert the two hooks of the top cover into the Model XS.
When the Model XS is not in the correct position, it
will automatically turn o to save battery power.
Correct position Turns o automatically
OVERVIEW
You can play music from the following sources:
• FM Radio
• Mobile phone or computer via Bluetooth
• Other devices with a Line-In cable
Model XS
Included Accessories
• Power adapter
• Line-In cable
• Protective bag
• User manual
Touch Panel

English
3
USING THE MODEL XS
FM Radio
1. Touch until the display shows an FM
frequency, for example “103.2”.
2. Select an FM station with and :
• Use a single touch: change frequency by 0.1 MHz.
• Hold down for a short time: automatically
search for another station.
For optimal reception extend the built-in antenna.
Bluetooth
Mobile phones and computers with Bluetooth can
connect to the Model XS and play music.
The mobile phone or computer must support Blue-
tooth A2DP. Detailed guides on various devices with
Bluetooth A2DP can be found at www.genevalab.
com, select “Support”.
Initial Setup (“pairing”) With iPhone®
1. Touch the key until the display shows“Blue”.
2. Select “settings”on your iPhone®. Select “General /
Bluetooth”. Turn on Bluetooth. New Bluetooth
devices are discovered automatically. After a few
seconds“Geneva XS Sound System (Not Paired)”
will appear.
3. Select “Geneva XS Sound System”. The phone is
now connecting (“pairing”) to the Model XS.
4. If the phone asks for a PIN: enter“0000”(four zeros).
5. Now you can play music on an iPhone®App
“iPod” and listen to it on the Model XS.
Setting on iPhone®Playing music with App“iPod”
Playing Music
Most phones connect automatically to the Model XS
after the initial setup (“pairing”).
1. Touch the key on your Model XS until the display
shows “Blue”.
2. Play music on the mobile phone, music will start
playing on Model XS automatically after
a few seconds.
Initial setup (“pairing”) with other devices.
See detailed guides at www.genevalab.com,
select “Support”.
Line-In
Not all audio devices have Bluetooth. Model XS also
connects via a 3.5 mm / 1.8" stereo input.
1. Connect one end of the supplied Line-In cable to
the audio device (headphone or Line-Out plug).
2. Connect the other end of the cable to the Line-In
plug on the back of Model XS .
3. Touch until the display shows“Line”.
Alarm
Setting the Alarm
1. Turn on Model XS, then touch : a blinking “A”
appears on the display.
2. Set the desired alarm time using and .
3. Touch again to save the alarm time. “A”
indicates alarm is now on.
Turning the Alarm On And Off
Turn o Model XS, then touch any key on the touch
panel to toggle the alarm.“A”on the display indicates
the alarm is on.
Muting the Alarm
Touch any key on the touch panel to mute the alarm.
The alarm will automatically turn o after 20 minutes
if no key on the touch panel is touched.
Selecting the Alarm Sound
There are two alarm sounds: FM radio and a beeping
sound. If you set the alarm and the current mode is
FM, the FM radio will play when the alarm goes o.
Otherwise the beeping sound is used.
Setting the Clock
1. Turn on Model XS, then touch . The letter “C”
starts blinking on the display.
2. Use and to set the current time.
3. Touch to complete the procedure.
AM/PM Display: US Version Only
The dot to the right of the minute digits indicates
AM or PM:
• O: AM
• On: PM

4
TROUBLESHOOTING
The Model XS will not turn on, the display
shows “low” and “batt”.
“low” and “batt” means low battery. Connect the
power adapter to the Model XS and the battery will
begin charging. You can use the Model XS right away.
The Model XS will not turn on, nothing happens.
If the battery is very low, there is too little power to
turn on the display, even if the power adapter is con-
nected. Model XS can be turned on after it has been
connected for a few to the power adapter.
Why is the Model XS turning o after
a while?
After one minute the device will
automatically turn itself o, when it is
not in the correct position (see gure
in “Turning the Power On”).
The Model XS does not turn on when
I touch the button.
Touch with one nger only. Don’t touch the rest of
the touch panel with other ngers. The touch panel
works properly when used with one nger only.
After turning on, the Model XS turns itself quickly o
and on again.
Model XS automatically self-calibrates the touch
panel for a second time. This is the correct behavior
and is nothing to worry about.
What is the PIN for a Bluetooth connection?
The PIN is: 0000 (4 zeros). Not all computers or
mobile phones require a pin code during the initial
setup (pairing).
Why is my mobile phone not connecting?
You will nd more detailed information on various
mobile phones on the Support pages at
www.genevalab.com.
I have an unreliable connection with dropouts when
listening via Bluetooth.
• Move the mobile phone closer to the Model XS.
• Move away or turn o other wireless devices that
can disturb a Bluetooth connection (for example
WLAN / Wi, other mobile phones etc.).
How do I know if the battery is charging?
A small dot on the lower right of the display blinks
slowly if the battery is being charged.
The sound output seems too low.
Turn the volume on the mobile phone or audio device up.
How can I check the battery charge?
A dot on the lower right corner of the display shows
the battery status:
• On: battery fully charged.
• Slow blink: battery charging.
• Fast blink: battery low.
If the battery is low, the display will also show “low”
and “batt”. In this case the Model XS will automati-
cally turn o, but it still has enough power to show
the time for a while.
Why is the unit louder when it is connected to a
power adapter?
When the Model XS is battery powered, the maxi-
mum volume is limited to maximize battery life.
Why is the alarm not working when the case is
closed?
The alarm does not work in this position because
the device power is o. However, the clock is still
running.
How do I change the battery?
1. Carefully open the battery lid with a at top
screwdriver.
2. Remove the used battery and replace it with a
new one.
Only use an original XS battery replacement from
Geneva! You can order the battery at
www.genevalab.com.
3. Insert the new battery while following the instruc-
tions under “Getting started” in this manual.
SUPPORT
More information, troubleshooting, etc.
Select “Support” at www.genevalab.com.
Service and Repair
If the product is damaged and needs repair, please
contact your dealer. Visit www.genevalab.com to nd
a dealer in your area.
Warranty
See the specic terms for your country at www.
genevalab.com.