Geniatech ATV520V ENJOY TV DUAL CORE Platnium User manual

Android Box
ENJOY TV DUAL CORE Platnium
ATV520V
User’s Guide
Thank you for purchasing this Geniatech product.
.Before using it, be sure to read the precautions contained in this User’s Guide.
.Keep the User’s Guide in a safe place for future reference.
.For the most up-to-date information about this product, visit official website at
http://www.geniatech.com

1
1. Safety Information
Read and understand all instructions before using this product. If damage is caused by failure to
follow the instructions, the warranty does not apply.
1.1 Warning
To reduce the risk of electric shock, DO NOT remove the cover (or back).
DO NOT attempt to repair the product, this could lead to the risk of injury, damage to the
product .
To reduce the risk of fire or electric shock, keep this product away from exposed direct sunlight,
naked flames or heat, large amounts of moisture, dust, and sand.
FCC Note (for U.S.A)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following
measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
- This class B digital product meets all requirements of the Canadian Interference - Causing
Equipment Regulations.
1.2 Precautions
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for future reference.
1.2.1 Read these instructions.
1.2.2 Keep these instructions.
1.2.3 Heed all warnings.
1.2.4 Follow all instructions.
1.2.5 DO NOT use this apparatus near water.
1.2.6 DO NOT clean with any chemical detergent. Clean only with a dry cloth.
1.2.7 DO NOT block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
1.2.8 DO NOT install near any heat sources such as radiators, heat registers, stoves, or other
apparatus that produce heat.
1.2.9 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where it exits the apparatus.
1.2.10 Only use attachments/accessories specified by the manufacturer.
1.2.11 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used , use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
1.2.12 Unplug this apparatus during lightning storms or when unused for long period of time.

2
1.2.13 Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as when the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
1.3 Handling Cautions
1.3.1 DO NOT expose this apparatus to dripping or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
1.3.2 To turn this apparatus off completely, you must pull the power plug out of the wall socket.
Consequently, the power plug must be easily and readily accessible at all times.
1.3.3 DO NOT plug multiple electric devices into the same wall socket. Overloading a socket
can cause it to overheat, resulting in a fire.
1.3.4 Before connecting other components to this player, be sure to turn them off.
1.3.5 If the product makes an abnormal noise or produces a burning smell or smoke, turn off
the power switch immediately and disconnect the power plug from the wall outlet. Then,
contact the nearest customer service center for technical assistance. Do not use the product.
Using the product as it is may cause a fire or an electric shock.
2. Introduction
2.1 Package Contents
Enjoy TV Dual Core Nano - ATV520V
User’sGuide
HDMI Cable
A/VCable
Optional Cable RJ45 Network Cable
IR Remote Controller (IR RC)
Optional Remote Controller
2.4G wireless Remote Controller
USB wire/wireless Mouse & Keyboard
Power Adapter, Input: AC100 ~ 240V, 50/60Hz, Output: 5V/2A
2.2 Product Features
ARM CORTEX A9 x 2, 1.5GHz, RAM 1G, built in 4G flash memory
Powered by Android 4.1 OS
802.11b/g/n WIFI module, wireless Internet access
2 USB interfaces, support mobile HDD, wired/wireless mouse and keyboard operation
RJ45 10/100M Ethernet interface
Support 1080P video playback
HDMI video output, connect to HDTV for HD video playback
Support weather, calendar, and desktop clock gadgets
Support 2.4G wireless motion Remote Controller

3
Support Flash Player 10.2 for hardware decoding, Flash 11.1 for software decoding ,
playback online video
Support music player, picture player and more family entertainment
Support Google Chrome browser and virtual private network access
App Installer for application installation from USB/SD card
2.3 Panel Introduction
2.4 Remote Controller
[01] Power
[02] Mode
[03] Mute
[04] Up
[05] Left
[06] Right
[15] Page up
[07] Down
[16] Volume -
[08] Enter
[17] Page down
[09] Exit
[10] Home
[11] Switch
[12] Menu
[13] Volume +
[14] Notifications
Note: Button Battery 2025 3V insert with correct polarity (+/-).

4
2.5 Setup Connection
Place ATV520V on a flat platform near the TV, and make sure nothing block the remote control
signal.
2.6 Display when Power Up
2.6.1 After power up, the TV will first show a green robot then change to “android” logo during
loading. When loading is finished, it will go to Home screen.
2.6.2 Home Screen display.
3. Settings
Using Navigation (4 directions), OK, EXIT, and Menu keys of Remote Controller to select the
options, the option selected will be highlighted and confirmed by pressing OK key. Same

5
operation for text input if needed.
Select icon then press OK key.
3.1 WiFi
3.1.1 It will automatically scan ambient WiFi networks when select “ON”.
3.1.2 Connect an available WiFi network. If connect a secured WiFi network, corresponding
password will be input firstly. Or fail to connect and need reset password.
3.1.3 Once build up the connection with a certain WiFi network successfully, ATV520V will
connect this WiFi network automatically when restart.
Note: If factory reset, the password of WiFi network have to be reset.
3.2 Ethernet
Connect Box and Router by RJ45 network cable.
Press “ ON” in Ethernet setting, it will connect to network automatically.
3.3 Date usage
Show data usage information.

6
3.4 More...
3.4.1 VPN
Build and set VPN
3.4.2 Portable hotspot
3.4.2.1 Enable Portable hotspot
3.4.2.2 Configure WiFi hotspot
3.4.2.3 Choose different security way to share your network.
3.4.2.4 Help for any confusion

7
Note: WiFi and hotspot connection can not be applied at same time. Disconnect WiFi and
connect Ethernet while using hotspot function.
3.4.3 Proxy settings
Setup proxy server
3.5 Sound
3.5.1 Volumes
Increase or decrease sound volumes
3.5.2 Touch Sounds
If enable Touch sound, sound will be heard while move remote controller.
3.6 Display
3.6.1 Wallpaper
Could be customized by User self
3.6.2 Output mode
Default setting: 720p
3.6.3 Display position
Use navigation keys and OK buttons of remote control to adjust display position when the
screen is not display as full screen on your TV
3.6.4 Font size
Change the font size of OSD

8
3.7 Storage
Shows the storage used of the OS and SD card.
3.8 Apps
List all apps installed.
You can choose an application and force to shut down the app, uninstall the app, clear user data,
move to SD card and clear cache data.
3.9 Accounts & sync
Account setting and synchronization

9
3.10 Security
3.11 Language & input
Change OSD language and input method.
The default input method is android standard keyboard.
If you are using our IR remote control, enter into “Default” option and switch to remote
controller input method.
3.12 Backup & reset
Back up my data:

10
You can backup your application data, WiFi password and other settings.
Factory data rest:
You can reset all the settings and apps to factory default.
Note: You might want to backup important data before resetting the box. Once you choose to
rest to factory default, all data/apps will be deleted.
3.13 Date & Time
Set date, time, time zone and time format
3.14 Accessibility
N/A for ATV520V
3.15 Developer options
If user want to do some debugging on box by ADB, enable USB debugging, you will get ADB
function by Ethernet or WiFi network.

11
3.16 About MediaBox.
Firmware version under build number.
4. Apps Install & Uninstall
On ATV520V, you can install apps from Android Market over the Internet or other sources,
such as other online sources, the internal storage and the USB storage device and SD card that
you have mounted onto ATV520V.
You also can manage apps on ATV520V and SD card, install/uninstall apps, stop running apps,
or select other options.
5. TV Chin
TV Chin Is the first OTT IPTV platform in Europe, specialized in the needs and requirements
of the Chinese community.
With the service, you will easily access the best Chinese TV contents at the best price - General
and thematic channels, movies, TV series, sports, documentaries and entertainment shows,...
TV Chin app has a very user friendly interface formed of a screen menu with 3 options:
Channel Menu: Displays all the available channels with their corresponding logos.
Time Play: Time shift for China Time, allows the user you watch TV Chin as if he
actually was in China.
Information tab: Displays expiring date of the service, as well as the User ID and the
booking URL.

12
The TV Chin application can be found in the applications folder of your STB. (See picture
below).
5.1 Channel Menu
The Channel menu shows all the a list of all the available channels in the TV Chin service. All
available channels are displayed with their corresponding logo in the Channel List.

13
To display the channel menu, press the Menu button of your remote controller and select the
"Channel" option of the OSD menu that will appear on the bottom part of your screen.
The Channel Menu is the displayed in the left side of the screen. Use up and down arrows and
the OK button of your remote controller to navigate through the channel menu and select the
desired TV channel.
5.2 Time Play
The time play option allows TV Chin users to watch Television as if they were watching TV in
China.
Prior to using the time play option its necessary to configure the local time of your STB
(Setting/System/Date and Time).
Time play has two different operational modes:
Live Stream: Plays the current live streaming of each TV channel.

14
Time Play Stream: Consists of a time shift streaming that corresponds to the time
difference between China and your current country. This allows the TVChin user to
watch Chinese TV as if they were watching TV in China at their corresponding country
local time.
5.3 Information
In the information tab, TVChin users can find all the relevant information related to their
subscription to the TVChin service. The available information in the Information tab is divided
in two sections Account Information and Account Renew:
Account Information: Displays the TV Box (STB) MAC Address and the expire time
of the current TV Chin service booked.

15
Account Renew: This page shows the client ID (required for the renewal of the TVChin
service) and the URL to renew the service (http://www.tvchin.com/-.html).
6. Firmware Update
You can download newest firmware from Geniatech Official website: www.geniatech.com
7. Trouble Shooting/FAQ
7.1 No Picture
Refer to the TV user manual for how to select the correct video input channel.
7.2 USB Content cannot be read
. The format of USB storage device is not supported
. The supported memory size is 32G maximum.
. Make sure that this player supports these files.
7.3 Remote Controller cannot respond quickly to the pressing of keys
Make sure that batteries have enough power.
7.4 The firmware updating is not complete after a long time
If you update the firmware over the online service, it may take a long time to download the
firmware update files from the server. To save your time, update the firmware through the SD
card.
8. Repairs
If you contact us to repair your player, an administration fee may be charged if either:
http://www.tvchin.com/-.html

16
An engineer is called out to your home at your request and there is no defect in the product.
You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or
begin any work on your player.
We recommend you read this manual throughly, search for a solution on line at
www.geniatech.com, or contact Geniatech Customer Care before seeking to repair your player.
9. Specification
CPU Dual core ARM CORTEX A9 1.5GHz, 3D engine
GPU Mali 400MP2 @400MHz
RAM 1G DDR3
ROM 4G, built in 2G-32G Flash memory optionally
OS Android 4.1 OS
Optional CEC, playready, octoshape, widevine, verimatrix
USB USB2.0x2, Support Mobile HDD, wired/wireless mouse and keyboard
HDMI V1.4a
DC Input 5V-2A
SD Slot Max: 32G
Video Output HDMI/CVBS
Audio Output HDMI/RCA
IR receiver
LAN RJ45 10/100M Ethernet interface
WiFi IEEE 802.1 B/G/N 2.4G, wireless Internet access
Audio Decoder MPEG MP1, MP2, MP3
WMA WMA Ver: 4, 4.1, 7, 8, 9 WMA Pro
Others WAV, OGG, OGA, FLAC, ALAC, Ape, AAC, M4A,
AC3,DTS,RM
Video Decoder Performance Max: 1920x1080p @ 30fps
MPEG DAT, MPEG, MPG, MPE
MPEG2 MPEG, MPE, MPG, M2V, ISD, TS, VOB
MPEG4 AVI, MOV, MP4, MKV, 3GP, 3GPP, FLC
Divx Divx 3, 4, 5(AVI)，Xvid(AVI)
H.264 AVI, MOV, MP4, MKV, TS, M2TS, M3TS, M4TS,
M5TS, MTS, M4V, FLV
H.263 AVI, FLV, 3GP, 3GPP, MOV, MP4, 3G2
VC1 AVI, TS
W M V W M V, AV I
Image Memory limitation, 8000x8000 pixels
Movie Subtitle Font Sub-title ASS, SMI, SRT, SSA , TXT
Image Sub-title idx/sub
Storage System FAT16, FAT32, EXT2, EXT3, NTFS
Size 100 x 100 x 15mm
Net Weight 160g

17
10. Trademark Notice
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in United States and other
countries.