Genie CCTV 1000TVL User manual

High Resolution 1000TVL
Bullet Cameras
User Manual

High Resolution 1000TVL Bullet Cameras
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE
Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference
at his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
This installation should be made by a qualified service person and
should conform to all local codes.
CAUTION : To prevent electric shock and risk of fire hazards:
• Do NOT use power sources other than those specified.
• Do NOT expose this appliance to rain or moisture.

3
High Resolution 1000TVL Bullet Cameras
Contents
General Features.........................................................................................4
Precautions..................................................................................................5
Safety Instructions......................................................................................6
How to Set Up the Camera Menu..............................................................7
Menu...........................................................................................................10
Menu Set Up..............................................................................................11
Lens............................................................................................................12
Exposure.....................................................................................................12
White Balance............................................................................................14
Backlight....................................................................................................15
DNR............................................................................................................17
Day & Night................................................................................................17
Image..........................................................................................................19
System........................................................................................................20
Special........................................................................................................21
Exit..............................................................................................................25
Specication..............................................................................................26
Troubleshooting.........................................................................................38

High Resolution 1000TVL Bullet Cameras
4
General Features
• 1000TVL
• WDR (Wide Dynamic Range)
• Preset
• DNR (Digital Noise Reduction)
• Smart IR
• Sens-Up
• Defog
• CVBS (Composite Video Blanking and Sync)
• Motion Tracking

5
High Resolution 1000TVL Bullet Cameras
Precautions
Do not install the camera in
extreme temperature
conditions.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful
to provide ventilation when operating
under high temperatures.
Do not install or use the
camera in an environment
where the humidity is high.
Do not install or use the camera in
an environment where the humidity
is high.
Do not install the camera
under unstable lighting
conditions.
Severe lighting change or flicker can
cause the camera to work improperly.
Do not touch the front lens of
the camera.
Do not expose internal grade
cameras (Mini Domes) to rain
or moisture.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
Never keep the camera
pointed directly at strong
light.
It can cause malfunctions to occur.
Do not drop the camera or
subject it to physical shocks.
Do not expose the camera to
radioactivity.
If it gets wet, wipe dry immediately.
Liquids can contain minerals that
corrode the electronic components.
If exposed to radioactivity the CCD
will fail.
NOTE
• If a camera is exposed to spotlights,
or objects which reflect strong light,
smearing or blooming may occur.
• Please check that the power satisfies
the normal specification before
connecting the camera.

High Resolution 1000TVL Bullet Cameras
6
Safety Instructions
Precautions for Use
• This camera should only be installed by qualied personnel.
• There are no user serviceabe parts inside.
• Do not disassemble this camera other than to make initial adjustments.
• Use appropriate low voltage power cable to prevent re or electrical shock.
• Please ensure your installation area can support the weight of the camera.
Please handle this Camera carefully
• Do not use strong or abrasive detergents when cleaning the camera.
• Do not expose the camera to direct sunlight.
• Do not install the camera in places where humidity is high.
• Do not install near cooling or heating devices.
• Do not expose an internal grade camera to rain or moisture.

7
High Resolution 1000TVL Bullet Cameras
How to Set Up the Camera Menu

High Resolution 1000TVL Bullet Cameras
8

9
High Resolution 1000TVL Bullet Cameras

High Resolution 1000TVL Bullet Cameras
10
Menu
Menu settings can be selected using the buttons inside the camera.
1. Press the SET button.
* The Menu will be displayed on the monitor.
MENU
PRESET: Preset is provided to maximize user convenience.
(PRESET: Indoor / Outdoor / Low light / Hallway / Lobby / Elevator)
2. MAIN SETUP: Enter the Main Setup to adjust further settings.
3. RESET: Move the OSD Joystick left or right on EXIT then the RESET option will appear. Press the
button for 2-3 seconds to reset.
MENU
1. PRESET
2. MAIN SETUP
3. EXIT
INDOOR
MENU
1. PRESET
2. MAIN SETUP
3. EXIT
INDOOR
MENU
1. PRESET
2. MAIN SETUP
3. EXIT
INDOOR
MENU
1. PRESET
2. MAIN SETUP
3. EXIT
INDOOR
RESET

11
High Resolution 1000TVL Bullet Cameras
Menu Set Up
Menu settings can be selected using the buttons inside the camera.
1. Press the SET button.
* The Set Up Menu will be displayed on the monitor.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
2. Move and select the required function using the Up and Down buttons.
3. Change Menu settings using the Left or Right buttons.
* Available values are displayed by pressing the Left and Right buttons.
Press the buttons until the desired value is displayed.
4. After altering the setting, move the cursor to EXIT and press the SET button to exit.
NOTE
* Move to the available submenu by moving arrow to desired feature.
* A submenu is not available when this symbol is displayed “---”.

High Resolution 1000TVL Bullet Cameras
12
2. Select the desired mode by pressing the Left or Right button.
NOTE
* On DC mode, you can select INDOOR, OUTDOOR, or DEBLUR depending on the installation
environment.
* On MANUAL mode, you can select NORMAL or DEBLUR depending on the installation environment.
Lens
This function adjusts the brightness of the image being displayed on the monitor.
1. Move the cursor to LENS using the Up and Down buttons on the Set Up Menu screen.
2. Select the desired lens type by pressing the Left or Right button.
Exposure
1. On the Main Menu, Select EXPOSURE using the Up or Down buttons.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN

13
High Resolution 1000TVL Bullet Cameras
3. BRIGHTNESS: Used to adjust the overall brightness level.
(BRIGHTNESS : 0 ~ 20 / Default Value : 10 )
2. EXPOSURE
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
AUTO
X16
IIIIIIIIII IIIIIIIIII|10
IIIIIIIIII IIIIIIIIII|15
4. SHUTTER: Adjust the Electronic Shutter Speed by selecting one of the modes.
(AUTO, MANUAL, FLICKER).
2. EXPOSURE
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
MANUAL
X16
IIIIIIIIII IIIIIIIIII|10
IIIIIIIIII IIIIIIIIII
|15
2. EXPOSURE
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
MANUAL
X16
IIIIIIIIII IIIIIIIIII|10
IIIIIIIIII IIIIIIIIII|15
• MANUAL MODE: Shutter Speed is adjustable from 1/60 up to 1/60,000. (PAL : 1/50 - 1/60,000)
SHUTTER
SPEED
RETURN
1/60
5. SENS-UP: The degree of darkness is automatically sensed and compensated for.
(Digital Slow Shutter: x2 ~ x64)

High Resolution 1000TVL Bullet Cameras
14
6. AGC : The brighter image can be displayed by adjusting AGC (Auto Gain Control) level.
(AGC : 0 ~ 20 / Default : 15 / Default Value : 15)
2. EXPOSURE
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
MANUAL
X16
IIIIIIIIII IIIIIIIIII|10
IIIIIIIIII IIIIIIIIII
|15
White Balance
Use this function when adjustment of the colour output is needed.
1. Move the triangular cursor to WHITE BAL on the Set Up Menu screen, using the Up and Down buttons
2. Select the desired mode using the Left and Right buttons.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
3. Select the most appropriate mode for the prevailing installation conditions.
• ATW: Use this mode when the colour temperature is from 1,800K to 10,500K.
• AWB: Use this mode when the colour temperature is from 3,000K to 7,000K.
• AWC SET: Direct and focus the camera toward a blank white sheet of paper and press the SET
button. If the lighting conditions change re-calibration will be required.
• MANUAL: Manual setting allows for more detailed colour control. First adjust the white balance using
either ATW or AWB. Then change to manual mode and press the SET button.
MANUAL
KELVIN
R-GAIN
B-GAIN
RETURN
10
10
IIIIIIIIII IIIIIIIIII
|
IIIIIIIIII IIIIIIIIII|
MIDDLE
NOTE
White Balance may not work correctly in the following conditions:
* When there is a very high colour temperature within the subject, for example a sunset in a clear sky.
* It is very dark
* If the camera is pointed towards uorescent light, or there is a drastic change in lighting, the White
Balance operation may become unstable.
* In these conditions, AWB mode is recommended.

15
High Resolution 1000TVL Bullet Cameras
Backlight
On this menu, back light image can be compensated by users selecting one of the modes
(HLC, BLC, and WDR).
1. Move the triangular cursor to BACKLIGHT on the Set Up Menu screen using the Up and Down buttons
2. Select the desired mode using the Left or Right buttons.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
3. HLC: If the scene contains an extremely bright light source, such as car headlights, HLC can
be used to mask them. This is especially useful for number plate recognition.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
HLC
MIDDLE
EXTERN
HLC
LEVEL
MODE
RETURN
ALL DAY
IIIIIIIIII IIIIIIIIII|10
Normal HLC

High Resolution 1000TVL Bullet Cameras
16
4. BLC (Black Light Compensation): The camera is equipped with 3D-DNR which provides intelligent light
level control to overcome strong backlit conditions.
• BLC: The BLC area can be set by the user to compensate for backlit installation environments.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
BLC
MIDDLE
EXTERN
BLC
V-POS
H-POS
H-SIZE
V-SIZE
RETURN
7
5
6
4
• H-POS: Adjust the H (Horizontal) Position of the BLC Area (1 ~ 20)
• V-POS: Adjust the V (Vertical) Position of the BLC Area (1 ~ 20)
• H-SIZE: Adjust the H (Horizontal) Size of the BLC Area (1 ~ 20)
• V-SIZE: Adjust the V (Vertical) Size of the BLC Area (1 ~ 20)
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
WDR
MIDDLE
EXTERN
WDR
WEIGHT
RETURN
HIGH
FFORDW
NORDW

17
High Resolution 1000TVL Bullet Cameras
DNR
This function makes the noise of the low light background decrease and is a highlighted feature.
1. Move the triangular cursor to DNR on the Set Up Menu screen using the Up and Down buttons.
2. Select one of the modes (OFF, LOW, MIDDLE, HIGH) to use DNR by pressing the Right or Left button.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
NOTE
* When the DNR function is activated noise cancellation is extremely effective. However, ghosting can
occur if the level is set too high.
Day & Night
The Day & Night menu is used to set the camera video output.
1. Select Day & Night using the Up or Down button on the Set Up Menu screen.
2. Select the desired mode using the Left or Right buttons. (EXTERN, AUTO, COLOUR, B&W)
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
• EXT : It can change into COLOUR or B&W Mode automatically through the connection with the
ground terminal. Users can adjust SMART-IR Level (0 ~ 20), EXTERN S/W Level, and working time of
the D/N lter.

High Resolution 1000TVL Bullet Cameras
18
6. DAY&NIGHT
SMART IR
EXTERN S / W
DELAY
RETURN
IIIIIIIIIIIIIIIIIIII 0
LOW
LOW
||
• AUTO: Automatically switches to colour during daytime and monochrome at night time, or low light
environments. The switching time is adjustable - both day to night and night to day.
6. DAY&NIGHT
SMART IR
AGC THRES
AGC MARGIN
DELAY
RETURN
IIIIIIIIIIIIIIIIIIII 0
10
10
LOW
|
IIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIII
|
|
|
|
|
|
|
• SMART IR: It is used to compensate IR Saturation (0 ~ 20)
• AGC THRES: AGC Threshold Level (0 ~ 20)
• AGC MARGIN: AGC D/N Margin Level (0 ~ 20)
• COLOUR : Making the Video Output Colour always.
• B&W : Making the video output B&W always. By selecting the colour signal On or Off, this allows the
burst signal to disappear or not.
6. DAY&NIGHT
SMART IR
RETURN
IIIIIIIIIIIIIIIIIIII 0

19
High Resolution 1000TVL Bullet Cameras
Image
This can be used when you want to select an additional function control.
1.When the Set Up Menu is displayed, select IMAGE using the Up and Down buttons.
2. Select one of the Modes using the Left or Right buttons.
7. IMAGE
SHARPNESS
GAMMA
PEDESTAL
COLOUR GAIN
MIRROR
FLIP
RETURN
0.55
OFF
OFF
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
IIIIIIIIII IIIIIIIIII|
IIIIIIIIII IIIIIIIIII|
IIIIIIIIII IIIIIIIIII|
5
8
10
• SHARPNESS: The outline of an image becomes sharp and more distinct as the level of sharpness
increases. It has better be used to adjust the value to the proper one depending on a sort of image.
(SHARPNESS : 0 ~ 10 )
• GAMMA: Gamma value is adjustable (GAMMA : 0.45 ~ 0.65)
• PEDESTAL: Pedestal value is adjustable (PEDESTAL : 0 ~ 20)
• COLOUR GAIN : Colour gain value is adjustable (COLOUR GAIN : 0 ~ 20)
• MIRROR: The image of the monitor is reversed horizontally.
• FLIP: The image of the monitor is reversed vertically.

High Resolution 1000TVL Bullet Cameras
20
System
This can be used when you want to select an additional function control.
1.When the Set Up Menu is displayed, select SYSTEM using the Up and Down buttons.
2. Select one of the Modes using the Left or Right buttons.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
8. SYSTEM
COM.
VIEW ANGLE
CVBS
LANGUAGE
RETURN
WIDE 4 : 3
NTSC
ENG
• COM: This menu is used for RS-485 Communication.
Users are able to select 'CAM ID (0 ~ 255)' and 'BAUDRATE (2400 / 4800 / 9600 / 57600 / 115200)'.
COM.
CAM ID
BAUDRATE
RETURN
1
115200
• VIEW ANGLE: Users are able to adjust aspect ratio by selecting 'WIDE 4:3', 'WIDE 16:9' or 'NORMAL'
depending on the monitor aimed for surveilance. (Default Value : WIDE 4:3)
8. SYSTEM
COM.
VIEW ANGLE
CVBS
LANGUAGE
RETURN
WIDE 4 : 3
NTSC
ENG
SYSTEM
COM.
VIEW ANGLE
XY
ADJUST
CVBS
LANGUAGE
RETURN
WIDE 16 : 9
NTSC
ENG
SYSTEM
COM.
VIEW ANGLE
XY ADJUST
CVBS
LANGUAGE
RETURN
NORMAL
NTSC
ENG