Genie CCTV TD-D62 User manual

INDOOR DOME CAMERA
INDOOR DOME CAMERA
User Manual
Day & Night Indoor Dome Camera
Ver. 1.0
GENIE CCTV LTD
CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 1LT
Tel: [phone] Fax: [phone]
www.geniecctv.com GN-July 2011 Edition

INDOOR DOME CAMERA
INDOOR DOME CAMERA
INDOOR DOME CAMERA
002
CONTENTS
COMPONENTS
WARNINGS & CAUTIONS
GENERAL FEATURES
PART NAMES
CONNECTIONS
INSTALLATION
OSD MENU SETTING
TROUBLESHOOTING
SPECIFICATION
DIMENSIONS
2
2
3
4
4
5
5
8
16
17
19
DC Type Dual Type
Contents
Components
Indoor Dome Camera
Manual
Self Tapping Screw 4 x 16
Self Tapping Screw 3 x 6
1
1
4
1
Indoor Dome Camera
Manual
Self Tapping Screw 4 x 16
Self Tapping Screw 3 x 6
DC Jack Plug (TC-0021)
1
1
4
1
1
003
Warnings & Cautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of
uninsulated dangerous voltage within the product’s enclosure
that may be of sucient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
• If you fail to read this information and handle the product incorrectly,
death or serious injury may occor.
• The unit should be installed by trained personel.
• Switch o immediately if the product emits smoke or abnomal heat.
• Never install the product in an area with exposed oil or gas
• Never install the product on a ceiling that can not hold its weight.
• Never touch the power cord with wet hands. Clean only with a dry cloth.
• Never install the product in extremely high or low temperatures.
• Never drop, hit strongly or cause the product to vibrate.
• Never expose the product to direct sunlight or other sources of bright light.

INDOOR DOME CAMERA
INDOOR DOME CAMERA
• 600TVL High Resolution
• Adjustable LED Power(With IR)
• 2D-Digital Noise Reduction
• Digital Wide Dynamic Range
004
General Features
Part Names
• BLC (Includes HLC)
• Privacy Masking
• Lens Shading Compensation
• Dead Pixel Compensation
Dome Glass
Top Case
LED Cover
LED
Camera Module
Easy AdjustableBracket
Bottom Case
Video Cable
Power Cable
WITH IR WITHOUT IR
INDOOR DOME CAMERA
INDOOR DOME CAMERA
005
Connections
Installation
DC TYPE
Video Output
(CVBS)
Monitor
Monitor
Adapter
[DC 12V]
DC Jack Plug
[TC-0021]
Adapter
[DC 12V/AC24V]
Video Output
(CVBS)
DUAL TYPE
A. SEPERATING THE BRACKET FROM BOTTOM CASE
A-1. Push Lock 1, on both sides, and slide the bracket toward the direction of the arrow.
A-2. Open the top case by pressing both sides, as shown below.
SLIDE !
Lock 2
Lock 2
Lock 1
Lock 1 PUSH !

B-8. Replace the camera top cover after completing all camera adjustments.
B-7. Open the IR LED cover by pressing the OPEN buttons on the sides of the case. Adjust
focus and zoom. Replace the IR LED cover taking care not to alter the lens settngs.
ZOOM
FOCUS
INDOOR DOME CAMERA INDOOR DOME CAMERA
B-3. Pick the power and video cables out from the ceiling void. Connect these to the camera's
power and video terminal connections.
B-4. Push the excess cable back into the ceiling void. Re-check the cable connections.
B-5. Slide the camera into the base. You'll hear a distinct "click" when it's correctly in place.
006
Installation
007
Installation
B. INSTALLATION
B-1. Make a 40mm hole in the ceiling for camera cables. Align the camera base with the hole.
B-2. Mark and drill xing holes. Screw the base into position using self tapping screws.
Ø40 Hole
Self Tapping Screw
(4 x 16 )
CLICK !
CLICK !
CLICK !
B-6. The lens can be controlled using the 3-Axis pan and tilt mechanism. Use a self tapping
screw to x the bracket to the bottom of the case.
Self Tapping Screw
(3 x 6)
190°
190°
355°
355°
130°
130°

INDOOR DOME CAMERA
008
OSD Menu Setting
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
MAIN MENU
SHUTTER
BRIGHTNESS
AGC
DWDR
RETURN
EXPOSURE
AREA SEL.
AREA STATE
GAIN
HEIGHT
WIDTH
LEFT / RIGHT
TOP / BOTTOM
RETURN
BLC
D→N LEVEL
D→N DELAY
N→D LEVEL
N→D DELAY
RETURN
D&N AUTO
CAM TITLE
MOTION
PRIVACY
PARK.LINE
IMAGE ADJ.
COMM ADJ.
LANGUAGE
VERSION
RETURN
SPECIAL
AREA SEL.
AREA STATE
GAIN
HEIGHT
WIDTH
LEFT / RIGHT
TOP / BOTTOM
RETURN
MOTION
AREA SEL.
AREA STATE
GAIN
HEIGHT
WIDTH
LEFT / RIGHT
TOP / BOTTOM
RETURN
PRIVACY
LT
LB
RT
RB
F
N
T
RET
PARKI.LINE
CAM ID
BAUD RATE
PROTOCOL
DISPLAY ID
ID POS
RETURN
COMM ADJ
LENS SHAD.
2DNR
MIRROR
FRONT COLOR
CONTRAST
SHARPNESES
DISPLAY
NEG.IMAGE.
RETURN
IMAGE ADJ
INDOOR DOME CAMERA
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
DC
ATW 1
OFF
AUTO
SETUP
009
OSD Menu Setting
Select the function using Up or Down.
Select to Change the status using Left or Right.
Icon means menu item is unavailable under certain conditions.
Extra
Video
Output
IR LED
Control
Switch
OSD
Menu
Button
WITH IR
WITHOUT IR
UP
DOWN
LEFT
SET
RIGHT
12
HIGH
HIGH
OFF
OFF
LOW
LOW
ON
ON
Extra Video OutputIR LED Control Switch
OSD Menu Button

INDOOR DOME CAMERA INDOOR DOME CAMERA
A. LENS
Using this function the screen brightness is controllable. You can select the lens type using
Left and Right.
B. EXPOSURE
Using this function, you can select or deselect ‘Flickerless’Function on Shutter Menu.
When the SETUP menu screen is displayed, select “EXPOSURE”using Up and Down.
Select the desired mode using Left and Right.
B-1. SHUTTER : Shutter speed is controllable.
B-2. BRIGHTNESS : Adjusts the image brightness.
B-3. AGC : The higher the gain level, the brighter the screen but the higher the noise.
B-4. RETURN : Select this to save the changes in the EXPOSURE menu return to the SETUP.
SHUTTER
BRIGHTNESS
AGC
DWDR
RETURN
1/60
035
_ _ _ _
OFF
RET
EXPRSURE
010
OSD Menu Setting
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
DC
ATW1
OFF
AUTO
SETUP
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
DC
ATW1
OFF
AUTO
SETUP
C-1. ATW1, ATW2: Select this when the colour temperature is between 2700°K~10500°K.
C-2. MANUAL: Select this to ne-tune the White Balance - using the ATW or AWC mode rst.
C-3. AWC -> SET: To nd the optimal luminance level, for the current environment, point the
camera toward a sheet of white paper and press the function setup switch.
If the environment changes, readjustment is required.
D-1. HLC: Enables a user to select a desired area on a picture and view that area more clearly.
011
OSD Menu Setting
C.WHITE BALANCE
Use the White Balance function to adjust the image colour.
D. BACKLIGHT
Unlike conventional cameras, this camera is designed to deliver a distinctive subject and
background at the same time; even when the subject is back light.
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
DC
ATW1
OFF
AUTO
SETUP
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
DC
ATW1
OFF
AUTO
SETUP

INDOOR DOME CAMERA INDOOR DOME CAMERA
E. DAY & NIGHT
F. DPC (Dead Pixel Compensation)
This function masks dead pixels on the CCD sensor.
It works when the lens is completely covered by hand and the set key is pressed.
E-1. COLOR: The picture is always displayed in colour.
E-2. BW: The picture is always displayed in black and white.
E-3. AUTO: The mode switches to ‘Color’ in a normal daytime environment and switches to
‘B/W’ mode when ambient illumination is low. To set up the switching time for AUTO
mode press the Function Setup switch.
COVER THE LENS
THEN
PRESS ENTER KEY
012
OSD Menu Setting
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
DC
ATW1
OFF
AUTO
SETUP
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
DC
ATW1
OFF
AUTO
SETUP
G. SPECIAL
013
OSD Menu Setting
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
DC
ATW1
OFF
AUTO
SETUP
7
F
N
V
↑
/
←
TDC2040
0
8
G
o
W
↓
=
→CLR POS END
1
9
H
p
X
{
&
2
A
I
Q
Y
}
;
3
B
J
R
Z
~
4
C
K
S
▶
,
5
D
L
T
→
.
6
E
M
U
←
■
CAM TITLE
MOTION
PRIVACY
PART.LINE
IMAGE ADJ.
COMM ADJ.
LANGUAGE
VERSION
RETURN
OFF
OFF
OFF
OFF
ENGLISH
21 01 10
RET
SPECIAL
G-1. CAM TITLE: If you enter a title, the title appears on the monitor screen.
1. When the SPECIAL menu screen is displayed, use the Up and Down keys to move the
cursor to “CAM TITLE”.
2. Set to “ON” using the LEFT and RIGHT keys.
3. Press the SET button.
4. Use the 4 directional buttons to move to a desired character, and select the letter by
pressing the set button. Repeat this process to enter multiple characters. You can enter
up to 15 letters.
5. Enter a title, move the cursor to “POS”and press the SET button to determine where, on
the image, to display the title.

INDOOR DOME CAMERA INDOOR DOME CAMERA
Note: The function is disabled when camera doesn’t have IP support.
G-2. MOTION: This product has a feature that allows you to observe and detect movement
of an object within four dierent areas of the image.
You can select up to four Motion Detection areas.
G-3. PRIVACY
Mask an area you want to hide on the screen. You can select up to six PRIVACY zones.
014
OSD Menu Setting
CAM TITLE
MOTION
PRIVACY
PARK.LINE
IMAGE ADJ.
COMM ADJ.
LANGUAGE
VERSION
RETURN
OFF
OFF
OFF
OFF
ENGLISH
21 01 10
RET
SPECIAL
CAM TITLE
MOTION
PRIVACY
PARK.LINE
IMAGE ADJ.
COMM ADJ.
LANGUAGE
VERSION
RETURN
OFF
OFF
OFF
OFF
ENGLISH
21 01 10
RET
SPECIAL
AREA SEL
AREA STATE
HEIGT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
DEGREE
VIEW
RETURN
AREA1
ON
004
004
002
002
038
ON
RET
MOTION
AREA SEL
AREA STATE
HEIGT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
DEGREE
VIEW
RETURN
AREA1
ON
032
032
020
016
000
ON
RET
PRIVACY
G-4. PARK. LINE
You can set a parking line.
I . COMM ADJ (Communication Adjustment)
COMM ADJ is a function to setup when you want the camera to communicate externally.
J . LANGUAGE
You can select the menu language according to local requirements.
015
OSD Menu Setting
CAM TITLE
MOTION
PRIVACY
PARK.LINE
IMAGE ADJ.
COMM ADJ.
LANGUAGE
VERSION
RETURN
OFF
OFF
OFF
OFF
ENGLISH
21 01 10
RET
SPECIAL
H. IMAGE ADJ
CAM TITLE
MOTION
PRIVACY
PARK.LINE
IMAGE ADJ.
COMM ADJ.
LANGUAGE
VERSION
RETURN
OFF
OFF
OFF
OFF
ENGLISH
21 01 10
RET
SPECIAL
LT
LB
RT
RB
F
N
T
RET
075
029
109
170
013
058
009
PARK. LINE
LENS SHAD.
2DNR
MIRROR
FONT COLOR
CONTRAST
DISPLAY
NEG.IMAGE
RETURN
OFF
ON
OFF
147
026
CRT
OFF
RET
IMAGE ADJ

INDOOR DOME CAMERA INDOOR DOME CAMERA
NO PICTURE
• Check if the Power is correctly connected.
• Check if all the cables are correctly connected.
CAMERA IS HOT, ABNORMAL MOVING BLACK LINES ON THE SCREEN.
• Check the camera power supply meets the necessary requirements and the mains
power supply does not have dierent ground potentials.
BLINKING SCREEN
• Check if the camera is facing toward bright sunshine or uorescent lighting.
• Check if the Auto Iris Lens is correctly connected.
UNCLEAR SCREEN
• Check if the lens is dirty. Clean with a soft lint free cloth.
NO OPERATION OF COLOUR AUTO MODE
• Check the camera is set to ‘Color’ mode.
• Check that ‘GAIN’ mode is not set to o.
NO OPERATION OF MOTION DETECTION
• Check that ‘Motion Detection’ mode is not set to o.
• Check that ‘Area’is properly congured.
NOT THE RIGHT COLOURS
• Check the ‘White Balance’ setting is correct.
If you have trouble setting up or operating the camera, refer to the following.
016
Troubleshooting
017
Specication (With IR)
Model
MODEL
VIDEO
Image Sensor
Total Pixels
Eective Pixels
Scanning System
Scanning Frequency
Synchronisation
Shutter Speed
Horizontal Resolution
S/N Ratio
Min. Illumination
Video Output
LENS
Lens
Angular Field of View
Iris Control
OPERATIONAL
On Screen Display
Day & Night
Motion Detection
Privacy Masking
White Balance
DNR
WDR
Sens-Up
Auto Gain Control
DPC
Sharpness
Heater
ENVIRONMENTAL
Operating Temp. / Storage Temp.
Operation Humidity
ELECTRICAL
DC Type
Dual Type
MECHANICAL
MECHANICAL
Dimensions
Weight
IR LED
Ingress Protection
Certications
Outside Control
Power
Power Supply
Power
Power Supply
INDOOR DOME CAMERA (WITH IR)
1/3" Sony Super HAD II CCD
NTSC: 811 (H) X 508 (V), PAL : 795 (H) X 596 (V)
NTSC: 768 (H) X 494 (V), PAL : 752 (H) X 582 (V)
2:1 Interlace
NTSC: 15.734kHz x 59.94Hz, PAL : 15.625kHz x 50Hz
Internal
NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/100,000s
600TVL (Colour) / 650TVL (B/W)
50 dB or more (AGC o)
Colour: 0.1 Lux, B/W: 0.01 Lux , (F1.2 at 30 IRE)
VBS 1.0V p-p /75Ω
[2.8~12mm] DC Auto Iris Lens (Option: IR Filter Change)
H: 102° (Wide) ~ 28° (Tele), V: 73° (Wide) ~ 21° (Tele)
Auto / Manual
Support
Colour / BW / Auto Selectable
On / O (4 Zone ISO Control/ Output OSD)
On / O (8 Areas)
ATW1, ATW2/AWC->SET/MANUAL
On / O
DWDR
N/A
OFF / LOW / MIDDLE / HIGH Selectable
On / O
Level Adjustable
Option
-10°C~+50°C / -20°C~+60°C
Under 90% (Non-condensing)
Max. DC12V 460mA [5.5W]
DC12V 500mA
Max. DC12V 540mA [6.5W]
Max. AC24V 420mA [11W]
DC12V 1.0A
AC24V 1.0A
122.5mm (W) x 111.3mm (H) x 122.5mm (D)
350g
40EA
-
CE, FCC
-

INDOOR DOME CAMERA INDOOR DOME CAMERA
Specication (Without IR)
83.5
80.8
70
102
122
UNITS : mm
Dimension
MODEL
VIDEO
Image Sensor
Total Pixels
Eective Pixels
Scanning System
Scanning Frequency
Synchronisation
Shutter Speed
Horizontal Resolution
S/N Ratio
Min. Illumination
Video Output
LENS
Lens
Angular Field of View
Iris Control
OPERATIONAL
On Screen Display
Day & Night
Motion Detection
Privacy Masking
White Balance
DNR
WDR
Sens-Up
Auto Gain Control
DPC
Sharpness
Heater
ENVIRONMENTAL
Operating Temp. / Storage Temp.
Operation Humidity
ELECTRICAL
DC Type
Dual Type
MECHANICAL
Dimensions
Weight
IR LED
Ingress Protection
Certications
Outside Control
Power
Power Supply
Power
Power Supply
INDOOR DOME CAMERA (WITHOUT IR)
1/3" Sony Super HAD II CCD
NTSC: 811 (H) X 508 (V), PAL: 795 (H) X 596 (V)
NTSC: 768 (H )X 494 (V), PAL: 752 (H) X 582 (V)
2:1 Interlace
NTSC: 15.734kHz x 59.94Hz, PAL: 15.625kHz x 50Hz
Internal
NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/100,000s
600TVL (Colour) / 650TVL (B/W)
50 dB or more(AGC o)
Colour: 0.1 Lux, B/W: 0.01 Lux , (F1.2 at 30 IRE)
VBS 1.0V p-p /75Ω
[2.8~12mm] DC Auto Iris Lens (Option : IR Filter Change)
H: 102° (Wide) ~ 28° (Tele), V: 73° (Wide) ~ 21° (Tele)
Auto / Manual
Support
Colour / BW / Auto Selectable
On / O (4 Zone ISO Control/ Output OSD)
On / O (8 Areas)
ATW1, ATW2/AWC->SET/MANUAL
On / O
DWDR
N/A
OFF / LOW / MIDDLE / HIGH Selectable
On / O
Level Adjustable
Option
-10°C~+50°C / -20°C~+60°C
Under 90% (Non-condensing)
Max. DC12V 180mA [2.15W]
DC12V 500mA
Max. DC12V 220mA [6.5W]
Max. AC24V 180mA [4.3W]
DC12V 1.0A
AC24V 1.0A
122.5mm (W) x 111.3mm (H) x 122.5mm (D)
350g
-
-
CE, FCC
-
UNITS : mm
83.5
83.5
83.5
83.5
018 019
TD-D62