Genie CCTV GSH901D User manual

INSTRUCTION MANUAL
Discreet Colour Metal Dome Camera
Product Code: GSH901D
Copyright © 2011 Genie CCTV Limited, All Rights Reserved

PRECAUTIONS
•To avoid electrical shocks, do not open up the camera.
•Use only a regulated DC 12V power supply to operate this product.
•Do not overload electrical outlets or extension cords; this could result in a fire or electric
shocks.
•Keep this product away from strong magnetic fields.
•Do not expose this product to direct sunlight or strong reflected rays.
•Servicing of the product should only be referred to a qualified person.
•The warranty will be void if the product is modified or changed in any way.
FEATURES
•1/3” Sony Super HAD CCD
•540 TVL
•Conical Pinhole Lens
•DC12V
INSTALLATION
Connect the supplied cable to the rear of the camera.
Connect the yellow BNC to the incoming video cable.
Connect the regulated DC12V power supply to the red 2.1mm power socket.
Note:
Only use a regulated DC 12V power adapter, such as the Genie PSUISM
3.7mm Sharp Cone Lens

TROUBLE SHOOTING
If this camera does not function properly, please check the following points before contacting
your authorised distributor for assistance.
sesuaCelbissoPmelborP
No video being displayed
Check the power adapter is switched on
and
correctly connected. Make sure the video cable
between the camera and monitoring equipment is
properly connected.
The image on the screen is dark Check the brightness control on the monitor.
The image on the screen is dim Make sure the lens is clean. If dirty, clean it with a soft,
clean lint free cloth.
The camera is not working properly and
the camera case is hot
Check that the power adapter is supplying a regulated
DC12V.
The contrast on the screen is too weak
A
djust the contrast feature of the monitor. The
camera may be exposed to a strong light source; if so,
change the camera position.
The image on the screen flickers Is the camera facing directly into the sun or
fluorescent light? Change the camera position
Picture rolls and jumps, scrambled picture
Incorrect
V
-hold control
setting on the monitor.
Check for ground loops if a rolling black bar is
displayed.

SPECIFICATION
•Image Sensor 1/3” Sony Super HAD CCD, 752H x 582V
•Scanning System 2:1 Interlaced
•Horizontal Resolution 540 TV Lines
•Shutter Speed Auto
•Sync. System Internal
•S/N Ratio More Than 50db (AGC Off)
•Minimum Illumination 0.1 Lux
•Video Output Composite 1.0Vp-p @75 Ω
•AGC Auto
•White Balance Auto
•Lens 3.7mm Conical Pinhole Lens
•Current Consumption 120mA Max
•Power Supply DC 12V
•Operating Temperature -20°C to 50°C
•Dimensions 53 (W) x 37 (H) x 53 (D) mm
•Weight 60g
LIMITED 3 YEARS WARRANTY
This warranty gives the original purchaser specific legal rights if our products do not function
because of a defect in materials or workmanship. We will repair or replace the product, free
of charge, for 3 years from original date of purchase.
This warranty does not cover defects caused by modification, misuse, deliberate or accident
damage or damage due to acts of god, or nature.
Edition : GN June 2011