512
GTroubleshooting
Do not install the camera in
extreme temperature conditions.
Only use the camera under conditions
where temperatures are between
-10and +50. Be especially
careful to provide ventilation when
operating under high temperatures.
It can cause the image quality to be
poor.
Severe lighting change or flicker can
cause the camera to work improperly. This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
Do not install or use the camera in an
environment where the humidity is high.
Do not install the camera under
unstable lighting conditions. Do not touch the front lens of the
camera.
Precautions
High Resolution Impact Resistant Colour Eyeball Dome Camera High Resolution Impact Resistant Colour Eyeball Dome Camera
If there are problems with the camera operation, check the tables below. If
the problem persists, please contact the agent who supplied the product.
Nothing appears on the
screen.
½Check the power connections.
½Check the video signal line connection.
Problems Troubleshooting
The video image is not
clear.
½Make sure that the lens is clean.
Clean the lens with a clean lint free cloth or
brush.
½Adjust the contrast control on the monitor.
½Make sure that the screen is not exposed
directly to a bright light.
Re-position the camera if necessary.
The screen is dark. ½Adjust the contrast control of the monitor.
½If there is an intermediate device, set the 75ohm
Hi-z correctly, and also check the connections.
½If necessary, adjust the brightness level.
There is a problem with
the camera operation.
The camera surface is
too hot and black stripes
appear on the screen.
½Check if an appropriate power source to
the camera complies with the manufacture's
standard requirement, or if the voltage is
fluctuating. Check for ground loops.