Genie BLC-015 User manual

User Manual
Please read these instructions carefully before operating the unit
and keep for further reference. All the examples and pictures used
here are for reference only. The contents of this manual are subject
to change without notice.
Secure Relay Controller for
Virdi Terminals
BLC-015

User Manual Secure Relay Controller for Virdi Terminals
2
The BLC-015 is a secure relay controller for Virdi terminals with battery monitoring
and protection circuit.
Features
• Built-iLock controller compatible with access control terminals
• Backup battery is available in case of a power outage
• Error detection – able to detect when a Network error occurs
• Status indicator – 3-colour high luminance LED
• Communication : RS485 / Wiegand
• In / Out : Door Access, RS485, Wiegand, Battery In / Out
Specifications
Power Connection
Status Indicator 3 colour LED
Sensor Input 3 port
Relay Output 1 port
Applicable Locks DC12V, Max. current 1A
Battery Life Lasts up to 2hrs during a power outage
Power DC12V
Power Consumption 80 ± 15mA
Dimensions 260 × 200 × 60 mm

User Manual Secure Relay Controller for Virdi Terminals
3
Board Feature & Connector Description
Schematic for Door Lock Interface
Connecting RS-485 Interface
RS-485 Interface

User Manual Secure Relay Controller for Virdi Terminals
4
Connecting Wiegand Interface
Wiegand Interface
Connecting Dead-Bolt Type Door Lock (Fail Safe)
Connect Dead-Bolt Lock
Connecting Strike Type Door Lock (Fail Safe)
Connecting Strike Type Lock

User Manual Secure Relay Controller for Virdi Terminals
5
Connecting EM Type Door Lock (Fail Safe)
Connecting EM Lock
Connecting Auto-Door (Contact Control)
Connect Auto Door Lock

User Manual Secure Relay Controller for Virdi Terminals
6
RS-485 ID & Open Duration Setting

Sales [phone]
Enquiries [email protected]o.uk
Website www.genieproducts.co.uk