Genius NetScroII Optical User manual

NetScroII Optical
PS/2
DEUTSCH
USB & PS/2 version
ENGLISH
FRANCAIS
ITALIAN0
ESPAtiOL
User’s Manual

Hardware Installation
Hardware Installation
Connect the Mouse to Your Computer
Note: Always turn off your computer before you connect or disconnect
your mouse unless you’re using a USB device in Win98.
1. You can connect the mouse to either a USB or PS/2
port.
Connecting USB
to 6-pin port
2. For the USB mouse port, connect your mouse to the USB port on your
computer.
3. If you have a PS/2 port and you are using the USB-PS/2 model, then you
need to use the 6-pin PS/2 adapter.
4. Turn on your computer.
Warning: Please do not use Net&roll Optical on a desk which is made of
glass, mirror, iron, or black velvet. Also, aflat surface is necessary or the
Optical Sensor will error easily.
Software Installation
Installing the MouseMate software
1. Insert the MouseMate98-NetScroll Optical software diskette into drive
AorB.
2. Open the “Start” menu (Ctrl & Esc), and select “Run”.
3. Type A:SETUP (or B:SETUP) in the command line box and select
“OK”.
4. Follow the instructions on the screen, and when the installation is com-
plete, restart your computer.

Factory Settings
Factory Settings
Magic-Roller
Left Button
Right Button
Roller Button
Side Buttons
Press the “Magic-Roller” to surf the Internet and Win-
dows documents
Provides traditional mouse functions such as click,
double click and drag.
You can assign this button frequently used keyboard
and mouse functions in addition to features like Easy-
Jump, Auto-Panning, Zoom, etc.
You can assign this button frequently used keyboard
and mouse functions in addition to features like Easy-
Jump, Auto-Panning, Zoom, etc.
You can assign certain functions to the upper or lower
side button with the roller.
Horizontal Scrolling
Hold the Shift key while pressing the Magic-Roller in the direction you
want to go or move the cursor over the horizontal scroll bar and press
the Magic-Roller.
Button Assignments
The Button Assignment feature lets you work in a more efficient way
because you can assign the most frequently used commands in Windows
to the mouse buttons.
2

1
l
MouseMate Software Features
Side Buttons: You can assign the following functions (Applica-
tion/Document, Horizontal Scroll, Last/Next Page, and Zoom In/Out) to
the upper or lower side button with the roller.
MouseMate Software Features
Browsing Speed
Browsing
Direction
Button Find
Trails
Loop
You can adjust the browsing speed when you surf
the Internet or Windows documents.
Move the “Magic-Roller” forward and the screen
will browse to the top of the document. Move it in
reverse and the document will go in the opposite di-
rection
Automatically positions the cursor on the default
button, usually the OK button, when the dialog box
appears on your screen.
This option makes it easier to find the cursor when
using an LCD monitor. This option cannot be used
if your monitor does not support it.
When you move the cursor to the top (or bottom) of
the screen, it will automatically move the cursor to
the bottom (or top) .of the screen.
,
3

MouseMate Software Features
Mouse Speed
This function lets you adjust the speed at which the
pointer moves across the screen.
&
Double Click
Use this function to set the double click speed of the
* Speed mouse.
Select this option if you want to have NetScroll Op-
tical operate with the right mouse button as the pri-
mary button.
Pointers Folders This lets you change the shape of the cursor.
Office 97 Mode
Genius Mode
Abdut
orientation
Only supports Microsoft Office 97 along with some
new applications. Features include zoom, scrolling
and Auto-scrolling features. It’s similar to Micro-
soft’s IntelliMouse.
Supports all applications that use scrollbars, includ-
ing Office97, with zoom, Auto-panning, and scroll-
ing functions.
Click here to open the Genius Homepage
“www.geniusnet.com.tw”
This function lets you set the angle when you move
the mouse upward. It gives you a more comfortable
angle when holding the mouse. This function works
best with a portable trackball.
4

MouseMate Software Features
EasyJump for Windows
EasyJump lets you open eight special functions quickly.
Internet Access
Close AP
Close the application you are using.
Horizontal
Vertical
Start
Moves the cursor to the horizontal scroll bar.
Moves the cursor to the vertical scroll bar.
Activates the Windows Start menu.
Internet Access This function opens Browser to access the Internet.
Help
This opens the Help menu.
Control Panel
Opens the NetScroll Optical control panel.
Auto-Panning
Move the mouse, and the document will move in
the direction you move the mouse.
Switch Applications
When the right-button or Magic-Roller is set to “Switch AP”, you can
quickly switch from one open application to another without moving the
mouse. To switch to a specific application, press the the right button or
the Magic-Roller to select the application.
Zoom function for Office 97 and IE4.01 Applications
Press the “Ctrl” key and move the “Magic-Roller” forward (or back-
ward) to set the Zoom In/Out function. You can also use just one hand to
Zoom In/Out: set the right button to be the ‘Ctrl” function, press the
right button and move the “Magic-Roller” forward (or backward) to en-
large (or decrease) the document window.
5

Troubleshooting
Auto-Panning
You can set this function in the Button Assignment menu. Move the
mouse, and the document moves in the direction you just moved.
Uninstall NetScroll Optical
Follow these instructions to remove the NetScroll Optical software from
your hard disk. In Windows 95/98/NT,click on the Start button, select
Programs and move to NetScroll Optical. Then click on Uninstall Net-
Scroll Optical.
Customize NetScroll Optical
This section shows you how to customize NetScroll Optical. To open the
NetScroll.Optical control panel, you can double-click on the icon in the
task bar or select the “Genius NetScroll Optical” icon from the NetScroll
Optical program group.
Clo.se the NetScroll Optical Software
Click the right button on the taskbar, and select “Close NetScroll Opti-
cal” to close the software.
Troubleshooting
Q- Why can’t my NetScroll Optical use the Magic-Roller function after I in-
stalled the driver under Windows 95/98/NT?
A. 1. Make sure
NetScroll Optjcal is properly connected.
2.
Make sure there are no other driver conflicts in Windows 95/98/NT.
To do this:
A.
Open the “Control Panel” from “My Computer”.
B.
Run “System” icon, and select the “Device Manager” folder.
c. Point to item list under the “Mouse” icon.
D.
Press the “Remove” button to remove the other Mouse Driver.
E.
Re-install the NetScroll Optical driver.
6