Genius SW-5.1 1800 User manual

English
1
INSTALLATION
To prevent malfunction and/or damage to speaker or other devices, always turn down the
volume, and turn off the power on all devices before making any connections.
Wired Control
(A) Connecting the speakers to the Subwoofer
For the five sets of wires included: use the black/white wire to connect to the RED positive
terminals and use the black wire the BLACK negative terminals on the back of the subwoofer
and speakers as explained below.
1. Connect the FR speaker to the OUTPUT-FRONT (R) spring tags of the subwoofer.
2. Connect the FL speaker to the OUTPUT-FRONT (L) spring tags of the subwoofer.
3. Connect the SR speaker to the OUTPUT-SURROUND (R) spring tags of the subwoofer.
4. Connect the SL speaker to the OUTPUT-SURROUND (L) spring tags of the subwoofer.
5. Connect the CEN speaker to the OUTPUT-CEN spring tags of the subwoofer.
(B) Connecting the Subwoofer to other Audio Sources
Connections of the subwoofer and the Audio devices for PC 5.1 channel Audio
To DVD Player
After you finish A and B above, you can turn on the “Power” on the subwoofer to experience
the 5.1CH speakers with powerful bass surround sound.
Plug in the 3.5mm-to-3.5mm cable by colors
(green, orange, black) then connect them to the
PC using the 5.1 channel rule.
Plug in the 3.5mm-to-RCA cable (by colors),
then connect them to the DVD player using the
5.1 channel rule.
Headphone jack
Volume
Bass