Genius SP-925B Instruction manual

English
-1-
1.General Functions
Turn on
Long press “Pause/Play” until blue and red LED flash in
turn.
Pairing
Once the speaker is on, it enters into automatic status; if
the speaker has been connected to a device before, it will
automatically connect to the previous device, otherwise it
will enter pairing mode.
Turn off
When device is on, long press “Pause/Play” until red LED
flashes once, and the speaker will turn off.
Automatic
turn-off
When in pairing mode, the product will shut down
automatically if it is not connected to a device for 5
minutes.
Charging
Plug the charger to port of the device. (Red LED is on).
Answer call
Short press “Pause/Play” button for an incoming call.
End call
Short press “Pause/Play” button to end call.
Second call
If a second call in comes in, short press “Pause/Play”
button to answer it, long press “Pause/Play” button to
reject it; then long press “Pause/Play” button to switch
between the two calls; short press the “Pause/Play”
button to end the current call.
Reject call
Long press “Pause/Play” button to reject incoming call.
Volume up Short Press “ ” button for volume up.
Volume
Down
Short Press “ ” button for volume down.
Next Short Press “ ” button for next music.

English
-2-
Previous Short Press “ ” button for previous music.
Play/pause
Short press “Pause/Play” button to play/pause the music
when the product is connected.
Factory reset Long press “ ” +” ” at pairing mode to reset and
clear the paired device list.
2.Pairing to a phone or entertainment device:
•Turn on your phone and ensure its Bluetooth function is activated.
•Turn on the Bluetooth speaker and go to pairing mode.
•Search for Bluetooth devices on your phone by following the phone's
instructions. Refer to your phone's user manual for more information.
•After a few seconds, the phone will list the device as a “discover device”.
•Select it and follow your phone instruction to select this pairing.
•Your phone will confirm the pairing, and then press Yes/Ok.
•Finally, select “connect with device” from your phone.
3.Line in input
When the speaker is on, SP-920BT / SP-925BT can use 3.5mm line-in jack to
listen music, Bluetooth function turns to AUX-IN mode.