Genmitsu 3018-PROVer V2 Y-Axis User manual

V1.0 Mar. 2023
INSTALLATION GUIDE
Genmitsu 3018-PROVer V2 Y-Axis
Aluminum Profile

3018-PROVer V2 Y-Axis Aluminum Profile Installation Guide
Package List
Optional Accessories (Not Included)
Dimension
Preperation
Installing Y-Axis Aluminum Profile
Wiring
3018-PROVer V2 Aluminum Spoilboard Installation Guide
Package List
Dimension
Preperation
Installing Y-Axis Aluminum Profile
Installing Aluminum Spoilboard
Wiring
3018-PROVer V2 Y-Achsen-Aluminiumprofil Installationsanleitung
Lieferumfang
Optionales Zubehör (nicht im Lieferumfang enthalten)
Dimension
Vorbereitungen
Installation des Y-Achsen-Aluminiumprofils
Verkabelung
3018-PROVer V2 Aluminium-Plattform Installationsanleitung
Lieferumfang
Dimension
Vorbereitungen
Installation des Y-Achsen-Aluminiumprofils
Aluminium-Plattform Installieren
Verkabelung
01
02
03
04
10
21
25
26
27
34
38
47
51
52
53
54
60
71
75
76
77
84
88
97

Package List
01
(2) Y-axis Aluminum Profile
1
Y-Axis Limit
Switch Cable
4Knob
7
(9) M5X22
Round Head screw
8(10) Cable Tie 93mm Allen
Wrench
10 User Manual 11
Cable of Y-Axis Motor
5Section Seal 6
Lead Screw
2(2) Polished Rod 3

Optional Accessories (Not Included)
02
Consider following optional upgrades or accessories to make your CNC experience better!
You can find them on www.sainsmart.com.
Compressed Spot
Fixed Focus FAC
Laser Module
Dust Shoe Mini T-Track
Clamp
GS-775MR
CNC Motor

550mm
360mm
226mm
Dimension
03
Notes: There will be all kinds of fixing screws in removing accessories, springs, and other parts, please
sort them properly so that the subsequent installation work can proceed smoothly.

STEP 1: Remove Acrylic Plates
04
Unscrew the acrylic plate fixing screws and remove the acrylic plates.
(4) Acrylic Plate
Fixing Screw
(4) Acrylic Plate
Fixing Screw

STEP 2: Remove the Gantry
05
1. Remove the Y-Axis limit switch cable and Y-axis motor cable from the machine.
Tip: Please record the connection of the cable before removing it by taking pictures or other methods to
facilitate subsequent wiring work.
2. Unscrew the fixing screws on the left and right sides of the gantry, and remove the gantry.
Gantry
(4) Gantry
Fixing Screw
(4) Gantry Fixing Screw

STEP 3: Remove the Original Lead Screw
06
Note: After completing this STEP, you will remove the following parts from the original machine, please
place them properly for the subsequent installation to proceed smoothly.
1. Loose the fixing screws of the lead screw.
2. Turn the knob until the lead screw is released from the lead screw
holder, and remove the original lead screw.
(2) Lead Screw
Fixing Screw
T-brass Nut Spring
Knob
Lead Screw
Holder
Original Lead Screw

STEP 4: Remove the Front Bar
07
Unscrew the front bar fixing screws and remove the front bar.
Front Bar
(4) Front Bar Fixing Screw

STEP 5: Remove the Original Aluminum Profiles
08
Unscrew the rear bar fixing screws, and remove original aluminum profiles.
Rear Bar
(4) Rear Bar Fixing Screw
Original Aluminum Profile
Original Aluminum Profile

STEP 6: Remove the Original Polished Rods
09
Unscrew the polished rod fixing screws, and remove the original polished rods.
(2) Polished Rod
Fixing Screw
Original
Polished Rod
Original
Polished Rod

STEP 7: Install Y-axis Aluminum Profile
10
Insert the screws through the round holes of the rear bar, align them with the screw holes of the new
aluminum profile, then screw them into the threaded holes.
(2) Rear Bar
Fixing Screw Rear Bar
New Aluminum Profile
(2) Rear Bar
Fixing Screw
Rear Bar
New Aluminum Profile

STEP 8: Install New Polished Rods
11
Insert the screws through the round holes of the rear bar, align them with the screw holes of the new
polished pods, then screw them into the threaded holes.
(2) Polished Rod
Fixing Screw
PUSH
PUSH
New Polished Rod
Threaded Hole End

STEP 9: Install the Aluminum Platform
12
Align the holder holes with the polished rod, push the aluminum platform for making the polished rods
slide into the platform.
Aluminum Platform
Polished Lead Screw Holder
New Polished Rod

STEP 10: Install the Front Bar
13
Insert the screws through the round holes of the front bar, align them with the screw holes of the new
aluminum profiles, then screw them into the threaded holes.
(2) Front Bar
Fixing Screw Front Bar
New Aluminum Profile
(2) Front Bar
Fixing Screw
Front Bar
New Aluminum Profile

STEP 11: Install the New Lead Screw
14
1. Align the new lead screw with the front bar hole.
2. Push the lead screw so that it passes through the front bar.
Lead Screw
PUSH

STEP 11: Install the New Lead Screw
15
3. Align the new lead screw with the threaded hole of the T-brass nut.
4. Rotate the lead screw clockwise, about five turns.
T-brass Nut New Lead Screw

STEP 11: Install the New Lead Screw
16
5. Align the T-brass nut tab with the round brass nut recess.
6. Push the screw to make the T-brass nut and round brass nut tightly together.
7. Turn the lead screw clockwise until the lead screw is approximately 40mm free of the lead screw.
Lead Screw Holder
40mm
Spring
Round Brass Nut Recess
T-Brass Nut Tab
PUSH

STEP 11: Install the New Lead Screw
17
8. Push the lead screw into the coupler, and tighten with the lead screw fixing screws after the lead screw
reaches the limit position.
Coupler
Lead Screw
(2) Lead Screw
Fixing Screw
PUSH

STEP 12: Mount Knob
18
1. Apply the screw adhesive (provide your own) to the threaded hole of the knob, then align the knob
hole with the lead screw.
2. Grasp the lead screw to prevent it from turning, then use the other hand to turn the knob clockwise
until it stops turning.
3. Release the hand, turn the knob counterclockwise, and observe if the lead screw rotates synchro-
nously with the knob, if so, the installation is complete.
4. If the lead screw does not rotate in sync with the knob, repeat STEP 12, step 2 and 3.
Lead Screw Knob