GeoMax Zoom20 Pro Series User manual

en
de
es
fr
it
pt
ru
GeoMax Zoom20/30/35 Pro Series
Quick Guide
Version 2.1

en
GeoMax Zoom20/30/35 Pro Series
Quick Guide
Version 2.1
English

Zoom20/30/35 Pro | 2Important Information about your
en
1 Important Information about your Instru-
ment
Read and follow the User Manual on the accompanying USB card before using
the product.
Keep for future reference!
Intended use • Measuring horizontal and vertical angles.
• Measuring distances.
• Visualising the aiming direction and vertical axis.
Laser products The instruments contain the following laser products:
Laser product Laser class
EDM (Electronic Distance Measurement) module
• measurements with reflectors Class 1
• measurements without reflectors Class 3R
Red laser pointer Class 3R

Important Information about Zoom20/30/35 Pro | 3
en
*optional laser product
• The classification for the EDM, red laser pointer and laser plummet is in
accordance with IEC 60825-1 (2014-05).
• The classification for the EGL is in accordance with IEC 62471 (2006-07).
CAUTION From a safety perspective, class 3R laser products should be treated as poten-
tially hazardous.
Precautions:
1) Prevent direct eye exposure to the beam.
2) Do not direct the beam at other people.
CAUTION From a safety perspective, class 2 laser products are not inherently safe for the
eyes.
Precautions:
1) Avoid staring into the beam or viewing it through optical instruments.
2) Avoid pointing the beam at other people or at animals.
EGL (Electronic Guide Light)*Exempt Group
Laser plummet Class 2
Laser product Laser class

Zoom20/30/35 Pro | 4Important Information about your
en
Locations of laser
apertures
The product must not be disposed with household waste.
a) Laser beam (EDM)
b) Laser beam (Laser
plummet)
c) Exit for laser
beam (Laser
plummet)
003691_001
a
c
b

Important Information about Zoom20/30/35 Pro | 5
en
Conformity to
national regula-
tions
• FCC Part 15 (applicable in US).
• Hereby, GeoMax AG, declares that the Zoom30 Pro/Zoom35 Pro instru-
ment is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC and other applicable European Direc-
tives. The declaration of conformity is available from GeoMax AG.
Class 1 equipment according European Directive 1999/5/EC
(R&TTE) can be placed on the market and be put into service
without restrictions in any EEA Member state.
• The conformity for countries with other national regulations not covered by
the FCC part 15 or European directive 1999/5/EC has to be approved prior
to use and operation.

Zoom20/30/35 Pro | 6Important Information about your
en
DangerousGoods
Regulations
The products of GeoMax are powered by Lithium batteries.
Lithium batteries can be dangerous under certain conditions and can pose a
safety hazard. In certain conditions, Lithium batteries can overheat and ignite.
When carrying or shipping your GeoMax product with Lithium batteries
onboard a commercial aircraft, you must do so in accordance with the
IATA Dangerous Goods Regulations.
GeoMax has developed Guidelines on “How to carry GeoMax prod-
ucts” and “How to ship GeoMax products” with Lithium batteries.
Before any transportation of a GeoMax product, we ask you to consult
these guidelines on our web page (www.geomax-positioning.com/dgr)
to ensure that you are in accordance with the
IATA Dangerous Goods Regulations and that the GeoMax products can
be transported correctly.
Damaged or defective batteries are prohibited from being carried or
transported onboard any aircraft. Therefore, ensure that the condition
of any battery is safe for transportation.

Instrument Components Zoom20/30/35 Pro | 7
en
2 Instrument Components
Instrument
components part
1 of 2
a) Detachable carrying handle
b) Optical sight
c) Objective with integrated Elec-
tronic Distance Measurement
(EDM). Exit for EDM laser beam
d) Vertical drive
e) Interface RS232/USB
f) USB host port
g) Horizontal drive
h) Second keyboard*
* Optional
b c da
e f g h
Zoom_002

Zoom20/30/35 Pro | 8Instrument Components
en
Instrument
components part
2 of 2
i) Focusing telescope image
j) Eyepiece; focusing graticule
k) Battery cover
l) Foot screw
m) Circular level
n) Display
o) Keyboard
ij
k l nm o
Zoom_003

Instrument Components Zoom20/30/35 Pro | 9
en
Keyboard The keyboard layout may differ depending on the instrument model.
a) Alphanumeric keypad
b) Navigation key
c) ENTER key
d) Function keys F1 to F4
e) ESC key
f) FNC key
g) PAGE key
Zoom_009
a
b
c
d
e
f
g

Zoom20/30/35 Pro | 10Technical Data
en
3 Technical Data
Environmental
specifications
Temperature
Protection against water, dust and sand
IP54 (IEC 60529)
Humidity
Max 95 % non condensing.
The effects of condensation are to be effectively counteracted by periodically
drying out the instrument.
Operating temperature [°C] Storage temperature [°C]
-20 to +50 -40 to +70

Care and Transport Zoom20/30/35 Pro | 11
en
4 Care and Transport
Care and trans-
port
• Carry the product in its original container or carry the tripod with its legs
splayed across your shoulder, to protect the product against shock and
vibration.
• Periodically carry out test measurements and perform the field adjust-
ments indicated in the User Manual, particularly after the product has been
dropped, stored for long periods or transported.

Zoom20/30/35 Pro | 12Operation
en
5 Operation
The battery must be charged before using it for the first time.
Turning on and
off the instru-
ment
003690_001
1
2
3
ON
OFF

GeoMax Zoom20/30/35 Pro Series
GeoMax AG
www.geomax-positioning.com
799561-2.1.0en
Original text
© 2017 GeoMax AG, Widnau, Switzerland

de
GeoMax Zoom20/30/35 Pro Serie
Quick Guide
Version 2.1
Deutsch

Zoom20/30/35 Pro | 2Wichtige Informationen über Ihr
de
1 Wichtige Informationen über Ihr Instru-
ment
Lesen und befolgen Sie die Gebrauchsanweisung auf der beigefügten USB-
Karte, bevor Sie das Produkt verwenden.
Sorgfältig aufbewahren!
Bestimmungs-
gemäße
Verwendung
• Messen von Horizontal- und Vertikalwinkeln.
• Messen von Distanzen.
• Visualisierung der Ziel- und Stehachse.
Laserprodukte Die Instrumente enthalten die folgenden Laserprodukte:
Laserprodukt Laserklasse
EDM (Elektronische Distanzmessung) Modul
• Messungen mit Reflektoren Klasse 1
• Messungen ohne Reflektoren* Klasse 3R
Roter Laserpointer* Klasse 3R

Wichtige Informationen über Ihr Instru- Zoom20/30/35 Pro | 3
de
*optionales Laserprodukt
• Die Klassifikation des EDM, des roten Laserpointers und des Laserlots
entspricht der Richtlinie IEC 60825-1 (2014-05).
• Die Klassifikation vom EGL entspricht der Richtlinie IEC 62471 (2006-07).
VORSICHT Aus Sicherheitsgründen ist der direkte Blick in den Strahl eines Klasse 3R
Lasers immer als gefährlich einzustufen.
Gegenmaßnahmen:
1) Nicht in den Strahl blicken.
2) Richten Sie den Strahl nicht auf andere Personen.
VORSICHT Aus sicherheitstechnischer Sicht können Klasse 2 Laserprodukte grundsätzlich
die Augen gefährden.
Gegenmaßnahmen:
1) Blicken Sie nicht in den Laserstrahl und betrachten Sie ihn nicht durch opti-
sche Instrumente.
2) Richten Sie den Strahl nicht auf andere Personen oder Tiere.
EGL (Elektronische Zieleinweishilfe)*Keine Einschrän-
kungen
Laserlot Klasse 2
Laserprodukt Laserklasse

Zoom20/30/35 Pro | 4Wichtige Informationen über Ihr
de
Austrittsorte der
Laserstrahlen
Das Produkt darf nicht im Hausmüll entsorgt werden.
a) Laserstrahl (EDM)
b) Laserstrahl
(Laserlot)
c) Ausgang für den
Laserstrahl
(Laserlot)
003691_001
a
c
b