GeoVision GV-OPAL S1 User manual

Quick Start Guide
OPAL-QG-A

Installing myGVcloud CamApp
myGVcloud CamApp is a free mobile application that allows you to access
GV-OPAL Cameras. Search for myGVcloud in Google Play or Apple Store or scan
the QR codes below.Next, install myGVcloud CamApp on your mobile device.
Supported Operating Systems:
1
iOS Android
Note: The following instructions are based on iOS devices.
Android version 5.0 or later
iOS version 9.0 or later

Registering a myGVcloud Account
Your GV-OPAL cameras are assigned to a myGVcloud account. There are two
ways to register a myGVcloud Account on myGVcloud CamApp.
1. Registration via signing up
2. Registration via Gmail
2
Registering via Signing Up
1. Tap Sign up an account.
Login
Sign in with Google
Demo
Sign up an account

3. An e-mail with a confirmation link will be sent to your e-mail account. You must click
the link to activate your myGVcloud account.
3
2. Type your E-mail account for the Username, a Password and a Hint for your
password.

Registration via Gmail
4
1. Tap Sign in with Google.
2. Type your Gmail username and password that you want to use for logging into
myGVcloud CamApp.
You can use your Gmail account to sign up with myGVcloud CamApp.
After signing into your Gmail account, it will provide instant login to myGVcloud CamApp.
Login
Sign in with Google
Demo
Sign up an account

Adding GV-OPAL Cameras to
myGVcloud Account
Once you have a registered myGVcloud account, you can add the GV-OPAL
cameras through myGVcloud CamApp V3.0.
5
2. Click Next.
1. On the Setup Menu, tap Add.
Next

6
4. Check whether the blue light on the camera is slowly flashing. Click Yes.
3. Click Yes to use the WiFi router that your mobile device is currently connected to,
or clickNo and type the SSID of your WiFi router. Type the password. Click Next.
Found Current SSID
Do you want to use Carol M10 in this
setup?
No Yes
Yes

7
6. On the WiFi setting page, search and click the SSID of your GV-OPAL Camera.
The SSID will be like this: GVCAM_(Mac address of your GV-OPAL Camera),
for example, GVCAM_0013E217D926.
5. Before clicking Next, go to the Settings of your mobile device.
Next

8
8. Click Done. The GV-OPAL Camera is added to your myGVcloud account.
7. Return to your myGVcloud CamApp. On this page, click Next.
Next
Done

9
9. If you want to change the WiFi router pairing to your GV-OPAL Camera, press
the powerbutton twice rapidly to let the camera enter the Access Point Mode.
After the blue light next tothe power button slowly flashes, go through step
1 to 8 within five minutes.