GeoVision GV-FEC5302 User manual

myGVcloud-QG-I-EN
myGVcloud
Quick Start Guide
EN
•GV-FEC5302/5303
•GV-HCW120
•GV-MFDC1501
•GV-UBXC1301
•GV-UBLC1301

© 2022 GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in
part, without the written consent ofGeoVision.
Every effort has been made to ensure that the information in this manual is
accurate. GeoVision, Inc. makes no expressed or implied warranty of any
kind and assumes no responsibility for errors or omissions. No liability is
assumed for incidental or consequential damages arising from the use of
the information or products contained herein. Features and specifications
are subject to change without notice. Note that memory card slot (local
storage) is not supported for Argentina.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: [phone]
Fax: [phone]
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision and the GeoVision logo are
trademarks of GeoVision, Inc. Windows is registered trademarks of
Microsoft Corporation.
October 2022

1
Contents
Important Notes ...................................................................................... 2
Note for Memory Card ......................................................................... 2
Note for GV-FEC5303 IR LED Ring ..................................................... 3
Introduction............................................................................................. 4
GV-HCW120............................................................................................. 5
Camera Overview................................................................................ 5
Connecting the Camera ....................................................................... 5
Connecting to Wired Network .............................................................. 6
Connecting to Wireless Network .......................................................... 6
GV-UBXC1301 ......................................................................................... 7
Camera Overview ................................................................................ 7
Connecting the Camera ....................................................................... 7
GV-UBLC1301.......................................................................................... 8
Camera Overview ................................................................................ 8
Connecting the Camera ....................................................................... 8
GV-MFDC1501 ......................................................................................... 9
Camera Overview ................................................................................ 9
Connecting the Camera ....................................................................... 9
GV-FEC5302 / 5303................................................................................ 10
Camera Overview .............................................................................. 10
Connecting the Camera ..................................................................... 10
Connecting PoE Converter for GV-FEC5303 ....................................... 11
Running myGVcloud CamWizard......................................................... 13
Accessing myGVcloud Portal .............................................................. 18
Accessing Live View .......................................................................... 19
Playing Back Videos .......................................................................... 20
Using GV-CloudEye .............................................................................. 23
Using myGVcloud CamViewer ............................................................. 26
Using myGVcloud CamApp TV on Android......................................... 29
Using myGVcloud CamApp on iOS ..................................................... 31
Using myGVcloud CamApp on Windows 10 ....................................... 33
Streaming Camera Live View on YouTube .......................................... 35

2
Important Notes
Note for Memory Card
1. A memory card must be detected in the GV-Cloud Camera in order to
store recordings to cloud storage.
2. The supplied micro SD card is provided as a complimentary item
without warranty.
3. Mind the following when using a memory card for recording:
a. Recorded data on the memory card can be damaged or lost if the
data are accessed while the camera is under physical shock,
power interruption, memory card detachment, or when the
memory card reaches the end of its lifespan. No guarantee is
provided for such causes.
b. The stored data can be lost if the memory card is not accessed for
a long period of time. Back up your data periodically if you seldom
access the memory card.
c. Memory cards are expendable and their durability varies
according to the conditions of the installed site and how they are
used. Back up your data regularly and replace the memory card
annually.
d. Replace the memory card when its read/write speed is lower than
6 MB/s or when the memory card is frequently undetected by the
camera.
4. It is recommended to use memory cards of the following
specifications:
a. Micro SD cards of MLC NAND flash, Class 10 for better
performance.
b. SD/SDHC cards only. SDXC and UHS-I cards are not supported.

3
Note for GV-FEC5303 IR LED Ring
Before handling GV-FEC5303, be cautious that an operating IR LED ring
may reach high temperatures of up to 60°C (140°F). Disconnect the power
supply and allow the IR LED ring to cool down before handling the device.

4
Introduction
You can remotely access your GV-Cloud Cameras from PC, mobile
devices, Smart TV.

5
GV-HCW120
Camera Overview
Connecting the Camera

6
Connecting to Wired Network
Connecting to Wireless Network
The LAN LED will flash blue,
and then turn into a solid blue.
Press the WPS button on the
camera for a few seconds.
Press the WPS button on the
router for a few seconds.
WiFi Router with WPS
Note: If the router supports wireless connection but does not have WPS
function, use an Ethernet cable to connect the camera to the router.
When you run the myGVcloud CamWizard, set the camera using
wireless connection first, and then you can unplug the Ethernet cable
after setup is completed.

7
GV-UBXC1301
Camera Overview
Micro SD card slot
Microphone
DC 5V Terminal block
LAN / PoE
Default
Audio out
Status LED
Power LED
Connecting the Camera

8
GV-UBLC1301
Camera Overview
Connecting the Camera

9
GV-MFDC1501
Camera Overview
Connecting the Camera

10
GV-FEC5302 / 5303
Camera Overview
Lens
Speaker
Microphone
Status LED
LAN / PoE
Terminal Block
Default Button
Audio Out
Micro SD
Card Slot
Connecting the Camera
1
12
Supply power and network
to the camera with:
Power adapter:
for GV-FEC5302, plug
in the power adapter
and connect a standard
network cable.
Power over Ethernet (PoE):
connect GV-FEC5302 / 5303 to a
PoE switch with a standard
network cable to supply power
and network.
Insert the supplied
micro SD card.
2
3Optionally connect
an external speaker.
1A
1A 1B
1A 1B

11
Connecting PoE Converter for GV-FEC5303
For GV-FEC5303 to have PoE function, it is required to install the PoE
Converter and IR LED ring as illustrated below.
1. Connect the PoE converter to a PoE switch with a standard network
cable. Use the RJ-45 connector on the left.
2. Connect the PoE converter and the camera with the supplied network
cable. Use the RJ-45 connector on the right.
3. Plug one of the PoE converter’s terminal blocks to the camera and the
other one to the IR LED ring.

12
IMPORTANT:
1. Due to limited space inside the PoE converter, use a standard
network cable without the rubber boot.
2. It is advised to shorten the IR LED ring’s wire to approximately 20
cm for it to fit inside the PoE converter.
20cm

13
Running myGVcloud CamWizard
1. Dow nload myGVcloud CamWizard from this link:
http://www.geovision.com.tw/myGVcloud/download.asp
2. Unzip the downloaded file, and double-click Setup to run myGVcloud
CamWizard.
3. When the Wizard appears, click Next to search GV-Cloud Cameras
on the network.

14
4. Select a camera. Click Next.
5. When the message pops up, click Yes to skip the advanced network
settings.

15
6. Create a username and password for the camera’s Web interface.
Click Next.
IMPORTANT: You will need this information to access the Web interface
of the camera. If you forget the username and password, you will need to
reset your camera to factory defaults.
7. S elect Create a new myGVcloud account. Click Next.
8. To create a myGVcloud account, type your e-mail for the Account, a
Password and a Password Hint.

16
9. C lick Next to complete the setup process. An e-mail with a
confirmation link will be sent to your e-mail account.
10. Cl ose the Wizard.
11. Check your e-mail and click the confirmation link to activate your
myGVcloud account.

17
12. After the account is activated, you will be directed to the login page of
myGVcloud Portal. You can also access myGVcloud Portal by typing
https://www.mygvcloud.com/Login.php in a Web browser.

18
Accessing myGVcloud Portal
You can use one of the following Web browsers to access myGVcloud
Portal:
 Internet Explorer 10.0 or later
 Microsoft Edge 25 or later
 Mozilla Firefox 21.0 or later
 Safari 6.0.5 or later (Mac only. Safari for Windows is not supported.)
 Google Chrome 49.0 or later
1. In the login page of myGVcloud Portal, type the Username (an e-mail
address you registered with myGVcloud) and Password of your
myGVcloud account. Click Login.