GeoVision GV-PTZ010D User manual

Hardware Manual
GV-IPCam H.264
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
PT Camera
PTZ Camera
ICH264TG2V10

© 2015 GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in
part, without the written consent of GeoVision.
Every effort has been made to ensure that the information in this manual is
accurate. GeoVision, Inc. makes no expressed or implied warranty of any
kind and assumes no responsibility for errors or omissions. No liability is
assumed for incidental or consequential damages arising from the use of
the information or products contained herein. Features and specifications
are subject to change without notice. Note: no memory card slot or local
storage function for Argentina.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: [phone]
Fax: [phone]
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision, the GeoVision logo and GV
series products are trademarks of GeoVision, Inc. Windows and Windows
XP are registered trademarks of Microsoft Corporation.
September 2015

Content
Content ................................................................................i
Options ..............................................................................iii
1
3
4
6
6
8
11
12
13
13
14
15
15
17
17
19
22
Chapter 1 PTZ Camera .....................................................
1.1 Packing List..............................................................................2
1.2 Features...................................................................................
1.3 Overview ..................................................................................
1.4 Installation................................................................................
1.4.1 Ceiling Mount...............................................................
1.4.2 L-Shaped Wall Mount...................................................
1.5 Connecting the Camera..........................................................
1.6 Focus Adjustment...................................................................
1.7 I/O Terminal Block..................................................................
1.7.1 Pin Assignment..........................................................
1.7.2 Voltage Load Expansion (Optional)............................
1.8 PTZ Control............................................................................
1.8.1 The PTZ Control Panel ...............................................
1.8.2 Automatic Focus.........................................................
1.8.3 PTZ Camera Settings..................................................
1.8.4 Image Settings............................................................
1.8.5 Preset Settings ...........................................................
i

1.8.6 Sequence Settings...................................................... 25
27
30
31
33
33
35
36
38
38
38
39
39
39
40
42
1.8.7 Auto Pan Settings.......................................................
1.8.8 System Configuration.................................................
1.9 Loading Factory Default..........................................................
Chapter 2 PT Camera......................................................
2.1 Packing List............................................................................
2.2 Features.................................................................................
2.3 Overview ................................................................................
2.4 Installation..............................................................................
2.5 Connecting the Camera..........................................................
2.6 Focus Adjustment...................................................................
2.7 I/O Terminal Block..................................................................
2.7.1 Pin Assignment..........................................................
2.7.2 Voltage Load Expansion (Optional)............................
2.8 PT Control..............................................................................
2.9 Loading Factory Default ..........................................................
ii

iii
Options
Optional devices can expand your camera’s capabilities and versatility.
Contact your dealer for more information.
Device Description
Power Adapter The power adapter is available for all PT and PTZ
Camera. Contact your sales representative for the
countries and areas supported.
GV-PA191 PoE
Adapter
The GV-PA191 PoE adapter is designed to provide
power and network connection to the cameras over
a single Ethernet cable.
GV-POE Switch
The GV-POE Switch is designed to provide power
along with network connection for IP devices. The
GV-POE Switch is available in various models with
different numbers and types of ports.
GV-Relay V2
The GV-Relay V2 is designed to expand the voltage
load of GV IP devices. It provides 4 relay outputs,
and each can be set as normally open (NO) or
normally closed (NC) independently as per your
requirement.

PTZ Camera
1
Chapter 1 PTZ Camera
The GV-PTZ010D camera is a ceiling-mount device that provides panning,
tilting and zooming functions. The camera is designed to monitor a wide
area and also to focus on a specific part on the live view when suspicious
events occur. There are two models:
Model Model No. Description
GV-PTZ010D-N NTSC, IPCAM, 10x Optical Zoom,
D1, H.264, Fixed Iris
GV-PTZ010D
GV-PTZ010D-P PAL, IPCAM, 10x Optical Zoom,
D1, H.264, Fixed Iris
1

1.1 Packing List
GV-PTZ010D Mounting Base
Mounting Cover Wall Mount Bracket
Screw Anchor x 3 Long Screw x 3
Short Screw x 3
Round Screw x 3
GV-PTZ010D Software CD Washer x 3
GV-NVR Software DVD Terminal block
Warranty Card
Note: Power adapter can be purchased upon request.
2

PTZ Camera
1
1.2 Features
1/4" CCD image sensor
Dual streams from H.264, MPEG4 or MJPEG
Up to 30 fps at 704 x 480 / Up to 25 fps at 704 x 576
Day and night function (electronic)
10x optical zoom lens
10x digital zoom
Pan and tilt (Pan: -175° ~ 175°; Tilt: -45° ~ 90°)
Micro SD card slot (SD/SDHC) for local storage
Two-way audio
One sensor input and alarm output
Input-triggered Preset points
Motion detection
Privacy mask
IP address filtering
DC 12 V / AC 24 V / PoE (IEEE 802.3af)
Support for iPhone, iPad, Android and 3GPP
28 languages on Web interface
3

1.3 Overview
21 3 4 5 6 87
9
10
Figure 1-1
No. Name Description
1 DC 12V / AC 24V
Terminal Block Connects to a DV 12V or AC 24V Power Adapter.
2 LAN/PoE Connects to a 10/100 Ethernet or PoE.
3 I/O Terminal Block For details, see 1.7 I/O Terminal Block.
4 Memory Card Slot Inserts a micro SD card (SD/SDHC, version
2.0 only, Class 10) to store recording data.
5 Audio Out Connects a speaker for audio output.
6 Audio In Connects a microphone for audio input.
7 Status LED Turns green when the system operates
normally and turns off when system error
occurs.
4

PTZ Camera
1
No. Name Description
8 Power LED Turns green when the power is on and
turns off when the power is off.
9 Microphone Records the sounds.
10 Default Resets the camera to factory default
settings. For details, see 1.9 Loading
Factory Default.
5

1.4 Installation
The GV-PTZ010D / GV-PT series is designed for indoor usage. Make sure
that the installing location is shielded from rain and moisture. There are two
ways to mount the PTZ / PT Camera: Ceiling Mount and L-Shaped Wall
Mount.
1.4.1 Ceiling Mount
1. Use the mounting base to make 3 marks on the wall for screw
anchors.
wall
Figure 1-2
2. Drill the marks and insert 3 screw anchors.
3. Attach the mounting base with the PTZ / PT Camera with 3 short
screws.
Figure 1-3
6

PTZ Camera
1
4. Fix the mounting base (now with the PTZ / PT Camera attached) to
the wall with 3 long screws.
Figure 1-4
5. Put on the mounting cover. To fit the installation environment, you can
cut the parts indicated by arrows to make an opening for wires and
cables.
Figure 1-5
7

1.4.2 L-Shaped Wall Mount
You may wall-mount the GV-PTZ010D / GV-PT series with or without the
mounting cover.
1. Take the wall mount bracket and make 2 marks on the wall for
screw anchors.
wall
Figure 1-6
2. Drill the marks and insert 2 screw anchors.
3. Insert the long screws and leave enough distance (approximately 2
mm) to hang the wall mount bracket later.
Wall
2 mm
Long
Screw
Figure 1-7
8

PTZ Camera
1
4. Hang the wall mount bracket on the screws and push the wall mount
bracket downward. Make sure the long screws are tightened.
Figure 1-8
5. Without Mounting Cover
Attach the wall mount bracket with the PTZ / PT Camera using 3
washers and 3 round screws.
Screw
Washer
Figure 1-9
9

With Mounting Cover
To install the mounting cover, attach the mounting base to the
camera and then put on the mounting cover. See steps 3 and 5
in the Ceiling Mount section.
Attach the wall mount bracket with the PTZ / PT Camera using 3
round screws.
Figure 1-10
10

PTZ Camera
1
1.5 Connecting the Camera
13 4 2
2
Figure 1-11
1. Use a standard network cable to connect the camera to your network.
2. Optionally connect a speaker and an external microphone.
3. Connect power using one of the following methods:
plugging the power adapter to the power port.
using the Power over Ethernet (PoE) function to provide power
over the network cable.
4. Optionally connect to an input / output device. For details, see 1.7 I/O
Terminal Block.
5. The status LED of the camera will be on.
6. Access the camera. See 2.1. Accessing the Live View, GV-IPCam
H.264 Firmware Manual.
11

1.6 Focus Adjustment
On initial installation, it is advised that you adjust the focus for image clarity.
Print out the diagram of radiating lines included on Software DVD and hang
up the diagram at the surveillance area. Use the Zoom In / Out and Focus
In / Out buttons on the PTZ control panel from the Web interface (No.4 and
5, Figure 1-15) and adjust the PTZ Camera until it displays clear radiating
lines as shown in picture on the left.
Good focus Poor focus
Figure 1-12
To access live view for the first time or to assign an IP address, see 2.1
Accessing the Live View, GV-IPCam H.264 Firmware Manual.
12

PTZ Camera
1
1.7 I/O Terminal Block
The 3-pin terminal block, located on the back panel of the PTZ Camera,
provides the interface to one digital input and one digital output. The I/O
terminal block can be used for applications such as motion detection, event
alerts via E-Mail and FTP, and center monitoring through Center V2 and
VSM.
1.7.1 Pin Assignment
The pin assignment for the terminal block:
Pin Function
1 Output
2 GND
I/O
123
Figure 1-13 3 Input
For details on how to enable an installed I/O device, see 4.2 I/O Settings,
GV-IPCam H.264 Firmware Manual.
13