Ger Detect River-F User manual

English User Manual

English User Manual
Overview
➢Dear customer, thank you for
choosing RIVER –F WATER
DETECTOR
➢This product enables you to
detect the presence of
underground water& artesian
wells
➢RIVER –F designed to help you
discover water & walls under the
ground
➢In addition, it can confirm your
target and identify the type of
water with the depth.
Critical Warning
•••
Please be sure that all precautions
taken against risks
Do not use your device while it is
raining or on extremely wet floor
Turn on your device after you make
sure that all parts are in place
Make sure that the device battery
is fully charged before searching
If the battery start to give a peep
sound, close the device and
recharge the battery
Do not start the pulse induction
system without connecting the coil
cable to the device, other ways the
device will stop in the middle of
opening
It is recommended to read the user
manual before start working on the
device to understand everything
and to avoid mistakes doing the
search
After the device start make sound
and turn off automatically put the
battery on charge and do not try to
start the device without charging
the battery
Be aware of high voltage resources, and
do not use any charger other than the
original charger that come with the
device
Main unit of the device is under
warranty against all electronic
breakdowns for two (2) years
Any damages caused by user errors
(laying open the main unit, hits, harms
etc.) are not within this warranty
Battery and antenna are also not within
this warranty
You should follow the instructions in
this user manual strictly to minimize the
faults and to use your device correctly
F-RIVER
…WATER DETECTOR …

English User Manual
Figure (1) the long-range system components
The Long Range System
1
Figure (1) The handle
This system specializes to cover vast areas and locate the target with in 1 meter
Square up to depths of 1200 meters below the surface of the ground and Front
Range up to 3,000 square meters.
The long-range system parts
Connect the handle
to the device

English User Manual
Connect the signal boosting
sensor
Figure (2) boosting sensor
Figure (3): Transmitter antennas
Figure (4): Signal Recipient
Connect the
transmitter antennas
Connect the Signal
Recipient

English User Manual
Figure (5): (ON / OFF) button
Figure (4): Recipient Antenna
Connect the Recipient
Antenna
- Connect the battery
cable and
Switch the device
through
ON / OFF
button

English User Manual
CLICK ON THE SCREEN OF THE DEVICE TO DISPLAY THE LANGUAGES LIST
THE DEVICE WORKS ON FOUR LANGUAGES:
(GERMAN - ENGLISH - FRENCH - SPANISH - ITALIAN - ARABIC)
Figure (6): languages list
Settings menu (Sound Adjustment –brightness adjustment, and the
device information)

English User Manual
After selecting the language, you want to work in (English for example)
The water types menu will appear Select natural water for example; choose
the water type to be search for from a list of options through pressing on
the type name,
(NATURAL WATER FOR EXAMPLE)
Figure (9): Front Range Options
Select the type of soil desired in the search area:
(natural - clay - rocky - sandy - mixed - mineralized).

English User Manual
After selecting the Front Range, the digital compass will appear, Fix the
device at a 90-degree angle for the compass to work properly, then Press
the "Skip" button on the screen or the "OK" button on the keyboard.
Increase the length of the antennas receiving a signal
To able the device to detects targets even to 3000 meters

English User Manual
Figure (10): search screen
Figure (11): Increasing the length of the antennas
After pressing on skip button, the light signals will appear directly on the
screen confirming that the device is sending and receiving signals that guide
you directly towards the target.
When a signal is captured, the device will immediately turn around towards
the target.
On the smart screen, there will appear the direction of the detected target
alongside a beep at the location of the target.

English User Manual
North to South
South to North
East to West
West to East
After detecting the target, confirm the target from four directions
To determine the depth of the discovered target, stand above target and
turn
45 degrees
Walk straight ahead until the antenna reverse to the back
Figure (14): determine the depth

English User Manual
Measure the distance between the antennas reversing back and the target
center point.
The distance between the antennas reversing back and the center point is
equal the target depth
For example, if the distance is 10 m the depth of the target is 100.
Note:
You should avoid using the machine during rain and must wait for 15 days
at least after the rain stopped until the soil dry out then you can use the
device
We wish you the best of luck
in your searching
Thanks for choosing our
products

English User Manual
Warning
If you want the device work well without errors you have to follow next steps
When using the device please do not wear the watch
When using the device please do not wear the jewelry
When using the device please get away from metal, lighter and mobile phone
Please take off the belt
The shoes should not contain any metal
Stay away from the car
Stay away from electrical ground power lines or any surfacing electric