GFW 2689 User manual

Thank you for purchasing the VENETIAN CLEAR MIRROR FINISH.STOOL
Please read the instructions carefully to ensure safe operation of the product.
x 1
W420 x D300 x H460mm
COLOUR: CLEAR
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of co on.
Carefully open the pack supplied and check the contents against the parts and check list. Do not destroy any of the
packaging you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the constr of this unit. These loose items should be kept away from young
children whilst assembling your unit to avoid the danger of choking hazards.
Tools Required:
Batch No.: PO# 2689
VENETIAN STOOL CLEAR MIRROR FINISH
ASSEMBLY INSTRUCTIONS
Page 1 of 4

REFERENC
E.
INFORMATION
Due to the size of this product we recommend that it is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area
for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to
prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are ghtened and inspect regularly
Tools are not included.
WARNINGS
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
use power tools to construct this product.
ghten screws l fully assembled.
over en screws or bolts.
DO
DO
DO
DO use this product if parts are missing, damaged or worn.
DO
NOT
NOT
NOT
NOT
NOT sit or stand on the product.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
Page 2 of 4
We recommend the use of the wall fixings provided for safety reasons.
N.B. If in doubt please consult a qualified tradesperson. Warning: Always ensure the area
to be drilled is free from hidden electrical wires, water and gas pipes.
I
ASSEMBLY INSTRUCTIONS
Batch No.: PO# 2689
VENETIAN STOOL CLEAR MIRROR FINISH

Ref
CAUTION: There are many small components used in the construction of this product.
Please keep these components away from young children whilst assembling this product.
If you keep the fittings in a bowl during assembly you will be less likely to lose them!
A
ASSEMBLY INSTRUCTIONS
Qty
Thumbnail
B
2
3
4
Page 3 of 4
Batch No.: PO# 2689
1
1
1
1
1
1
8
1
С
VENETIAN STOOL CLEAR MIRROR FINISH

Page 4 of 4
ASSEMBLY INSTRUCTIONS
Batch No.: PO# 2689
VENETIAN STOOL CLEAR MIRROR FINISH
A
2
1
4
3
B
C