GFW HANNOVER NON-STORAGE BEDFRAME User manual

HANNOVER NON-STORAGE BEDFRAME ASSEMBLY
INSTRUCTIONS
Batch&No.&PO759&/&PO760&
Page&1&of&12&
Thank you for purchasing the HANNOVER NON-STORAGE BEDFRAME. Please read the instructions
carefully to ensure safe operation of the product.
Size:4’6” - 2060×1440×890
Colour: GREY HOPSACK FABRIC / BROWN FAUX LEATHER
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not destroy
any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be kept
away from young children whilst assembling your unit to avoid the danger of choking hazards.
Tools Required

HANNOVER NON-STORAGE BEDFRAME ASSEMBLY
INSTRUCTIONS
Batch&No.&PO759&/&PO760&
Page&2&of&12&
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
INFORMATION
•This product is intended for a maximum person’s weight of 130kg per side. Do not exceed this weight
•Incorrect installation could lead to injury, take care following instructions.
•Due to the size of this product we recommend that it is assembled in the room intended for use
•When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry
area for assembly
•Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to
prevent it from scratching
•Check the pack and make sure you have all the parts listed
•Ensure that this product is fully assembled and secured as illustrated before use
•Check all screws or bolts are tightened and inspect regularly.
•This product should only be used on firm, level ground.
•Dismantle for transportation.
•Only use recommended accessories.
•Tools are not included.
WARNINGS
•DO make sure the legs remain in contact with the ground.
•DO keep small parts out of reach of children.
•DO NOT use power tools to construct this product.
•DO NOT tighten screws or bolts until fully assembled.
•DO NOT over tighten screws or bolts.
•DO NOT use this product if parts are missing, damaged or worn.
•DO NOT stand on the product.
CARE INFORMATION
•Never use scourers, abrasives or chemical cleaners
•To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as
they can bleach or damage the product
&
&
&
&
&
&
&

HANNOVER NON-STORAGE BEDFRAME ASSEMBLY
INSTRUCTIONS
Batch&No.&PO759&/&PO760&
Page&3&of&12&
&
Please check the pack contents before assembling the product. If any components are missing, please
contact your retailer. The fittings pack contains small items that should be kept away from small
children.
&

HANNOVER NON-STORAGE BEDFRAME ASSEMBLY
INSTRUCTIONS
Batch&No.&PO759&/&PO760&
Page&4&of&12&
Parts

HANNOVER NON-STORAGE BEDFRAME ASSEMBLY
INSTRUCTIONS
Batch&No.&PO759&/&PO760&
Page&5&of&12&

HANNOVER NON-STORAGE BEDFRAME ASSEMBLY
INSTRUCTIONS
Batch&No.&PO759&/&PO760&
Page&6&of&12&
CAUTION: There are many small components used in the construction of this product.
Please keep these components away from young children whilst assembling this product.
If you keep the fittings in a bowl during assembly you will be less likely to lose them!

HANNOVER NON-STORAGE BEDFRAME ASSEMBLY
INSTRUCTIONS
Batch&No.&PO759&/&PO760&
Page&7&of&12&
Layout Parts on Soft Surface
Lay out all 4 sides on a soft surface i.e. Rug, Carpet or Packaging Carton

HANNOVER NON-STORAGE BEDFRAME ASSEMBLY
INSTRUCTIONS
Batch&No.&PO759&/&PO760&
Page&8&of&12&
STEP 1
Parts Required
Fully tighten all feet with Screws

HANNOVER NON-STORAGE BEDFRAME ASSEMBLY
INSTRUCTIONS
Batch&No.&PO759&/&PO760&
Page&9&of&12&
STEP2
Parts Required
Please do not tighten bolts at this stage.
&

HANNOVER NON-STORAGE BEDFRAME ASSEMBLY
INSTRUCTIONS
Batch&No.&PO759&/&PO760&
Page&10&of&12&
STEP3
Parts Required