GFW TOULOUSE 2 DOOR 1 DRAWER ROBE User manual

Size: 99 x 57 x 192 cm (WDH)
Colours: White
Finish: Painted
Thank you for purchasing the Toulouse 2 Door 1 Drawer Robe.
Please read the instructions carefully to ensure safe operation of this product.
Batch No. 111604
Page 1of 16
Tools Required
( Not Supplied ) ( Supplied )
Number of people
x2
S
1.5 Hrs Set Up
TOULOUSE 2 DOOR 1 DRAWER ROBE ASSEMBLY INSTRUCTIONS
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking.

TOULOUSE 2 DOOR 1 DRAWER ROBE ASSEMBLY INSTRUCTIONS
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Batch No. 111604
Page 2of 16
INFORMATION
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean, wipe with a damp sponge and warm soapy water. Do not use solvent based
cleaners or detergents as they can bleach or damage the product.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
WARNINGS
This product is designed to hold 30Kg in total. Do not exceed this weight.
This product should only be used on a firm and level floor.
Keep small parts out of reach of children.
Make sure the legs/base remain in contact with the floor.
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
sit or stand on the product.

TOULOUSE 2 DOOR 1 DRAWER ROBE ASSEMBLY INSTRUCTIONS
Batch No. 111604
Page 3of 16
Parts and Fittings Checklist
1
3
5
4
9999
10
11
11
12
13
14
15 16
2
6
6
7
8
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.

TOULOUSE 2 DOOR 1 DRAWER ROBE ASSEMBLY INSTRUCTIONS
Batch No. 111604
Page 4of 16
All parts are packed in two cartons
Qty: 1
Carton No: 1/2
10
10
Description: Drawer Front
Qty: 3
Carton No: 1/1
10
Description: Drawer Base
Description: Front Decor Rail
Qty: 1
Carton No: 1/2
Description: Back Panel
Qty: 1
Carton No: 2/2
Description: Leg
Qty: 4
Carton No: 1/2
7
8
9
Qty: 2
Description: Base
Qty: 1
Carton No: 1/2
Description: Fixed Shelf
Qty:1
Carton No: 1/2 Carton No: 1/2
4
5
6
Description: Back Rail
Qty: 1 Qty: 1 Qty: 1
Carton No: 1/2
Carton No: 2/2
Carton No: 2/2
123
Description:Top Panel
Description: LH Side Panel
Description: RH Side Panel
11
Description: Drawer Side
Qty: 2
Carton No: 1/2
12
Description: Drawer Back
Qty: 1
Carton No: 1/2
Qty: 1
Carton No: 2/2
10
10
Description: RH Door
Qty: 3
Carton No: 1/1
10
Description: Drawer Base
Description: Drawer Base
Qty: 1
Carton No: 1/2
Description: Drawer Base Support
Qty: 1
Carton No: 1/2
Description: LH Door
Qty: 1
Carton No: 2/2
14 1513
16

56
GScrew for Fitting Back
4
HBolt for Fitting Leg
(M6x40mm)
4
JSpring Washer
(for M6 Bolt)
Flat Washer
(for M6 Bolt) 4
4
K
L
(3x14mm)
Screw for Fitting Inner
Drawer Runner, Fitting
Anti-tilt Strap to Top &
Fitting Support for
Hanging Rail to Side
Panel
(3x12mm)
9A2
9B2
16C1
D 9
E 4
4F
Item QuantityCode
Fittings (to scale)
Bolt for Fitting Knob
(M4x20mm)
Dowel (8x30mm)
1C2 Dowel (6x30mm)
16A1
Cam Bolt for
Carcass Assembly
Cam Lock for
Carcass Assembly
(42mm overall)
16B1
10 20 30 40 50 60 70 80
Panel
TOULOUSE 2 DOOR 1 DRAWER ROBE ASSEMBLY INSTRUCTIONS
Batch No. 111604
Page 5of 16
Cover Sticker
Cam Bolt for Fitting
Drawer Sides
(35mm overall)
Cam Lock for Fitting
Drawer Sides
Euro-Screw for Fitting
Outer Drawer Runner to
Carcass

Batch No. 111604
Page 6of 16
TOULOUSE 2 DOOR 1 DRAWER ROBE ASSEMBLY INSTRUCTIONS
1
U
4X
Item QuantityCode
Fittings (to scale)
7V Bolt for Fitting Top
to Carcass
Screw for Fitting
Hinge (3x14) 24W
10 20 30 40 50 60 70 80
Screw for Fitting Drawer
Base Support to Drawer
(4x30mm)
Fittings (not to scale)
L
R
QuantityCode
1M
1N
P 1
1
4
Q
R
Item
Outer Drawer
Runner - Right
Outer Drawer
Runner - Left
Inner Drawer
Runner - Right
Inner Drawer
Knob
1S Allen Key (for M6 Bolt)
Runner - Left
L
R
Door Cushion

Batch No. 1604
Page 7of 16
TOULOUSE 2 DOOR 1 DRAWER ROBE ASSEMBLY INSTRUCTIONS
Fittings (not to scale)
General Hints & Tips
A1&A2
32mm
A1
A1&A2
B1&B2
Tighten
Stop when
Level
25mm
A2
Stop when
Level
QuantityCode
1T
6Y
Z 2
Item
Anti-tilt Strap
Hinge
Support for Hanging
O 1Hanging Rail
Rail

Batch No. 111604
Page 8of 16
For this step:
Tools required
STEP 2
STEP 1
For this step:
Tools required
TOULOUSE 2 DOOR 1 DRAWER ROBE ASSEMBLY INSTRUCTIONS
Fittings required
A1 x6
A1
A1
A1
A1
C1
C1
C1
C1
Tighten
B1
C1
B1
B1
B1
B1
Fittings required
B1 x6
C1 x4
5
2
2
6
6
7

Batch No. 111604
Page 9of 16
TOULOUSE 2 DOOR 1 DRAWER ROBE ASSEMBLY INSTRUCTIONS
For this step:
Tools required
STEP 4
STEP 3
For this step:
Tools required
Fittings required
A1
A1
A1
A1
Tighten
B1
C1
C1
C1
B1
B1
C1 C1
B1
B1
A1 x6
Fittings required
B1 x6
C1 x4
3
3

Tighten
B1
Fittings required
H x4
J x4
K x4
S
Batch No. 1604
Page 10 of 16
STEP 5
For this step:
Tools required
STEP 6
For this step:
Tools required
TOULOUSE 2 DOOR 1 DRAWER ROBE ASSEMBLY INSTRUCTIONS
A1
A1
A1
A1
H
S
J
K
A1
4
4
9
99
9
A1 x4
Fittings required
B1 x4
C1 x4
B1
B1
B1
B1
C1
C1
C1
C1
C1