GFW CHICAGO User manual

CHICAGO BED ASSEMBLY INSTRUCTIONS
Batch no.: WMI 13698
Page 1of 5
Thank you for purchasing the CHICAGO BED. Please read the
instructions carefully to ensure safe operation of the product.
1460 x 2300 x 1150mm/4ft 6 Double/ Brown/ Faux Leather
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of
construction.
Carefully open the pack supplied and check the contents against the parts and fittings check
list. Do not destroy any of the packaging until you are certain that you have all the necessary
parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose
items should be kept away from young children whilst assembling your unit to avoid the
danger of choking hazards.
Tools Required

CHICAGO BED ASSEMBLY INSTRUCTIONS
Batch no.: WMI 13698
Page 2of 5
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
This product is intended for a maximum person’s weight of 80kg per side. Do not
exceed this weight.
Due to the size of this product we recommend that it is assembled in the room
intended for use.
When you are ready to start, make sure that you have the right tools, plenty of
space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box
or on a clean floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled and secured as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Please dismantle for transportation
Tools are included.
WARNINGS
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Do not stand on the product.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based
cleaners or detergents as they can bleach or damage the product.

CHICAGO BED ASSEMBLY INSTRUCTIONS
Batch no.: WMI 13698
Page 3of 5
Parts and Fittings Checklist
Please check the pack contents before assembling this product. If any components are
missing, please contact your retailer.
The fittings pack contains small items that should be kept away from small children.
Parts
1
Headboard x 1
2
Footboard x 1
3
Support Leg x 3
4
Side Rail x 2
5
Support Bar x 1
6
Slat x 26
7
Centre Slat Cap x 13
8
Plastic Slat Cap x 26
9
Leg x 4
Fittings
Code
Description
Image
Quantity
A
M8x30mm Bolt
20
B
M8x40mm Bolt
6
C
M8x13mm Nut
6
D
M8 Spring Washer
26
E
M8 Flat Washer
26
F
5mm Allen Key
1
G
M8x70mm Spanner
1

CHICAGO BED ASSEMBLY INSTRUCTIONS
Batch no.: WMI 13698
Page 4of 5
STEP 1
PARTS REQUIRED
1. Headboard x 1
2. Footboard x 1
9. Leg x 4
STEP 2
PARTS
REQUIRED
1. Headboard x
1
2. Footboard x
1
4. Side Rail x 2
F. Allen Key x
1
A. M8x30mm x
16
D. Spring
Washer x 16
E. Flat Washer
x 16

CHICAGO BED ASSEMBLY INSTRUCTIONS
Batch no.: WMI 13698
Page 5of 5
STEP 3
PARTS REQUIRED
5. Support Bar x 1
3. Support Leg x 3
B. M8x40mm x 6
F. Allen Key x 1
A. M8x30mm x 4
D. Spring Washer x 10
E. Flat Washer x 10
C. M8x13mm x 6
G. Spanner x 1
STEP 4
PARTS REQUIRED
7. Centre Slat Caps x 13
8. Plastic Slat Cap x 26
6. Slat x 26