GFW OTTAWA User manual

Thank you for purchasing the Ottawa Dressing Table.
Please read the instructions carefully to ensure safe operation of this product.
Batch No. 271601
Page 1 of 12
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking.
Tools Required
Number of people
x2
1 Hour
Set Up
OTTAWA DRESSING TABLE ASSEMBLY INSTRUCTIONS
Size: 95 x 40 x 68.5 cm (WDH)
Colours: Gloss Black-Walnut or Gloss White-White or Gloss Black-Black
Finish: Gloss Resin Painting - Melamine Carcass

OTTAWA DRESSING TABLE ASSEMBLY INSTRUCTIONS
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Batch No. 271601
Page 2 of 12
INFORMATION
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean, wipe with a damp sponge and warm soapy water. Do not use solvent based
cleaners or detergents as they can bleach or damage the product.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
WARNINGS
This product is designed to hold 15Kg in total. Do not exceed this weight.
This product should only be used on a firm and level floor.
Keep small parts out of reach of children.
Make sure the legs/base remain in contact with the floor.
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
use power tools toconstruct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
sit or stand on the product.

OTTAWA DRESSING TABLE ASSEMBLY INSTRUCTIONS
Batch No. 271601
Page 3of 12
Parts and Fittings Checklist
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.
4
1
3
25
5
6
7
7
8
9
10
10
11
12

OTTAWA DRESSING TABLE ASSEMBLY INSTRUCTIONS
Batch No. 271601
Page 4 of 12
Drawer Back
123
Description: Top Panel Description: RH Side Panel
Qty: 1 Qty: 1
Carton No: 1/1
Description: LH Support
Qty: 1
Carton No: 1/1 Carton No: 1/1
456
Description: Plinth
Qty: 1
Description: LH Side Panel
Upright Qty: 1
Carton No: 1/1
Description: Fixed Shelf
Qty: 2
Carton No: 1/1 Carton No: 1/1
789
Description: Back Rail Description: Back Panel Description:
Qty: 2 Qty: 1 Qty: 3
Carton No: 1/1 Carton No: 1/1 Carton No: 1/1
10 11 12
Description: Drawer Side
Qty: 6
Carton No: 1/1
Description:
Drawer Front
Qty: 3
Carton No: 1/1
Description: Drawer Base
Qty: 3
Carton No: 1/1
All parts are packed in one carton

OTTAWA DRESSING TABLE ASSEMBLY INSTRUCTIONS
Batch No. 271601
Page 5 of 12
12
GNail for fitting Back
Panel (2x12mm)
Screw for fitting Runner
and Back Panel
(3.5x12.5mm)
50A
50B
14C
E 28
6F
Item QuantityCode
Fittings (to scale)
Bolt for fitting
Handle (M4x18mm)
Cam Lock
Dowel (8x30mm)
Cam Bolt
(35mm overall)
10 20 30 40 50 60 70 80