GFW Side Lift Ottoman User manual

SIDE LIFT OTTOMAN BED ASSEMBLY INSTRUCTIONS
2010mm×1060mm×840mm 3ft SINGLE
2010mm×1360mm×840mm 4ft SMALL DOUBLE
2010mm×1510mm×840mm 4ft 6 DOUBLE
2110mm×1660mm×840mm 5ft KING
Finish: Faux Leather
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list.
Do not destroy any of the packaging until you are certain that you have all the necessary parts
for the assembly.
CAUTION:There are small components used in the construction of this unit.These loose items should
be kept away from young children whilst assembling your unit to avoid the danger of choking hazards.
COLOURS: BLACK, BROWN, WHITE
Thank you for purchasing the SIDE LIFT OTTOMAN BED.
Please read the instructions carefully to ensure safe operation of the product.
Tools Required
Batch no:WMI14908
Page 1 of 19
Left Side
Right Side
5mm Allen key x 1 4mm Allen key x 1 Spanner x 1
1.5 Hour
Set Up
x 2

IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
INFORMATION
•This product is intended for a maximum person’s weight of 130kg per side. Do not exceed
this weight.
•Due to the size of this product we recommend that it is assembled in the room intended for use.
•When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
•Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent it from scratching.
•Check the pack and make sure you have all the parts listed.
•Ensure that this product is fully assembled and secured as illustrated before use.
•Check all screws or bolts are tightened and inspect regularly.
•This product should only be used on firm, level ground.
•Please dismantle for transportation
•Tools are included.
WARNINGS
•Only use the storage compartment when the frame is fully raised in the up position.
•DO make sure the legs remain in contact with the ground.
•DO keep small parts out of reach of children.
•DO use caution when operating,this bed uses a pressured mechanism.
•DO keep hands and fingers clear of the mechanism when opening and closing the bed for use.
•DO NOT use power tools to construct this product.
•DO NOT tighten screws until fully assembled.
•DO NOT over tighten screws or bolts.
•DO NOT use this product if parts are missing, damaged or worn.
•DO NOT stand on the product.
•DO NOT remain on the bed whilst the lifting mechanism is in use.
•DO NOT expose this product to dripping or splashing,rain or areas with heavy moisture.
•DO NOT place any objects filled with liquids,such as vases,on the product.
•DO NOT insert foreign objects into the product or attempt to repair this unit by yourself.
•DO NOT place the product in direct sunlight,open flames such as candles or heat,such as
radiators. Keep away from temperatures over 35ºC.
CARE INFORMATION
•Never use scourers, abrasives or chemical cleaners.
•To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners
or detergents as they can bleach or damage the product.
SIDE LIFT OTTOMAN BED ASSEMBLY INSTRUCTIONS
Batch no:WMI14908
Page 2 of 19

13
14
15
11
2
5
6
6
8
5
7
4
3
1
9
8
8
8
SIDE LIFT OTTOMAN BED ASSEMBLY INSTRUCTIONS
Batch no:WMI14908
Page 3 of 19
5
10
10
17 17
18
18
12
19
Please check the pack contents before assembling the product.If any components are
missing,please contact your retailer.The fittings pack contains small items that should
be kept away from small children.
16

Headboard end
Headboard end
1
Description: CORNER BRACKETS
Qty: 4PCS
Carton No: 1 of 2
Description: BELT
Qty: 1PC
Carton No: 1 of 2
Description: ADJUSTABLE LEGS
Qty: 4PCS
Carton No: 1 of 2
Description: RIGHT SIDE RAIL
Qty: 1PC
Carton No: 2 of 2
Description: LEFT SIDE RAIL
Qty: 1PC
Carton No: 2 of 2
Description: FOOTBOARD
Qty: 1PC
Carton No: 1 of 2
Description: HEADBOARD
Qty: 1PC
Carton No: 1 of 2
Description: CENTRE FRAME RAIL
Qty: 1PC
Carton No: 2 of 2
Description: HORIZONTAL FRAME RAIL
Qty: 2PCS
Carton No: 1 of 2
Description: SIDE FRAME RAIL
Qty: 2PCS
Carton No: 2 of 2
Description: HOLDING BLOCKS
Qty: 4PCS
Carton No: 1 of 2
Description: PLASTIC BRACKET SETS
Qty: 4PCS
Carton No: 1 of 2
Parts
2 3
4 5 6
7 8 9
10 11 12
Description: CENTRE SLAT CAPS
Qty: 4'6'': 13PCS / 5': 15PCS
Carton No: 1 of 2
Description: PLASTIC SLAT CAPS
Qty: 4'6'': 26 PCS / 5': 30 PCS
Carton No: 1 of 2
Description: BENT SLATS
Qty: 4'6'': 26 PCS / 5': 30 PCS
Carton No: 1 of 2
13 14 15
Description: WOVEN FABRIC
Qty: 1PC
Carton No: 1 of 2
Description: MATTRESS STOPPER
Qty: 2 PCS
Carton No: 1 of 2
Description: PNEUMATIC SUPPORT RAIL
Qty: 2 PCS
Carton No: 2 of 2
Description: PNEUMATIC ARM
Qty: 2 PCS
Carton No: 2 of 2
16 17 18
19
SIDE LIFT OTTOMAN BED ASSEMBLY INSTRUCTIONS
Batch no:WMI14908
Page 4 of 19

Fixings (to scale)
Ref Dimensions Qty
ABolt-M8x25 12
BBolt-M6x15 12
CBolt-M6x40 12
DFlat Washer-Ø8x16 12
ESpring Washer-Ø8x13 12
FBolt-M6x65 8
G
4mm Allen Key 1
H
5mm Allen Key 1
Nut-M8x16 2
Spanner
J
I
1
(Not to scale)
SIDE LIFT OTTOMAN BED ASSEMBLY INSTRUCTIONS
Batch no:WMI14908
Page 5 of 19
10 20 30 40 50 60 70
CAUTION: There are many small components used in the construction of this product.
Please keep these components away from young children whilst assembling this product .
If you keep the fittings in a bowl during assembly you will be less likely to lose them!
Ref Dimensions Qty

! IMPORTANT PISTON INFORMATION
R
L
17
17
Turn to page 13 for fitting the hinges
13 of 19
SIDE LIFT OTTOMAN BED ASSEMBLY INSTRUCTIONS
Batch no:WMI14908
Page 6 of 19
The pistons used in the construction of this product are extremely strong and
cannot be operated by hand when not fitted to the ottoman hinges. All pistons
are tested in the factory for correct pressure and operation before use.
Initially it might appear that the pistons are very stiff when opening and
closing the ottoman frame, THIS IS NORMAL.
After operating the ottoman a few times, the movement of the pistons and the
opening and closing of the ottoman will become easier.

Hints and Tips
Tip for difficulty with compression:
SIDE LIFT OTTOMAN BED ASSEMBLY INSTRUCTIONS
Batch no:WMI14908
Page 7 of 19
To operate the ottoman,always use 2 hands at arm's length and only where illustrated on
this product .You must ensure the mattress is on the bed frame before lifting the
mechanism. Failure to do so may result in injury.
To ensure your safety please do not stand too close in case the frame bounces up.The
weight of the mattress loaded on the frame will keep the frame in a lower position until it
is pulled upwards by the user.
If removing the mattress, make sure the frame is secured so it does not flip open. When
lifting the bed frame, remove pillows and covers.
PLEASE NOTE - It takes a lot of force to make the initial movement of the ottoman -
THIS IS A DESIGN FEATURE OF THE PRODUCT SO THAT IT DOES NOT FALL
SHUT - and the nearer to being closed the ottoman is, the easier it is to move. When the
ottoman is almost shut, it will close completely under its own weight.
When lowering the slat unit for the first time, take care to make sure it does not rub
unevenly on the inside face of the Side Rail. If it does, the bed has been assembled
slightly out of square. This can be rectified by moving the Footboard of the bed slightly to
the left or right whilst leaving the headboard of the bed frame stationary.
If you are experiencing difficulty with the initial compression try fitting one piston at a
time (following the Assembly Instructions) then press down on the side of the frame with
the piston fitted - this acts like a big lever (The weight of the mattress can be used to
supplement the load exerted). Effectively you are doubling the amount of force applied,
because you have halved the resistance offered by the pistons. It can take slightly more
effort than you might feel comfortable applying to the bed frame at first.

SIDE LIFT OTTOMAN BED ASSEMBLY INSTRUCTIONS
Batch no:WMI14908
Page 8 of 19
Do not attempt to move the bed whilst the frame is in the upright positon.

SIDE LIFT OTTOMAN BED ASSEMBLY INSTRUCTIONS
Batch no:WMI14908
Page 9 of 19
Lay out all 4 sides on a soft surface i.e. Rug, Carpet or Packaging
Carton.
Layout Parts on Soft Surface

AED
10
1
65mm M6 Bolt x8
F
4mm Allen key
H
Right side rail x 1
4
Left side rail x 1
3
Step 2 Parts Required
SIDE LIFT OTTOMAN BED ASSEMBLY INSTRUCTIONS
Batch no:WMI14908
Page 10 of 19
F
10
3
10
4
F
Step 1 Parts Required
Holding blocks x 4
10
A
E
D
10
2
AED
1
AED
2
AED
A
ED
1Headboard x 1
25mm M8 Bolt x 12
Spring washer x 12
Flat washer x 12
5mm Allen key
A
E
D
I
2Footboard x 1
I
I