GFW PRESTO LAMP TABLE User manual

No Tools Required
For more information on how to
assemble your product visit:
Person Required
x 1
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contants against the parts and fitting check list. Do not
destroy any the packaging until you are certain that you have the necessary parts for the assembly.
CAUTION: There are small components used in the constrution of this unit. These loose item should be kept
away from your children whilst assembling your unit to avoit the danger of choking hazards.
Page 1 of 9
Approximate
Assembly Time
15 mins
376
356
470
Size : (W)376 x (D)356 x (H)470 mm.
Thank you for purchasing the LAMP TABLE.
Please read the instructions carefully to ensure safe operation of the product.
PRESTO LAMP TABLE ASSEMBLY INSTRUCTIONS

Page 2 of 9
INFORMATION
This product is intended for a maximum weight of 25kgs. Do not exceed this weight.
Due to the size of this product we recommend that is assembled in the room intended for use.
When you ready to start, make sure that you have, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or not on a clean floor
to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Tools included.
WARNINGS
Do not sit or stand on the unit.
Never place hot items or liquids on the surface. Always use a heat resistand mat.
CARE INFORMATION
To clean, wipe with a damp cloth.
Never use scouters, abrasives or chemical cleaners as surface shall be scratched.
Do not use solvent based cleaners or detergents as they can bleach or damage tha paint.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.

Page 3 of 9
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fitting pack containts small items should kept away from small
children.
03
01
01 04
02
CODE PART NAME QTY
01 Side Panel (15 X 354 X 335 mm) 2
02 Bottom Panel (25 X 356 X 376 mm) 1
03 Top Panel (25 X 356 X 376 mm) 1
04 Back Panel (3 X 335 X 361 mm) 1
Parts

Page 4 of 9
Fixings (to scale)
Fixings (not to scale)
0 cm
1 cm
2 cm
3 cm
4 cm
5 cm
6 cm
4x
D7 x 50mm
A
Screw
4x
D6 x 30mm
B
Wooden Dowel
4x
D15 x 3mm
C
Plastic Cap
4x
102mm
D
Wooden leg
1x
M4
E
Hex Key
1x
30x25
F
Adhesive tape
2x
400mm
G
Disassembly Pin

STEP 1
STEP 2
Page 5 of 9
01
2X
Parts Required Qty
Panel (01) 2
B
4x
B
4x
A
D
4x
A
D
Vincular?:
Parts Required Qty
Panel (02) 1
1x
E
E

STEP 3
STEP 4
Page 6 of 9
01
03
04
Parts Required Qty
Panel (04) 1
01
03
Parts Required Qty
Panel (01) 1
Panel (03) 1

STEP 5
STEP 6
Page 7 of 9
Parts Required Qty
Panel (02) 1
01
01
04
03
Parts Required Qty
Panel (01) 1
02

STEP 7
STEP 8
Page 8 of 9
The disassembly pin can be secured at the back of the unit,
or in a safe place.
C
4x
C
Vincular?:
1x
2x
F
G
F
G

Disassembly
Page 9 of 9
Keep instructions for
future reference
Complete Assembly
G
G
To disassemble, insert the disassembly pin in the part "01" as illustred in bold. Push firmly
until fully inserted. Then genty tap panels a part.
01
Your PRESTO LAMP TABLE is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.