GFW Stockholm User manual

STOCKHOLM TWO TIER SHOE CABINET
ASSEMBLY INSTRUCTIONS
Batch No.V3-08/18
Page 1 of 14
Thank you for purchasing the STOCKHOLM TWO TIER SHOE CABINET. Please read the
instructions carefully to ensure safe operation of the product.
Size: W47.0 x D23.0 x H88.8cm
COLOUR: WHITE & OAK
1 Hour
Set Up

Page 2 of 14
INFORMATION
WARNINGS
DO NOT use power tools to construct this product.
DO NOT tighten screws until fully assembled.
DO NOT over tighten screws or bolts.
DO NOT use this product if parts are missing, damaged or worn.
DO NOT sit or stand on the product.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
cleaners or detergents as they can bleach or damage the product
FOR FUTURE REFERENCE.
This product is intended for a maximum load of 20 kg spread evenly thorough the storage
compartments. Do not exceed this weight.
Due to the size of this product we recommend that it is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
DO keep small parts out of reach of children.
Tools are not included.
This product should only be used on firm, level ground.
DO make sure the legs remain in contact with the ground.
DO make sure the legs remain in contact with the ground.
DO keep small parts out of reach of children.
DO NOT use power tools to construct this product.
DO NOT tighten screws until fully assembled.
DO NOT over tighten screws or bolts.
DO NOT use this product if parts are missing,damaged or worn.
DO NOT sit or stand on the product.
WARNINGS
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
Batch No.V3-08/18

Page 3 of 14
Please check the pack contents before assembling this product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
7
8
8
8
8
9
1 0
1 1
Batch No.V3-08/18
1 0
X2

Page 4 of 14
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
1 2 3
456
78 9
10 11
DESCRIPTION:
QTY:1 PC
DIMENSION:440X230X15MM
TOP PANEL DESCRIPTION:
QTY:1 PC
DIMENSION:765X230X15MM
LEFT SIDE PANEL DESCRIPTION:
QTY:1 PC
DIMENSION:765X230X15MM
RIGHT SIDE PANEL
DESCRIPTION:
QTY:1 PC
DIMENSION:470X230X15MM
BOTTOM PANEL DESCRIPTION:
QTY:1 PC
DIMENSION:440X50X15MM
SUPPORT PANEL DESCRIPTION:
QTY:1 PC
DIMENSION:458X75x3MM
UPSIDE BACK PANEL
DESCRIPTION:
QTY:2 PC S
DIMENSION:436X365X15MM
DRAWER FRONT PANEL
DESCRIPTION:
QTY:4 PC S
DIMENSION:426X138X12MM
DRAWER BACK SHELF PANEL
DESCRIPTION:
QTY:2 PC S
DIMENSION:426X89X12MM
DRAWER BOTTOM PANEL
DESCRIPTION:
QTY:4 PCS
DIMENSION:100Xφ35 MM
WOODEN LEGS
Xφ25
DESCRIPTION:
QTY:1 PC
DIMENSION:458X75x3MM
UNDERSIDE PACK PANEL
Batch No.V3-08/18

Page 5 of 14
If you keep the fittings in a bowl during assembly you will be less likely to lose them!
CAUTION: There are many small components used in the construction of this product.
Please keep these components away from young children whilst assembling this product.
FIXINGS (TO SCALE)
NOT TO SCALE
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
Ref Dimensions Qty
A
B
DOWEL
(6X30MM)
12
12
32
C
D
SCREWS
(4x35mm)
SCREWS
(4x14mm)
SCREWS
(4x12mm)
8
LEG BRACKETS
NAIL
F
G
H
I
15
STICKERS
4
J
E
8
K
L
MWALL FIXING
HARDWARE
OUTER AXIS
STOPER
INNER AXIS
LEFT SIDE BRACKET
RIGHT SIDE BRACKET
4
4
4
2
2
1
Batch No.V3-08/18
(1.5X10MM)

Page 6 of 14
Layout all part on a soft surface i.e. Rug,carpet or packaging carton
Layout Parts on Soft Surface
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
Batch No.V3-08/18

Page7 of 14
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
9: X2
10: X2
11: X2
B: X12
C:SCREWS X4
K:LEFT SIDE BRACKET X2
L:RIGHT SIDE BRACKET
DRAWER FRONT PANEL
DRAWER BACK SHELF PANEL
DRAWER BOTTOM PANEL
SCREWS
X2
X2
9
1 1
1 0
1 0
C
C
B
B
K
L
H
H
I
I
H
H
I
I
2: X1
3: X1
H: X4
LEFT SIDE PANEL
RIGHT SIDE PANEL
X4
OUTER AXIS
I:STOPER
Batch No.V3-08/18

Page 8 of 14
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
M
1:TOP PANEL X1
M:WALL FIXING X1
A
A
D
A
Batch No.V3-08/18
DA
A
1:TOP PANEL X1
2: X1
3:BOTTOM PANEL X1
5:RIGHT SIDE PANEL X1
A:SCREWS X8
D: X4
LEFT SIDE PANEL
DOWEL
M

Page 9 of 14
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
A
A
D
D
4: X1
A:SCREWS X4
D: X4
BOTTOM PANEL
DOWEL
7
E
E
6:
7:
E: X15
UPSIDE BACK PANEL X1
UNDERSIDE PACK PANEL X1
NAIL
Batch No.V3-08/18

Page 10 of 14
STEP 7
STEP 8
ASSEMBLY INSTRUCTIONS
X4
STOCKHOLM TWO TIER SHOE CABINET
C
C
C
C
G
G
G
G
GC
C:SCREWS X20
G:LEG BRACKETS X4
8
8
8: X4WOODEN LEGS
Batch No.V3-08/18

Page 11 of 14
WALL STRAP
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
Batch No.V3-08/18
M:WALL FIXING X1
M
M

Page 12 of 14
STEP 9
STEP 10
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
J
C
CJ
J
CJ
J
C:SCREWS X4
J:INNER AXISX4
C
1 0
C
C
1 0
C
C
C:SCREWS X4
Batch No.V3-08/18
10: X2DRAWER BACK SHELF PANEL

Page 13 of 14
STEP 11
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
Batch No.V3-08/18
F
F
F
F
F
F
F: X12STICKERS

Page 14 of 14
Your STOCKHOLM TWO TIER SHOE CABINET is now completely assembled.
Periodically check to ensure that the components are in their proper
position, free from damage.
Also, make sure the connectors are tight and secure.
Complete Assembly
Retain these instructions for future reference.
ASSEMBLY INSTRUCTIONS
STOCKHOLM TWO TIER SHOE CABINET
Batch No.V3-08/18