GFW Loire User manual

Batch no: WMI14932
Page 01 of 13
1295 x 550 x 2000 (H)/WHITE
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of
construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list.
Do not destroy any of the packaging until you are certain that you have all the necessary parts for
the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items
should be kept away from young children whilst assembling your unit to avoid the danger of
choking hazards.
Thank you for purchasing the LOIRE 3 DOOR MIRRORED WARDROBE.
Please read the instructions carefully to ensure safe operation of the product.
Tools Required
revirdwercSpillihP
Allen Key

Page 02 of 13
Batch no: WMI14932
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
•
•
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product.
•Due to the size of this product we recommend that it is assembled in the room intended for
use.
•When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
•Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent it from scratching.
WARNINGS
•This product should only be used on firm, level ground.
•Keep small parts out of reach of children.
•Make sure the legs remain in contact with the ground.
•Do not use power tools to construct this product.
•Do not tighten screws until fully assembled.
•Do not over tighten screws or bolts.
•Do not use this product if parts are missing, damaged or worn.
•
•
•
Do not sit or stand on the product.
If in doubt please
consult a qualified tradesperson. Warning: Always ensure the area to be drilled is free from
hidden electrical wires, water and gas pipes.
•When cleaningglass panels or mirrors use a damp cloth with washing up liquid or soft soap if
necessary; do not use washing powders or any other substances containing abrasives since
these substances scratch glass.
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS
•Check the pack and make sure you have all the parts listed.
•Ensure that this product is fully assembled as illustrated before use.
•Check all screws or bolts are tightened and inspect regularly.
•Tools not included.
•We recommend the use of the wall strap provided for safety reasons. N.B.
•It is essential that this unit is fixed to a wall with the fixings provided.
If a glass component is chipped or broken, stop using the product and consult the
manufacturer or supplier.
Do not strike the glass with hard or pointed items.

Parts and Fittings Checklist
Please check the pack contents before assembling this product. If any components are
missing, please contact your retailer.
The fittings pack contains small items that should be kept away from small children.
Page 03 of 13
Batch no: WMI14932
1.Top panel (1 pc) 4. Divider (1pc)
5. Shelf panel (2pcs)
3. Right side panel (1 pc)
(1pc) (1pc)
8. Back panel (1pc)
9. Back panel (2pcs) 11. Legs (4pcs)
14. Support rail (1pc) 15. Support rail (1pc) 16. Support rail (2pcs)13. Support rail (1pc)
17. Hanging rail (1pc)
21. Shelf panel (1pc)
12.Support rail (1pc)
19. Right door (1pc) 20. Mid door (1pc)
22. Shelf panel (1pc)
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS

General Hints and Tips
Fittings
Page 04 of 13
Batch no: WMI14932
Code
Item
Quantity
ABolt ( M6 x 35mm )
Bolt ( M6 x 35mm )
14
Bolt ( M6 x 55mm )
Bolt ( M6 x 60mm )
Wood Dowel ( M8 x 30mm )
Screw ( M3 x 15mm )
Cam ( 10mm x 13mm )
8
10
23
27
14
B
C
D
E
F
G
H
I
J
Cam Bolt ( M7 x 35mm ) 14
Screw ( M3 x 15mm )
8
J
Bolt ( M4 x 25mm ) 3
K
Knob 3
L
Support Pin ( M7 x 21mm )
4mm Allen Key
Spring Washer ( 1.5mm x 10mm )
Flat Washer ( 2mm x 19mm )
Rawl Plug ( M8 x 30mm )
Wall Screw ( M3 x 30mm )
16
1
8
2
2
2
2
M
N
O
P
Q
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS
the Cam Bolt. Once the Cam Bolt is inserted into the Cam, turn
180
secure.

Page 05 of 13
STEP 1
STEP 2
PARTS REQUIRED
PARTS REQUIRED
12. Support rail x 1
13. Support rail x 1
14. Support rail x 1
15. Support rail x 1
16. Support rail x 2
2.
3. Right side panel x 1
Phillip Screwdriver x 1
D. Wood dowel x 18
G. Cam bolt x 2
2
3
Batch no: WMI14932
D
D
D
D
D
D
D
D
D
D
D
D
G
G
G
G
G
G
G
G
G
G
G
G
G
14
15
16
16
13
12
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS
G. Cam Bolt x 12
Phillip Screwdriver x 1

STEP 3
STEP 4
PARTS REQUIRED
PARTS REQUIRED
12. Support rail x 1
4. Divider x 1
15. Support rail x 1
H. Cam x 2
D. Wood dowel x 3
13. Support rail x 1
14. Support rail x 1
* Pre-assembled
4
Page 06 of 13
Batch no: WMI14932
Phillip Screwdriver x 1
A. Bolt x 2
Allen key x 1
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS
4
15
12
13
14
H
H
D
D
D
A
A
12
15

STEP 5
STEP 6
PARTS REQUIRED
PARTS REQUIRED
3
13
12
4
3
15
14
4
8
Page 07 of 13
Batch no: WMI14932
* Pre-assembled
3. Right side panel x 1
8. Back panel x 1
H. Cam x 4
D. Wood dowel x 2
Phillip Screwdriver x 1
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS
H
H
H
H
D
D
12
13
15
14

STEP 7
STEP 8
PARTS REQUIRED
PARTS REQUIRED
Page 08 of 13
Batch no: WMI14932
A. Bolt x 2
H. Cam x 2
I. Allen key x 1
9. Back panel x 2
16. Support rail x 2
* Pre-assembled
* Pre-assembled
Phillip Screwdriver x 1
A
A
H
H
16
9
9
16
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS

STEP 9
PARTS REQUIRED
STEP 10
PARTS REQUIRED
1
2
3
2
Page 09 of 13
Batch no: WMI14932
* Pre-assembled
* Pre-assembled
1. Top x 1
H.Cam x 6
A. Bolt x 10
I. Allen key x 1
H
H
H
H
H
H
A
Phillip Screwdriver x 1
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS
14
16
16
13
12
15
14
15

STEP 11
STEP 12
PARTS REQUIRED
PARTS REQUIRED
Page 10 of 13
Batch no: WMI14932
11. Leg x 4
B. Bolt x 8
J. Spring washer x 8
K. Flat washer x 8
I. Allen key x 1
* Pre-assembled
* Frame 10 + 11
C. Bolt x 10
I. Allen key x 1
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS
B
J
K
I
X4
I
C
X10
10
10
13
12
3
11
11
11
11
11

STEP 13
STEP 14
PARTS REQUIRED
PARTS REQUIRED
Page 11 of 13
Batch no: WMI14932
19. Right door x 1
20. Mid door x 1
17. Hanging rail x 1
22. Shelf panel x 1
* Pre-assembled
F. Screw x 27
Phillip Screwdriver x 1
E. Bolt x 3
L. Knob x 3
M. Support pin x 4
Phillip Screwdriver x 1
X9
22
22
7
42
19
20
18
17
2
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS
F
EL
M
4
318
19
20
18 19 20
Insert the shelf support pins into the predrilled
holes suitable for the desired shelf height.

STEP 15
STEP 16
PARTS REQUIRED
PARTS REQUIRED
Batch no: WMI14932
5. Shelf panel x 2
21. Shelf panel x 1
M. Support pin x 12
Phillip Screwdriver x 1
Page 12 of 13
M
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS
N
O
P
Q
Q
N
O
P
Always ensure the area to be drilled is free from
hidden electrical wires, water and gas pipes.
5
5
21
6
wall
P. Screw x 2
O. Wall screw x 2
N. Rawl plug x 2
Phillip Screwdriver x 1
Insert the shelf support pins into the predrilled
holes suitable for the desired shelf height.

COMPLETED
Batch no: WMI14932
Page 13 of 13
LOIRE 3 DOOR MIRRORED WARDROBE ASSEMBLY INSTRUCTIONS