GHM GREISINGER G 1000 Series User manual

Quick reference guide
G 1107 / G 1113
Fine manometer | manometer
EN

Table of contents
2 / 25
B-H88.0.2X.DK2-1.1
Table of contents
1 About this documentation......................................................4
1.1 Purpose of the document................................................................4
1.2 Legal notices..................................................................................4
1.3 Further information.........................................................................4
2 Safety.......................................................................................5
2.1 Explanation of safety symbols ........................................................5
2.2 Foreseeable misuse .......................................................................5
2.3 Safety instructions..........................................................................6
2.4 Intended use...................................................................................6
3 The product at a glance..........................................................7
3.1 The G 1100 manometer series .......................................................7
3.2 Display elements............................................................................7
3.3 Operating elements........................................................................8
3.4 Connections ...................................................................................9
4 Operation...............................................................................10
4.1 Opening the configuration menu...................................................10
4.2 Open the adjustment menu...........................................................13
5 Measurement Basics.............................................................14
5.1 Special functions ..........................................................................14
5.1.1 NVLL Tare function.........................................................................15
5.1.2 F,NE High-resolution measurement with 0.1 Pa (G 1107)..............15
5.1.3 F,NE High-resolution measurement with 1 Pa (G 1113).................16
5.1.4 AVR0:02 / AVR0:05 / AVR0: 10........................................................17
6 Operation and maintenance.................................................18
6.1 Operating and maintenance notices..............................................18
6.2 Battery..........................................................................................18
6.2.1 Battery indicator............................................................................18

Table of contents
B-H88.0.2X.DK2-1.1
3 / 25
6.2.2 Changing battery..........................................................................18
7 Error and system messages.................................................19
8 Technical data .......................................................................21
9 Service ...................................................................................25
9.1 Manufacturer................................................................................25

1 | About this documentation
G 1107 / G 1113
4 / 25
B-H88.0.2X.DK2-1.1
1 About this documentation
1.1 Purpose of the document
_
–This document is intended as a quick reference option.
–It does not replace the operating manual.
–For this reason, read the operating manual before operating the product for the
first time.
1.2 Legal notices
This document is entrusted to the recipient for personal use only. Any impermissible
transfer, duplication, translation into other languages or excerpts from this operating
manual are prohibited.
The manufacturer assumes no liability for print errors.
1.3 Further information
_
Software version of the product:
–V1.1 or later
_
Link to the complete operating manual:
_
http://www.greisinger.de
For the exact product name, refer to the type plate on the rear side of the product.

G 1107 / G 1113
Safety | 2
B-H88.0.2X.DK2-1.1
5 / 25
2 Safety
2.1 Explanation of safety symbols
_
DANGER
This symbol warns of imminent danger, which can result in death, severe bodily injury,
or severe property damage in case of non-observance.
_
CAUTION
This symbol warns of potential dangers or harmful situations, which can cause damage
to the device or to the environment in case of non-observance.
_
NOTE
This symbol indicates processes, which can have a direct influence on operation or
can trigger an unforeseen reaction in case of non-observance.
2.2 Foreseeable misuse
_
The fault-free function and operational safety of the product can only be guaranteed if
applicable safety precautions and the device-specific safety instructions for this docu-
ment are observed.
If these notices are disregarded, personal injury or death, as well as property damage
can occur.
DANGER
Incorrect area of application!
In order to prevent erratic behaviour of the product, personal injury and property
damage, the product must be used exclusively as described in the chapter Description
in the operating manual.
–The product is not suitable for use in explosion-prone areas!
–The product must not be used for diagnostic or other medical purposes on pa-
tients!
–For measurements requiring devices that are subject to authorisation or special
approvals, this product is not a substitute for such products and can only be used
as an aid in preparatory or comparison measurements!

2 | Safety
G 1107 / G 1113
6 / 25
B-H88.0.2X.DK2-1.1
_
2.3 Safety instructions
_
NOTE
This product does not belong in children's hands!
2.4 Intended use
_
_
_
The device is designed as a manometer and measures even the smallest pressure
differential pressures of up to ±200 hPa with a maximum resolution of up to 0.1 Pa in
air or in non-corrosive/non-ionising gases between the two pressure connections.
G 1107
G 1113
Differential pressure
±200 hPa
±2000 hPa
Max. resolution
0.1 Pa
1 Pa
Usual applications include precise measurements of filter condition, gas flow pressure,
draught, leak integrity, dynamic pressure flow speed.
The pressure connection is made at the supplied interchangeable pressure connection
ports with suitable hoses - 4 different connection options are available as standard,
many other connection options can be used easily and reliable with G 1/8 adapters.
The product must only be used under the conditions and for the purposes for which it
was designed.
It must be handled with care and used according to the technical data (do not throw,
strike, etc.). Suitable measures must be used to protect the pressure connections and
be protected from dirt and moisture.

G 1107 / G 1113
The product at a glance | 3
B-H88.0.2X.DK2-1.1
7 / 25
3 The product at a glance
3.1 The G 1100 manometer series
LCD Display
Front view
Connection variants
Top view
3.2 Display elements
_
Display
_
Battery indicator
Evaluation of the battery status
_
Unit display
Display of the units or Min/Max/Hold information
text
_
Main display
Measurement of the current pressure or value for
min/max/hold
_
Auxiliary display
Measurement of the current pressure in
Min/Max/Hold mode
_
Bar graph
Trend display with the special function F,NE

3 | The product at a glance
G 1107 / G 1113
8 / 25
B-H88.0.2X.DK2-1.1
3.3 Operating elements
_
On / Off button
Press briefly
Switch on the product
Activate / deactivate lighting
Long press
Switch off the product
Reject changes in a menu
_
Up / Down button
Press briefly
Display of the min/max value
Change value of the selected parameter
Long press
Reset the min/max value of the current measure-
ment
Both simultaneously
Rotate display, overhead display
_

G 1107 / G 1113
The product at a glance | 3
B-H88.0.2X.DK2-1.1
9 / 25
Function key
Press briefly
Freeze measurement (Hold)
Return to measurement display
Call up next parameter
Long press, 2s
Start menu configuration, (ONF appears in the
display
Close menu, changes are saved
Long press, 4s
Depending on the selected special function: Activa-
tion of the Tare function NVLL, high-resolution
measurement F,NE or rapid measurement with
mean value AVR
3.4 Connections
Universal connection
Interchangeable pressure connection via G1/8"
thread.

4 | Operation
G 1107 / G 1113
10 / 25
B-H88.0.2X.DK2-1.1
4 Operation
4.1 Opening the configuration menu
1. Press the Function key for 2 seconds to open the Configuration menu.
2. (ONF appears in the display. Release the Function key.
_
Parameter
Values
Meaning
_
Display unit
UN,T
Pa
(G 1107 )
HPa
mBaR
BaR
(G 1113 )
PSI
mmKG
_

G 1107 / G 1113
Operation | 4
B-H88.0.2X.DK2-1.1
11 / 25
Activatable special functions
NVLL
Tare function available
G 1107
F,NE
High-resolution measurement with 0.1 Pa activata-
ble
G 1113
F,NE
High-resolution measurement with 1 Pa activatable
AVR 0:02 / AVR
0:05 / AVR 0: 10
Rapid measurement with mean value over 2 s / 5 s
/ 10 s activatable
_
Measuring rate
RATE
Selection of the measurement speed
SLO
Slow
FAST
Fast
_
Resolution
RANG
Selection display resolution
AVTO
Automatic switchover
_

4 | Operation
G 1107 / G 1113
12 / 25
B-H88.0.2X.DK2-1.1
G 1107
K,
Adjusted to the highest value, e.g. -200.0.. +200.0
hPa
LO
Adjusted to the lowest value, e.g. -20.00 .. +20.00
hPa
G 1113
K,
Adjusted to the highest value, e.g. -2000 .. +2000
hPa
LO
Adjusted to the lowest value, e.g. -200.0.. +200.0
hPa
_
Shut-off time
POFF
OFF
No automatic shut-off
0:15 0:30 1:00 4:00
12:00
Automatic shut-off after a selected time in hours
and minutes, during which no buttons have been
pressed
_
Backlight
L,TE
OFF
Backlight deactivated
0:15 0:30 1:00 4:00
Automatic shut-off of the backlight after a selected
time in minutes and seconds, during which no
buttons have been pressed
ON
No automatic shut off of the backlight
_
Factory settings

G 1107 / G 1113
Operation | 4
B-H88.0.2X.DK2-1.1
13 / 25
IN,T
NO
Use current configuration
YES
Reset product to factory settings. IN,T DONE appears
in the display
4.2 Open the adjustment menu
For information refer to the operating manual!

5 | Measurement Basics
G 1107 / G 1113
14 / 25
B-H88.0.2X.DK2-1.1
5 Measurement Basics
5.1 Special functions
_
With the special functions that can be selected via the Configuration menu, the device
can be optimised for special measuring tasks. After it is switched on, the device starts
up in standard measuring mode, the relevant special function is started by pressing
and holding the Function key for 4 s.
_
CAUTION
Air pressure at port variant UT!
With higher pressures greater than 1 bar, the hoses must be secured to prevent
unintended loosening. Suitable GDZ hose clamps are used for this purpose.
–6x1 mm PVC GDZ-01. Up to 5 bar rel., vacuum-suitable!
–6x1 mm PE GDZ-02. Up to 10 bar rel., vacuum-suitable!
–6x1 mm PUR GDZ-03. Up to 9 bar rel., vacuum-suitable!

G 1107 / G 1113
Measurement Basics | 5
B-H88.0.2X.DK2-1.1
15 / 25
5.1.1 NVLL Tare function
The special function FVNC NVLL has been selected in the configuration menu.
The display can be zeroed by pressing the Function key for 4 s. If the tare function is
activated, NVLL blinks in the lower display. The tare function can be reset by pressing
the Function key again for 4 s.
NOTE
The tare function is independent of the zero point correction accessible via the settings
menu.
5.1.2 F,NE High-resolution measurement with 0.1 Pa (G 1107)
High-resolution measurement for the finest adjustment work, 4 Pascal Test (test of
chimney draft with living-space-independent single combustion) and many other finely-
adjusted pressure applications.
In the Configuration menu, the special function FVNC F,NE has been selected.
The high-resolution measurement can be activated by pressing and holding the Func-
tion key for 4 s. Then the sensor is immediately zeroed and the optimised parameters
for this measurement are activated.
CAUTION
When starting the special function, make sure that there is no pressure at the connec-
tions.
NOTE
The increased current consumption in this mode decreases battery life.
The quickly determined measurement replaces other devices, such as a U-tube ma-
nometer. The four bars in the lower display provide additional support.
–The two middle bars appear: Measurement is stable
–Left bars appear: the measurement decreases
–Right bars appear: the measurement increases

5 | Measurement Basics
G 1107 / G 1113
16 / 25
B-H88.0.2X.DK2-1.1
_
By pressing and holding the Function key for 2 s., the special function can be activated.
END FVNC appears in the display.
5.1.3 F,NE High-resolution measurement with 1 Pa (G 1113)
High-resolution measurement for the finest adjustment work and many other applica-
tions with the finest adjustment of pressure.
In the Configuration menu, the special function FVNC F,NE has been selected.
The high-resolution measurement can be activated by pressing and holding the Func-
tion key for 4 s. Then the sensor is immediately zeroed and the optimised parameters
for this measurement are activated.
CAUTION
When starting the special function, make sure that there is no pressure at the connec-
tions.
NOTE
The increased current consumption in this mode decreases battery life.
The quickly determined measurement replaces other devices, such as a U-tube ma-
nometer. The four bars in the lower display provide additional support.
–The two middle bars appear: Measurement is stable
–Left bars appear: the measurement decreases
–Right bars appear: the measurement increases
_
By pressing and holding the Function key for 2 s., the special function can be activated.
END FVNC appears in the display.

G 1107 / G 1113
Measurement Basics | 5
B-H88.0.2X.DK2-1.1
17 / 25
5.1.4 AVR0:02 / AVR0:05 / AVR0: 10
Fast measurement with mean value over 2 s / 5 s / 10 s
Mean value mode for measurement of heavily fluctuating pressures.
In the Configuration mode, a special function AVR0:02, AVR0:05 or AVR0: 10 has been
selected.
By pressing and holding the Function key for 4 s. the measurement with mean value
can be activated.
_
Heavily fluctuating values arise particularly with dynamic pressure/compression meas-
urements in chimney draft tests of forced-air burners and, consequently, conventional
electronic manometers are not adequate for task. This special function optimises the
device for this application purpose.
The different mean value times of 2, 5 or 10 seconds can be selected depending on
the requirement.
_
The first parameter is shown in the auxiliary display.
_
By pressing and holding the Function key for 2 s., the special function can be activated.
END FVNC appears in the display.
_
If the Tare function is activated when called up, this special function AVRcan be reset
by pressing and holding the Function key for 4 s. In order to reactivate the Tare, the
special function must be switched in the configuration menu.

6 | Operation and maintenance
G 1107 / G 1113
18 / 25
B-H88.0.2X.DK2-1.1
6 Operation and maintenance
6.1 Operating and maintenance notices
_
NOTE
Pressure connections must be protected from soiling.
6.2 Battery
6.2.1 Battery indicator
_
For additional information, refer to the operating manual!
6.2.2 Changing battery
_
Only use new, high-quality and suitable alkaline batteries!
For additional information, refer to the operating manual!

G 1107 / G 1113
Error and system messages | 7
B-H88.0.2X.DK2-1.1
19 / 25
7 Error and system messages
Display
Meaning
Possible causes
Remedy
----
Calculation not
possible
Measurement data
acquisition is run-
ning
Waiting for data collection
No display,
unclear
characters
or no re-
sponse
when but-
tons are
pressed
Battery depleted
System error
Product is defective
Battery depleted
Error in the product
Product is defective
Replace battery
Send in for repair
BAT
Battery depleted
Battery depleted
Replace battery
BAT LO
Battery depleted
Battery depleted
Replace battery
ERR.1
Measuring range
exceeded
Measurement too
high
Product is defective
Stay within allowable meas-
urement range
Send in for repair
ERR.2
Measuring range is
undercut
Measurement too
low
Product is defective
Stay within allowable meas-
urement range
Send in for repair
ERR.3
Display range has
been exceeded
Incorrect display unit
Incorrect resolution
F,NE Function active
Correct setting
Deactivate function

7 | Error and system messages
G 1107 / G 1113
20 / 25
B-H88.0.2X.DK2-1.1
ERR.4
Display range has
been undercut
Incorrect display unit
Incorrect resolution
F,NE Function active
Correct setting
Deactivate function
SYS ERR
System error
Error in the product
Switch product on/off
Replace batteries
Send in for repair